Condensate Treatment Equipment For Water And Wastewater Near Yukon
-
Manufactured by Crane Pump & Systemsbased in USA
Deming Non- Clog Vertical Column Sump Pumps are designed to handle various fluids from drainage water or any liquid waste containing small, non-fibrous solids to larger industrial processes. Their advanced design provides trouble-free service and low-cost ...
-
Manufactured by Crane Pump & Systemsbased in USA
Weinman Non- Clog Vertical Column Sump Pumps are designed to handle various fluids from drainage water or any liquid waste containing small, non-fibrous solids to larger industrial processes. Their advanced design provides trouble-free service and low-cost ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA’s compact designed Zero Gas Generator ZNV-7 is used for mobile, stationary or laboratory scale zero point checking & diluting span gas sources for the calibration of ambient air ...
-
Manufactured by Applied Analytics, Inc.based in USA
The TLG-837-SP Analyzer and Applied Analytics DEMISTER Probe is used to monitor the level of H2S that accumulates in the headspace of the sulfur ...
-
Manufactured by Applied Analytics, Inc.based in USA
H2S is an extremely dangerous chemical which occurs naturally in fossil fuels and is removed through refining processes. The sulfur recovery unit (SRU) of a refinery converts the H2S to elemental sulfur which can be stored or sold off. A critical point in this process is the furnace, which combusts H2S in order to sustain a 2:1 stoichiometric ratio of H2S:SO2 in the subsequent catalytic reaction. ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The 4650-PM is currently available only in the USA and ...
-
Manufactured by SKCbased in USA
Reliability and simplicity make the SKC Sidekick a good entry level pump, whilst high build quality means it won't let you down. Available in three models including two ATEX approved models. All models offer a wide flow range of 5-3000 ml/min, which means the Sidekick is suitable for dust and gas sampling projects. The lower flows are achieved with the constant pressure controller and low flow ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
Simple Solutions Distributing, drawing on its 17+ years in business designing and building molecular scrubbers for the wastewater industry brings you our industrial strength activated carbon recycling molecular scrubber, the ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
The RMS-250 has a small footprint of just 19” x 19” and can be customized for your ...
-
Manufactured by Global Pump - a Mersino Companybased in USA
Global Pump Standard Centrifugal Wellpoint pumps are specifically designed to effectively handle the arduous requirements of wellpoint and underdrain dewatering systems where intermittent water flow and large amounts of air are encountered. Global Pump Standard Centrifugal Wellpoint pumps provide a compact, dependable, highly efficient solution in a completely automatic priming pump with built in ...
-
Distributed by Edwards Limitedbased in GERMANY
The nXDS6i is the next generation in completely oil free, dry scroll pumps and replaces the XDS5. nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip ...
-
Manufactured by SPECK Pumpen Verkaufsgesellschaft GmbHbased in GERMANY
These self-priming, gas handling side channel pumps also handle liquids not containing solid matter and can be used for hot water applications or applications with great suction heights, for example boiler feed pumps or condenser ...
-
Manufactured by MOGAS Industries, Inc.based in USA
The internal control elements (or trim) use flow paths of various configurations to control flow and pressure drop. This compact trim configuration, located downstream of the seat, consists of a diffusion element and a control ...
-
Manufactured by MOGAS Industries, Inc.based in USA
The MOGAS T-Series trunnion-mounted ball valve is available in either metal-seated and soft-seated from 3 to 60 inch, and two- or three-piece designs, with operating temperature from -50° F to 400° F (-45 to 204° C). The valve retains many of the time-tested features of the C-Series, such as an actuator mounting pad, but with a trunnion design. Its reduced operating torque results in ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Highly robust gas specialist for fluctuating conditions with compact, easily accessible transmitter. For a wide range of gas applications Prosonic Flow G provides reliable flow measurement, even with wet gas and changing gas properties and compositions. A pressure-rated sensor housing with rupture disc limits safety risks. The compact transmitter offers high flexibility in terms of operation and ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
Turner Designs Hydrocarbon Instruments is proud to introduce the new standard in grab sample oil in water analysis with the TD-550 oil in water analyzer. The TD-550 is suitable for crude oils and other heavy oils with a greatly enhanced detection range (low ppb to 5000 ppm) over most oil in water analyzers. Also new, the TD-560 includes the same optical channel of the TD-550 along with a second ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Highly robust gas specialist for fluctuating process conditions as remote version with up to 4 I/Os. For a wide range of gas applications Prosonic Flow G provides reliable flow measurement, even with wet gas and changing gas properties and compositions. A pressure-rated sensor housing with rupture disc limits safety risks. The innovative remote transmitter maximizes installation flexibility and ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Colorimetric system for the monitoring of boiler feedwater, steam, condensate and ion exchangers. Liquiline System CA80SI provides precise online analysis of silica and helps protect plant equipment from glass-like deposits ensuring optimum performance of turbines and ion exchangers. Its unique combination of peristaltic and high-precision dispenser pumps enables extremely reliable operation and ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Potentiometric system for the monitoring of boiler feedwater, steam, condensate and ion exchangers. Protect your water steam cycles and ion exchangers with the CA76NA sodium analyzer! An increase in sodium levels in high-purity or boiler feedwater indicates the presence of unwanted dissolved impurities. This can cause serious damage and consequently expensive repairs. CA76NA provides highly ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
Turner Designs Hydrocarbon Instruments proudly announces the all new dual-channel TD-560 Oil in Water Analyzer. In addition to the optical channel found in the TD-550, suitable for crude and other heavy oils, the TD-560 adds a second channel for detecting lighter hydrocarbons, such as BTEX, gas condensates, gasoline, jet fuel, kerosene, transformer oils, styrene and phenol. The TD-560 offers a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you