Condensate Pot (Condensate) Equipment Available In Armenia
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Condensate pots are used in steam applications to achieve a constant condensate level within the pressure taps. If there are any fluctuations which lead to a change in condensate levels the condensate pots help to either reduce the level by backflow of excess liquids or increase the level by ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
Biogas is saturated with water vapour. In anaerobic digestion plants and their pipeline systems, there typically accumulating condensed water. Condensate can lead to blockages at low points, deposits, corrosion, etc. The EnvironTec's condensate pot / separator effectively drains, collects and removes condensed ...
-
Manufactured by Axis Solutions Pvt. Ltd.based in INDIA
The Reliable & long term operation of any Process Analyser depends upon the efficiency of the sample conditioning system for which dust, solid particulate & moisture free sample gas is essential. Where condensate removal from the sample is a major problem for analyses of gas, the Condensate Catch Port is the best ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Key Features and Applications: True Continuous Level. Continuous Level + Point Level Hybrid (CL86 Plus). Up to 55 ′ [16,7 m] Length. Wet or Dry Detection. Custom Flex Joint Design Solves. Installation Challenges. VeriCal In-situ Calibration Verification ...
-
Manufactured by Intra-Automation GmbHbased in GERMANY
of 8 mm (Fig.1). So it ´s guarantee, that condensate with a max drop diameter of 6,5 mm can flow back from the condensate pots into the flow sensor. So it can continuous a change of condition of aggregation from liquid to steam. (Prandl,L. "Führer durch ...
-
Manufactured by Intra-Automation GmbHbased in GERMANY
Itabar Steam Flow Sensors are designed to operate in environments with temperatures up to 650°C and 400 bar pressure. Various designs and materials can be selected to adapt customers ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Venturi tubes are DP flow elements used for flow measurement of aggressive and non-aggressive gases, steam and liquids. If low pressure losses at high flow values as well as short installation lengths are needed, this DP flow element is your best ...
-
Manufactured by Wyatt Engineeringbased in USA
Wyatt Engineering offers an array of accessories to complement our primary flow elements for a more complete flow and control solution. These options ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Orifice plates with taps are flow elements used for flow measurement of aggressive and non-aggressive gases, steam and liquids. In contrary to the normal orifice plates, they include a carrier ring where the pressure taps are located. This integral design allows these orifice plates to be mounted between standard pipe ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Meter runs combine a flow element with inlet and outlet piping and thus help in reducing disturbances in the flow measurement of aggressive and non-aggressive gases, steam and liquids. They are mostly used in small pipelines because the influence of disturbances on the measurement is significant with smaller ...
-
Manufactured by Intra-Automation GmbHbased in GERMANY
Itabar Liquid and Gas Flow Sensors are designed to operate in environments with temperatures up to 1175°C and 400 bar pressure. Various designs and materials can be selected to adapt customers ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Nozzles are used as DP flow elements for flow measurement of aggressive and non-aggressive gases, steam and liquids. The permanent pressure loss is lower in comparison to orifice plates. In contrast, the measuring uncertainty may be higher. Regarding these parameters, nozzles may be defined as an intermediate solution between orifice plates and venturi ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
Averaging pitot tubes are DP flow elements used for flow measurement of gases, liquids, and steam. In comparison to DP flow elements according to ISO 5167, they offer low pressure losses and flexible installation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you