Cooling Towers Equipment For Water And Wastewater Available In Washington
-
ShowcaseManufactured by ODLABbased in SOUTH KOREA
Used Graphite material instead of aluminum to prevent heavy metal pollution. Teflon-coating prevents corrosion due to harmful gas. Block type production maximizes digestion efficiency to reduce digestion time. Used high purity PFA Teflon acid sample digestion vessel. Compatible with pressure digestion vessel and general beaker. Tailored production possible for Graphite block. Applied 24 sample ...
-
ShowcaseManufactured by Excalibur Water Systems Inc.based in CANADA
The Excalibur Water Systems Industrial Clean-In-Place System facilitates the cleaning and restoration of reverse osmosis membranes by purging the foulants that develop during regular equipment operation. This operation restores a degree of a membrane’s performance while eliminating the need to manually remove the membranes to clean or replace them. CIP models can manage varying degrees of ...
-
ShowcaseManufactured by Chemtronics Technologies (India) Pvt. Ltd.based in INDIA
Chemozone heavy commercial & industrial Ozone generator is very widely & effectively used in many industrial applications for water & waste water treatment. This range of ozone generators are used in tertiary treatment of sewage & effluent treatment. CHEMOZONETM Ozone generators are specifically designed for swimming pool and cooling tower water treatment. OG/HC & OG/HI series ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Excalibur Water Systems’ Simplex Cooling Tower Side Stream Filters are designed for applications with a steady demand capacity of filtered water during a specific period. Regeneration, during which time no filtered water supply to the cooling tower is available, is then programmed to occur at a pre-set time. For this reason, Simplex Cooling Tower Sidestream Filters are typically sized to ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
In the manufacturing process we developed the foils are reinforced at the outer edges and in the middle and are therefore very stable. This makes our film fill media extraordinarily resistant to erosion. Our unique welding method connects the single foils with up to 20.000 welding points per m3. This high number of connections results in robust packings with high mechanical load capacity. Bearing ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
2H PLASdek and CLEANdek vertical flow fills are designed for the use in counterflow cooling towers with poor water quality. With different types in PP, PVC and PPHT and different material thickness, our fills cover all customer requirements. Fill media in flame retardant or anti-bacterial types are available on request. 8earing capacity and weight/m1 depend on sheet thickness. It will be selected ...
-
PremiumManufactured by Myron L Companybased in USA
Myron L<sup>®</sup> Company’s new 900 Series Multi-Parameter Monitor / Controllers combine Accuracy, Reliability, Simplicity, and Flexibility. The user intuitive GUI (Graphical User Interface) allows easy and complete programmability of the instrument all from the LCD touch screen. These highly accurate instruments have the ability for simultaneous monitoring and controlling ...
-
PremiumManufactured by Myron L Companybased in USA
This portable water analysis instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include the ability to select from 3 different solution types that model the characteristics of the most commonly encountered types of water; proprietary temperature compensation and TDS conversion algorithms; highly stable ...
-
PremiumManufactured by Myron L Companybased in USA
Obtain reliable and accurate measurements of your water source with the value-priced TechPro II. Ideal for water treatment testing as well as other industrial and commercial applications, these instruments reflect. Myron L’s 40-plus years experience designing and building quality conductivity, TDS and pH measuring ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Our cellular inlet louvres improve the air flow into the cooling tower. They not only hold back unwanted elements (e.g. leaves) but also prevent water splash-out which can cause icing and loss of expensive water and treatment chemicals. Moreover, an inlet louvre restricts the amount of sunlight entering the cooling tower thereby impeding algae growth. Also the tower‘s clean appearance is ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Capacity:312L. Cooling method: Forced Air Cooling System. Defrost: Auto. Refrigerant: R290. Sensor Type: NTC. Temperature controller: ...
-
PremiumManufactured by Finn Corporationbased in USA
The FINN T60 is the perfect 600 gallon HydroSeeder for the landscaper or contractor that requires a fast and economical solution for seeding jobs. With coverage up to 7200 square feet per load you don’t have to settle for less than proven and reliable FINN quality to tackle a wide range of demanding hydroseeding ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Sulfurs / Mercaptans / odor analyzer: MEDOR Exp Chromatotec has engineered and manufactured the new Exp Medor designed to operate in hazardous area environment such as Class I, Division 2, group C&D and ATEX zone I and ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita in his continuous commitment for sustainable treatments has developed Corrsave 100, an Innovative new molecule that provides corrosion inhibition & hardness stabilization for water systems with special focus on treatments where low P (Phosphorous) and biodegradability is a ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Reverse Osmosis (RO) is a widely utilized technology for dissolved solids (TDS) removal. In these applications based on the pretreatment used, RO water recoveries can be between 75-80% with salt rejection rates between 97-99%. The most critical issue in treating industrial process water using GWT Reverse Osmosis technology is pretreatment. The process water source chemistry will determine the ...
-
PremiumManufactured by Weda ABbased in SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Geothermal is a strong candidate to make green energy transition from fossil-based resources to renewables. To provide non-stop 7/24 sustainable energy generation in terms of heat and power, Kurita has a full product range to protect geothermal systems from scaling and ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
S.sensing MX is a new, modular analyzer system especially designed for industrial cooling water applications. The modular system contains different types of sensors and analyzers connected to one central cooling tower controller. This allows fitting S.sensing MX to practically any ...
-
PremiumManufactured by Myron L Companybased in USA
ULTRAPENx2 PTBT2 Benefits: Reliable repeatable results, affordable, rugged design, reduce waste, accurate, easy to use, ensure product quality, protect the ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
In all different types of cooling towers drift eliminators are used to reduce the loss of water and emissions. Above the water distribution and the cooling fills, a layer of drift eliminators is installed for this purpose. It catches the water drops which are carried away with the air flow and redirects them into the cooling water ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you