Condensate Trap Equipment
-
Manufactured by AAT Abwasser- und Abfalltechnik GmbHbased in AUSTRIA
Highest possible protection by secured locking system. The AAT manual or electrical condensate trap can be used to drain all condensate from the gas system without gas outlet. In the basic setting the connection between the gas system and the condensate collector tank is open and the condensate is collected in ...
-
Manufactured by RIFOX - Hans Richter GmbH Spezialarmaturenbased in GERMANY
Housing Material: P250GH Nominal Diameter: DN15, DN20, DN25, DN40, DN50 Connections: Flanges DN15, DN20, DN25, DN40, DN50, according DIN EN 1092-1. Flanges V. 1'v. 2", according ANSI B 16.5. Class 150/300. Female thread G1/2", GVa", G1" (BSP) according DIN ISO 228-1. Female thread Vz", %", 1" NPT according ANSI B1.20.1. Butt weld DN15, 20,25, according DIN EN 12627 and ANSI B 16.25. Socket weld ...
-
Manufactured by Conveco Srlbased in ITALY
Condensate/sediment traps are designed to remove liquids and solids from biological gas, and are installed immediately downstream from each digester to remove the large volume of condensed water, and upstream from energy recovery plants. First-stage removal is accomplished by a combination of centrifugal force and a sharp drop in ...
-
Manufactured by Dado Lab SRLbased in ITALY
The FC5 condenser is built in accordance with the requirements defined in the EN1948 for the "Filter/condenser" method and to EPA23 with the dedicated option to invert the cartridge with the water flask. The trap is equipped with a glass support for the use of PUF or XAD2. The device is extremely compact, the adsorbing trap ...
-
Manufactured by Armstrong International Inc.based in USA
As steam distribution assemblies (MSD/SMSD), manifolds place all steam supply valves in one location. Standardizing components and centralizing their location simplify installation while reducing costs. You also save because routine maintenance is faster. Insulation can also be provided . . . and can bring major savings in most installations. The Steam Distribution Manifold places all steam ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 310 II has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. In addition, the measuring ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The exhaust gas analyzer IMR 1440FL is designed to measure exhaust gases on Forklift Trucks, Generators, Cars, and heavy Machinery that are powered by Diesel or Gas Engines. According to regulations it can measure soot on diesel engines and Carbon Monoxide CO on gas powered forklift trucks. Some worldwide regulations require Nitric Oxides NOx, therefore this analyzer can be equipped with a NOx ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Set new standards for digestion speed, flexible use and result reproducibility with the IR SpeedDigester. Achieve higher sample throughput for nitrogen determination by Kjeldahl digestion and multiply functionality with this entry level IR ...
-
PremiumManufactured by Testo, Inc.based in USA
Measurement accuracy, configurable measurement display, parallel measurement options, intuitive operation, sturdy housing, connection option to the testo Smart App: Our flue gas analyzer testo 310 II offers everything that heating fitters and technicians need for practical work on heating ...
-
Manufactured by AMESbased in SPAIN
applications, such as filtration (only small pore grades), pressure drop, mufflers, condensation traps and flow ...
-
based in INDIA
Protective bag with magnetic fixation. 4000 measurements recordable. Position-independent condensate trap. Illuminated graphic display. Fast-charging Ni-MH batteries. With the ecom-CN it is possible to make a quick check of combustion installations. Its special features are its low weight and simple operation. Many settings and working steps ...
-
Manufactured by Madur Polska Sp. z o.o.based in POLAND
Gas probe holder with an exchangeable probe pipe are a complete gas probe. It has a gas-electric cable that connects the analyser with the probe pipe. Additionally it can be equipped with a condensate trap with gas filter. All probe holders have a standard M30x1 female connector to attach the probe ...
-
Manufactured by TCR-Tecorabased in ITALY
Condensing and adsorbing device MCS2 for the determination of PCDD/PCDF in compliance to EN 1948 Method. The EN 1948-1 “Filter condenser” method foresee the isokinetic sampling with a heated probe, filterholder and adsorbing trap XAD2/PUF after the ...
-
Manufactured by Kahn & Company, Inc.based in USA
The need for clean, pure, moisture-free compressed air and gas is critical. Moisture and contaminants are found in all compressed air and gas systems causing rust and corrosion in your pneumatic tools, contaminating process flows, clogging and damaging delicate pneumatic instrumentation. When freezing temperatures are encountered, ...
-
Manufactured by ecom GmbHbased in GERMANY
tubing. T-Room probe. Charger. Condensate trap with moisture-absorbing pad and optical monitoring. Internal memory. Calibration Certificate - generated after 100% sensor calibration in climatic chamber. Free PC ...
-
Manufactured by TCR-Tecorabased in ITALY
Condensing and Adsorbing Device EPAMCS2 for the Determination of PCDD/PCDF in Compliance to EPA 23 and EN 1948 Method. The EPA 23 and EN 1948-1 methods foresee the isokinetic sampling line with a heated probe, filterholder and XAD2 adsorbing trap for both gas and ...
-
Manufactured by Kahn & Company, Inc.based in USA
, condensation trapped in air systems will freeze, causing catastrophic failure in pneumatic lines. External heater, purge-free, blower type dryers, reflect the state-of-the-art in compressed air drying — and Kahn is the leader. With 8 standard models to handle flows from 200 SCFM to beyond 4500 SCFM, Kahn offers the best choices in compressed air and ...
-
Manufactured by Conveco Srlbased in ITALY
Gravel filters are in-line devices installed in biogas gas pipelines as condensate water traps and back-flame arresters. Filling material is usually coarse gravel with granular size between 30 and 60 mm. An external water trap device allows for continuous disposal of condensate water. PROGECO gravel filters can be fitted with ...
-
Manufactured by Siloxa AGbased in GERMANY
The GCKV concept is very simple: consistent bundling of all key functional units that are needed to reliably supply the gas motors (e.g. satellites) with the biogas produced. Or to put it another way, the GCKV container houses all components such as the gas cooler, condensate trap, liquid coolant circuit, water cooler and ...
-
Manufactured by Conveco Srlbased in ITALY
FGP gravel filters are installed to remove coarse particles from biogas. They also work as in-line condensate water traps and as additional safety devices preventing backflames in gas mains. The unit consists of a stainless steel vessel with removable lid and flanged connections to process. The filling material is coarse gravel placed by ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you