Condensate Equipment For Water And Wastewater Available In Alberta
-
ShowcaseManufactured by Testo, Inc.based in USA
Measurement accuracy, configurable measurement display, parallel measurement options, intuitive operation, sturdy housing, connection option to the testo Smart App: Our flue gas analyzer testo 310 II offers everything that heating fitters and technicians need for practical work on heating ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 310 II has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. In addition, the measuring ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The exhaust gas analyzer IMR 1440FL is designed to measure exhaust gases on Forklift Trucks, Generators, Cars, and heavy Machinery that are powered by Diesel or Gas Engines. According to regulations it can measure soot on diesel engines and Carbon Monoxide CO on gas powered forklift trucks. Some worldwide regulations require Nitric Oxides NOx, therefore this analyzer can be equipped with a NOx ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Key Features and Applications: True Continuous Level. Continuous Level + Point Level Hybrid (CL86 Plus). Up to 55 ′ [16,7 m] Length. Wet or Dry Detection. Custom Flex Joint Design Solves. Installation Challenges. VeriCal In-situ Calibration Verification ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Set new standards for digestion speed, flexible use and result reproducibility with the IR SpeedDigester. Achieve higher sample throughput for nitrogen determination by Kjeldahl digestion and multiply functionality with this entry level IR ...
-
Manufactured by DAS Environmental Expert GmbHbased in GERMANY
The electrostatic condensate separator JUNIPER reliably and cost-effectively removes condensable organic compounds (VOC´s) like those that accrue in manufacturing fabs in the photovoltaic industry. Many of these organic compounds have a bad odor and many of them are toxic. JUNIPER is capable of handling waste gas flows up to 1000 m3/h. Separation rates are above up to 95 %. The system ...
-
Manufactured by Transvac Systems Ltdbased in UNITED KINGDOM
We supply Ejectors for use on Vapour Recovery Units (VRUs), also known as Vent Gas Recovery Units. Our ejectors use Liquid Jet Pump or Gas Ejector Technology to compress vent gas for recovery. This gas is either pumped back into the storage tanks that emitted the vapour, or off into pipework for sale and distribution. Our Ejectors function by use of a high-pressure motive fluid (usually water). ...
-
Manufactured by Nalco Pretreatment Solutions (PTS) - an Ecolab companybased in USA
Sodium cycle polishers treat condensates from industrial boilers to achieve soft water and reduction of iron oxides (crud). Our polishers use macroporous cation exchange resin because it can withstand high temperatures and oxidative properties while removing hardness and crud from the ...
-
Manufactured by JORC Industrial BVbased in NETHERLANDS
The SEPREMIUM range of oil/water separators separates oil from condensate, generated by compressed air systems. The SEPREMIUM achieves efficient separation of oil from condensate by means of directing the condensate through various separation stages. As condensate flows in to the SEPREMIUM, the oil is filtered out through various filtration elements. The oil adsorbing elements combine various ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Condensate pots are used in steam applications to achieve a constant condensate level within the pressure taps. If there are any fluctuations which lead to a change in condensate levels the condensate pots help to either reduce the level by backflow of excess liquids or increase the level by additional condensation of ...
-
Manufactured by Yamato Scientific America Inc.based in USA
High performance, fully automatic sterilization from start to finish with high pressure steam sterilization and drying ...
-
Manufactured by TCR-Tecorabased in ITALY
Condensing and adsorbing device MCS2 for the determination of PCDD/PCDF in compliance to EN 1948 Method. The EN 1948-1 “Filter condenser” method foresee the isokinetic sampling with a heated probe, filterholder and adsorbing trap XAD2/PUF after the ...
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
PSA has further developed this as a specific accessory for the PSA 10.525 Sir Galahad instrument; the PSA 10.515 Pre-concentration System. This system vaporises the condensate sample into an argon stream over a heated Amasil® trap. The mercury and mercury compounds are retained in the trap and the hydrocarbons vented to waste. The mercury levels are quantified by transferring them via a clean ...
-
Manufactured by Wenzhou Ace Machinery Co., Ltdbased in CHINA
A seven-effect falling film evaporator is the best choice for an industrial application that requires the evaporation of a large volume of liquid. This type of evaporator can evaporate a more significant amount of liquid than a single-effect evaporator, and it does so with less energy consumption. In addition, a seven-effect evaporator can operate at a higher temperature than a single-effect ...
-
Manufactured by Omega Air d.o.o.based in SLOVENIA
Electronic condensate drains EMD series is designed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The units can be installed as external drain on any application specified. Condensate accumulates in the collecting reservoir. When the level is high enough condensate is being discharged from the system without any air losses. Fluid level ...
-
Manufactured by Airtech Incorporatedbased in USA
Airtech liquid ring vacuum pumps and liquid ring compressors are rotating, non-pulsating, positive displacement pumps. Liquid ring vacuum pumps, also known as water ring vacuum pumps, contain a single moving part, the rotor. The rotor is located eccentrically within a cylindrical casing. Liquid is supplied to the pump and by centrifugal force, forms a liquid ring around the casing which results ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
BERKEFELD PurBev RO reverse osmosis plants are engineered according to hygienic design standards and meet the highest performance requirements of our customers in the food and beverage industry. ...
-
Manufactured by Bithermbased in SPAIN
Bi-Thermostatic bimetallic steam trap, with corrosion resistant regulator unaffected by waterhammer and superheated steam. Balanced pressure valve. Independent seat and shutter, and external adjustment device while running for temperature and flow discharge. Strainer type "Y". The fact that both, valve and seat, be independent and located in the low flow discharge area, reduces erosion and ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97100E Electric Drip Trap provides for the continuous, safe removal of condensate from low points in low pressure gas piping systems. Available in either 3 or 6 quart sizes and with 1" NPT inlets and outlets, the Shand & Jurs Biogas 97100E adapts to any condensation or drainage collection requirement. The 97100E can be mounted in Class 1, Division 1 & 2, Gas ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The ACC cooler offers precision, safety and long-term stability for extractive analytics. The very low gas dissolution rate is attained owing to the new cooler technology (Patents applied). Both the permanent separation of the condensate from the gas phase, as well as the shorter contact time of the gas in the system, plays important roles in reducing gas dissolution ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you