Only show results in Texas? Ok

Conductivity Meters Applications

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Deionized water testing industry

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water treatment For Hemodialysis industry

    Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Boilers and cooling towers

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Pool Water Testing / Spa Water Testing

    Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for for Environmental industry

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Fountain solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Bromate analysis for the drinking water industry

    Bromate forms during the ozonization of drinking water. Several international standards stipulate detection limits and test methods. Conductivity detection with chemical suppression allows the determination of bromate in the lower μg/L range. In the ng/L range, bromate can be detected by IC/MS coupling or post-column derivatization with potassium iodide and subsequent UV detection.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    ADVANCEES - Ultrapure Water Application - Custom skid-mounted water purification equipments

    Ultrapure water (UPW) is water that has been purified to very strict specifications, containing by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,055 uS/cm at 25oC, also expressed as resistivity of 18,2 MOhm. Ultra-pure water is mainly used in the semiconductor and pharmaceutical industry often is produced through processes like membrane filtration or ion exchange to reach the ultimate conductivity of 10 uS/cm. The demineralized water is then processed...

    By Advanced Equipment and Services based in Coconut Creek, FLORIDA (USA).

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Surface water and water conservancy monitoring solution

    Surface water and water conservancy monitoring is an important foundation work for reasonable utilization and protection of the nation water and soil resources, is a foundation of science management and protection of water ecology, water resources, water safety. The purpose of water quality monitoring is timely, accurate and comprehensive reflection of water environment quality present situation and developing trend, providing scientific basis for water environment monitoring, management, planning, pollution...

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Water monitoring technology for oil & gas

    Monitoring natural water bodies surrounding oil and gas drilling activities like hydraulic fracturing is a key issue in environmental monitoring and regulatory compliance.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for mining

    Ensuring that pollutants from mining activities do not enter surrounding natural water bodies is a key issue in environmental monitoring and regulatory compliance.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Machine condition monitoring for industrial manufacturing

    Machine condition monitoring using oil analysis is a predictive maintenance solution for industrial environments. An oil analysis program allows for reduction in unexpected failures and costly downtime for manufacturing components such as gears, pumps, compressors, engines, bearings, hydraulic systems, and other machinery.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Ultra pure water treatment

    Ultra pure water is mainly used in the semi conductor and pharmaceutical industry. Because of the continuing miniaturilisation in the semi conductor industry, the specifications become more strict every year. Ultra-pure water contains by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,054 uS/cm at 25oC, also expressed as resistivity of 18,3 MOhm.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you