Cooling Tower Monitoring Equipment For Water And Wastewater In Italy
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
S.sensing MX is a new, modular analyzer system especially designed for industrial cooling water applications. The modular system contains different types of sensors and analyzers connected to one central cooling tower controller. This allows fitting S.sensing MX to practically any ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Microbiology, biofilm, Legionella, Pseudomonas are sources for several problems in water systems and therefore of main concern in the industry. A system not properly controlled can lead to high economic losses and have a direct impact on the health of the ...
-
Manufactured by Baltimore Aircoil Companybased in USA
Since 1978, thousands globally installed, proving the VXI coolers reliability. Fans, motor and drive system (V-belt) are located in the dry air, preventing moisture and condensation. No external moving parts, helping it withstand the toughest weather. Various corrosion-resistant materials, including the unique Baltibond hybrid coating for guaranteed long service life. Optional extended surface ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Graduated measuring ranges 0.01 µS/cm – 2,000 mS/cm. Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be ...
-
Manufactured by MITA S.r.l.based in ITALY
HBR series is suggested in plants in which the quality of the fluid to be cooled is a basic requisite (no contact with air is allowed) and where the focus is oriented on energy and water savings. All models are totally pre-assembled in our ...
-
Manufactured by MITA S.r.l.based in ITALY
The closed circuit cooler (MCC series) is suggested in plants in which the quality of the fluid to be cooled is a basic requisite (no contact with air is allowed). All models are totally pre-assembled in our ...
-
Manufactured by Evapco Inc.based in USA
Crafted from decades of engineering know-how, the LPT cooling tower series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating advantages in any climate. From performance to maintenance, they simply work smarter. The LPT sets the standard in low-profile, low-sound, centrifugal fan, forced-draft cooling towers, especially suited for ...
-
Manufactured by Baltimore Aircoil Companybased in USA
Since 1978, thousands globally installed, proving the VT0/1-previously called VXT- cooling tower reliability. Fans, motor and drive system (V-belt) are located in the dry air, preventing moisture and condensation. No external moving parts, helping it withstand the toughest weather. The thermal performance of VT0/1 cooling towers is tested and certified by Eurovent. Various corrosion-resistant ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
With electronic dp we are offering an absolute superior solution with outstanding values to measure the level in pressurized and vacuum tanks. Deltabar FMD71/FMD72 help you to getting rid of problems resulting from traditional mechanical differential pressure measurement using impulse lines or oil-filled capillaries. With electronic dp safety risks are minimized and the total cost of ownership ...
-
Manufactured by Evapco Inc.based in USA
The eco-PMC’s Ellipti-Fin Cooling Coil now features CrossCool Internal Tube Enhancement which increases the internal heat transfer coefficient of the coil and thus increases the cooling capacity of the unit. The eco-PMC offers the same features and benefits of the PMC line of evaporative condensers but utilizes EVAPCO's patented ellipti-fin coil technology to offer water savings benefits ...
-
Manufactured by Evapco Inc.based in USA
Crafted from decades of engineering know-how, the LSTE cooling tower series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating advantages in any climate. From performance to maintenance, they simply work smarter. The standard in low-profile, low-sound, centrifugal fan, forced-draft cooling towers, these units are especially suited for ...
-
Manufactured by Evapco Inc.based in USA
The original Advanced Technology evaporative condenser provides an induced-draft, axial fan solution for a wide array of cooling applications. The ATC-E's Thermal-Pak II Coil features CrossCool Internal Tube Enhancement for increased internal heat transfer coefficient of the coil, and thus increases the cooling capacity of the unit. Induced draft counterflow condensers comprised of 181 models ...
-
Manufactured by ETG Risorse e Tecnologia S.r.l.based in ITALY
ETG 6500 SYN series of gas analyzers by ETG are the ideal solution for Syngas measurement applications because of their accuracy, stability, reliability, broad measurement range, and the variety of available form factors. Unlike other analyzers, ETG 6500 SYN non-dispersive infrared (NDIR) gas analyzers measure multiple gases in the instrument in special wavelenght regions, interferences free from ...
-
Manufactured by Evapco Inc.based in USA
Dramatically reduced water consumption: Thanks to EVAPCO’s cutting edge finned coil technology, the eco-Hybrid is the ultimate solution for both HVAC and large tonnage industrial process installations seeking the highest dry bulb switchover temperatures, reduced water usage, high peak-load output, and plume abatement. Available with a sophisticated SAGE control system and factory-mounted ...
-
Manufactured by Evapco Inc.based in USA
The eco-LSWE’s Ellipti-fin Cooling Coil features CrossCool Internal Tube Enhancement, increasing the internal heat transfer coefficient of the coil and thus the cooling capacity of the unit. The eco-LSWE utilize spirally finned elliptical tubes to increase both wet and dry capacity, and are the ideal solution for indoor applications, confined layouts, low sound requirements, and ...
-
Manufactured by Evapco Inc.based in USA
The LRWB’s Thermal-Pak II Coil now features CrossCool Internal Tube Enhancement, increasing the internal heat transfer coefficient of the coil and thus the cooling capacity of the unit. The LRWB offers the most models and box sizes in the industry and is designed with IBC Compliant Construction and CTI Certified Performance. ...
-
Manufactured by Evapco Inc.based in USA
The LSWE’s Thermal-Pak II Coil now features CrossCool Internal Tube Enhancement, increasing the internal heat transfer coefficient of the coil and thus the cooling capacity of the unit. The LSWE offers the most models and box sizes in the industry and is designed with IBC Compliant Construction and CTI Certified ...
-
Manufactured by Evapco Inc.based in USA
Thanks to EVAPCO’s cutting edge finned coil technology, the ATC-DC is the ultimate solution for food process and large tonnage industrial process installations seeking the highest dry bulb switchover temperatures, reduced water usage, high peak-load output, and plume abatement. The ultimate in wet/dry performance, every ATC-DC model has been engineered to provide a minimum 50% of the design ...
-
Manufactured by MITA S.r.l.based in ITALY
PMS series is a fiberglass cooling tower suggested in small size plants, all models K12 version are EUROVENT Certified. Capacity: from 18 to 860 kW. Directly coupled axial motor-fan group/s, low installed power, low noise levels. IP56 motors. Entirely corrosion–free casing, basin (with sloping base) and water distribution system (FRP, PVC, PP, PE) equipped with non-clogging PP spray ...
-
Manufactured by Vefim S.r.l.based in ITALY
The drop separators for vertical air flow (SG Series) allow to separate two fluids in a gas stream. The most frequent event is to separate water drops in an air flow. These drop separator panels offer the best performance to date available on the market, from both the point of view of separation efficiency and high mechanical strength. Also the PVC used is top quality and meets the CTI136 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you