Condensate Equipment For Water And Wastewater Available In Newfoundland
-
ShowcaseManufactured by Testo, Inc.based in USA
Measurement accuracy, configurable measurement display, parallel measurement options, intuitive operation, sturdy housing, connection option to the testo Smart App: Our flue gas analyzer testo 310 II offers everything that heating fitters and technicians need for practical work on heating ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The exhaust gas analyzer IMR 1440FL is designed to measure exhaust gases on Forklift Trucks, Generators, Cars, and heavy Machinery that are powered by Diesel or Gas Engines. According to regulations it can measure soot on diesel engines and Carbon Monoxide CO on gas powered forklift trucks. Some worldwide regulations require Nitric Oxides NOx, therefore this analyzer can be equipped with a NOx ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 310 II has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. In addition, the measuring ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Set new standards for digestion speed, flexible use and result reproducibility with the IR SpeedDigester. Achieve higher sample throughput for nitrogen determination by Kjeldahl digestion and multiply functionality with this entry level IR ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Key Features and Applications: True Continuous Level. Continuous Level + Point Level Hybrid (CL86 Plus). Up to 55 ′ [16,7 m] Length. Wet or Dry Detection. Custom Flex Joint Design Solves. Installation Challenges. VeriCal In-situ Calibration Verification ...
-
Manufactured by Wenzhou Ace Machinery Co., Ltdbased in CHINA
A seven-effect falling film evaporator is the best choice for an industrial application that requires the evaporation of a large volume of liquid. This type of evaporator can evaporate a more significant amount of liquid than a single-effect evaporator, and it does so with less energy consumption. In addition, a seven-effect evaporator can operate at a higher temperature than a single-effect ...
-
Manufactured by Körting Hannover AGbased in GERMANY
Gas entering the droplet separator is set in rotation by a specially formed twist generator which causes droplets to be propelled outwards as a result of the centrifugal action. The separator chamber is shaped as a spiral tube. Droplets caught on the walls converge to form a liquid film which runs downwards towards the discharge point and not upwards in the direction of the gas flow. This special ...
-
Manufactured by Omega Air d.o.o.based in SLOVENIA
SFH condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free ...
-
Manufactured by DAS Environmental Expert GmbHbased in GERMANY
The electrostatic condensate separator JUNIPER reliably and cost-effectively removes condensable organic compounds (VOC´s) like those that accrue in manufacturing fabs in the photovoltaic industry. Many of these organic compounds have a bad odor and many of them are toxic. JUNIPER is capable of handling waste gas flows up to 1000 m3/h. Separation rates are above up to 95 %. The system ...
-
Manufactured by Nalco Pretreatment Solutions (PTS) - an Ecolab companybased in USA
Sodium cycle polishers treat condensates from industrial boilers to achieve soft water and reduction of iron oxides (crud). Our polishers use macroporous cation exchange resin because it can withstand high temperatures and oxidative properties while removing hardness and crud from the ...
-
Manufactured by Homogenising Systems Limitedbased in UNITED KINGDOM
Our Ultra High Pressure Homogenising systems offer unrivalled performance, with repeatable results, for continuous high shear fluid processing up to 1000 l/h for production applications including Particle size reduction, Nanoemulsions and Liposome preparation. The 085 "Hy-Drive" series of Homogenisation / Cell Disruption systems have been developed to meet the special requirements associated with ...
-
Manufactured by Transvac Systems Ltdbased in UNITED KINGDOM
We supply Ejectors for use on Vapour Recovery Units (VRUs), also known as Vent Gas Recovery Units. Our ejectors use Liquid Jet Pump or Gas Ejector Technology to compress vent gas for recovery. This gas is either pumped back into the storage tanks that emitted the vapour, or off into pipework for sale and distribution. Our Ejectors function by use of a high-pressure motive fluid (usually water). ...
-
Manufactured by JORC Industrial BVbased in NETHERLANDS
The SEPREMIUM range of oil/water separators separates oil from condensate, generated by compressed air systems. The SEPREMIUM achieves efficient separation of oil from condensate by means of directing the condensate through various separation stages. As condensate flows in to the SEPREMIUM, the oil is filtered out through various filtration elements. The oil adsorbing elements combine various ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Condensate pots are used in steam applications to achieve a constant condensate level within the pressure taps. If there are any fluctuations which lead to a change in condensate levels the condensate pots help to either reduce the level by backflow of excess liquids or increase the level by additional condensation of ...
-
Manufactured by Yamato Scientific America Inc.based in USA
High performance, fully automatic sterilization from start to finish with high pressure steam sterilization and drying ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: Extractive gas analysis. Emission and process monitoring. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by Pentair Filtration Solutions, LLCbased in USA
UltiSep technology was developed to address the inherent deficiencies of the conventional gas-liquid separators, making it possible to effectively remove liquid aerosols from gas streams. UltiSep flows from the inside-to-the-outside, reducing the gas velocity as the droplets are being removed. The media technology is specifically designed to provide the desired level of separation and has the ...
-
Manufactured by Aqualyng ICESbased in AUSTRALIA
We supply a wide range of cartridge filters manufactured by industry recognised tier one companies to suit most applications. Our filter range covers nominal, high performance and Absolute ratings in a wide range of micron ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
In power generation, high purity water forms an essential part of the steam cycle. This demineralised, or “ultra pure” water is necessary to minimise scale formation and corrosion within the boiler and turbine. Scale formation leads to reduced energy efficiency and increases maintenance costs. In large scale industrial processes, where considerable volumes of steam are consumed as ...
-
Manufactured by Ruland Engineering & Consulting GmbHbased in GERMANY
Maximum stability for product quality and taste; Gases in liquids, as oxygen, affect the taste, the colour and the stability and therefore the shelf life of the end products. Our vaccuum degassing units decrease the content of oxygen in the products, and thus reduce the oxidation of the relevant products. At the same time we preserve the precious aromas of the products. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you