Condensate Services For Water And Wastewater Near Pakistan
-
by Eco Energiesbased in INDIA
Study of steam distribution system. Performance assessment of steam traps. Evaluation of steam leakages. Evaluation of condensate recovery. Evaluation of demand side management with supply. Proper utilization of directly injected steam. Minimizing heat transfer ...
-
Manufactured by NIRTECH Pvt. Ltd.based in INDIA
Water is a scarce resource & is being used daily in Millions of litres for Domestic & Industrial Purposes. The effluent generated is discharged into Environment after treatment thereby not only wasting this precious natural resource but also damages the eco-system as whole. The effects of such effluents discharge without complete treatment pollutes the surface water, ground water, rivers, ...
-
Manufactured by Wex Technologies Pvt. Ltd.based in INDIA
Boilers are prone to scale formation and corrosion if the feed water is not properly conditioned or ...
-
based in UNITED ARAB EMIRATES
As one of most common technology ion exchange and softening and required widely in several water treatment and wastewater water treatment application as reliable solutions. We do provide full design services covering the all stages of the project starting from technical proposal, technical specifications, design calculation, modelling, detailed engineering, fabrication and workshop drawings, ...
-
Manufactured by Fluence Corporationbased in USA
Fluence has decades of experience delivering ultrapure water solutions for power generation and other industrial clients. Fluence provides standardized and customized ultrapure water (UPW) systems using industry-proven membrane-based technologies, including ultrafiltration (UF), reverse osmosis (RO), gas transfer membrane (GTM) degasification, and continuous electrodeionization (CEDI). These ...
-
Manufactured by Newterra, Ltd.based in CANADA
Parts for newterra Brands & Other Makes: Inlet distributors, Underdrains, Pressure & flow switches, Controls/control upgrades, Eductors, Chemical pumps, pH meters/analyzers, Neutralization skids & replacement tanks for softeners, dealkalizers, demineralizers & condensate ...
-
Manufactured by Jurby WaterTech International UK Ltd.based in UNITED KINGDOM
The most prevalent problems encountered in the use of boilers are scale deposition and corrosion. Chemical feed water treatment is needed to keep the boiler running efficiently because untreated water will inevitably lead to overheating, pressure drops, tube failures, and loss of efficiency. Jurby WaterTech International produces and supplies JurbySoft® oxygen scavengers, scale and corrosion ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
In power plants and chemical production facilities a constant and reliable supply with water in the required qualities is particularly crucial. Berkefeld offers technology solutions for: Cooling tower make-up water treatment, Process water treatment, Boiler feed water treatment, Condensate polishing, Waste water treatment (e.g. from flue-gas ...
-
Manufactured by United Heat & Power Pte Ltdbased in SINGAPORE
Together with our sister company Technical America Inc. UHP designs and builds gas treatment packages in compliance with API and customer specifications and accommodates form large to small capacities. Highly developed designs including modular equipment. ...
-
based in GERMANY
The LFKW supports municipalities, businesses and engineer firms with further services: from the establishment of tailor-made laboratory facilities and the rental of pumps, samplers and measurement equipment; to the rental of a complete pilot plant for wastewater, sludge, and air treatment including transportation, installation and ...
-
by Unidro SpAbased in ITALY
Our experience in the water treatment and utilities combined with the wide range of technologies and equipment available in-house, give us a full coverage of the different needs connected to condensate treatment and recovery. ...
-
by Siirtec Nigibased in ITALY
Gas-liquid separation is a basic step of each oil & gas process unit with the important purpose of segregating liquid and gas streams for further processing or recovery or for protecting the process media and equipment treating the process gas. ...
-
by IDRECO S.p.Abased in ITALY
The treatment of water for industrial and municipal uses is one of the main concerns in our society, considering that technological processes as well as the life on the entire planet dependent on the quality of this resource.The IDRECO Group invests heavily in research and development facilities and activities, forever seeking out new technologies. We offer the most up-to-date technologies to ...
-
Manufactured by LION Group, Inc.based in USA
Soiled gear can pose a health risk to firefighters. Smoke deposits and condensed residue can become trapped in fibers and remain there until cleaned, leaving you at risk to secondary exposure to cancer-causing chemicals and gear that may not provide you with protection when you need it most. Detecting damage on your gear early via regular inspections can help prevent ongoing degradation, as well ...
-
based in UNITED KINGDOM
The Hampden Consultancy in conjunction with other associated specialists, is able to offer expertise in connection with the following work elements and specialisms relevant to mechanical & electrical engineering services. ...
-
Manufactured by Enersol Flomar Ltd.based in UNITED KINGDOM
Our experience in the design of steam raising, hot water raising, distribution, point of use and condensate / heat recovery solutions –enables us to offer our clients a truly comprehensive service. This service includes the following but is bespoke as per the client’s ...
-
based in IRELAND
Surface emissions surveying Landfill surface emissions surveys with our new ODOURHOG with integrated GPS system. This allows us to scan the landfill cap continuously and create surface emissions contour maps using special software. This can be used by the landfill manager to assess the existing emissions of landfill gas from the cap, identify problem area requiring further remediation and ...
-
Manufactured by Spirax Sarco Inc.based in USA
Discover how to keep your steam supply in tip-top condition with our Steam Quality Testing service. Eliminating wet or dirty steam can cut your energy costs, improve productivity and product quality, as well as reduce maintenance workload. The scope of the service, which assists our customers with compliance to requirements of EN285, HTM 2010, CFPP & food ...
-
Manufactured by Groth Corporationbased in USA
Flame Control Laboratory and Flow Laboratory at their Stafford, Texas manufacturing facility. The Groth Flow Lab is one of the most modern low pressure, high volume flow labs in the United States. It meets ASME PTC-25 requirements and is TUV certified. The flow lab has a maximum flow rate of 600,000 standard cubic feet per hour and can generate a maximum pressure of 5 pounds per square inch and ...
-
based in USA
PROCESS uses long-term or short-term licensed commercial process simulation software (CHEMCAD, Aspen, HYSYS, Pro/II, Simsci) and/or in-house simulation programs to perform: Detailed mass and energy balances. Unit operation design/evaluation. Piping system hydraulics calculations. Relief and flare system design/evaluation. Heat exchanger ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you