Water Technology (Cooling Water) Equipment
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Reduction Of Risk Of Legionella Pneumophila In Open Cooling Circuits; Time and again news report about outbreaks of legionella disease in areas near cooling towers. Careful water treatment, together with regular maintenance reduces the risk of bacteria growth in the cooling circuit. But one step more leads to an even higher ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
In all different types of cooling towers drift eliminators are used to reduce the loss of water and emissions. Above the water distribution and the cooling fills, a layer of drift eliminators is installed for this purpose. It catches the water drops which are carried away with the air flow and redirects them into the cooling ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Modern re-cooling systems need to consider aspects of the environment and sustainability. For cooling towers this means it is important to reduce the loss of water and emissions. Therefore drift eliminators are used. They are installed above the water distribution and cooling fills and catch the water drops that are carried with the air ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
2H SANIPACKING fill media are made of a special antibacterial Polypropylene (PP) compound. The biocide impregnated compount disrupts the metabolic process of unwanted micro-organisms at the cell wall level, thus interrupting their ability to function, grow and reproduce on the 2H SANIPACKING Combined with regular maintenance and correct ...
-
Manufactured by Simran Canadabased in CANADA
Since 2010, our customers are enjoying phenomenal benefits of patented technology (developed by WCTI) for Zero Liquid Discharge cooling water treatment. This technology mitigates scale, corrosion and bio-fouling without blowdown or chemicals. “New Dimension” cooling technology permits operation at high TDS / Zero ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Optimal heat transfer properties – low pressure drop; Generally, every cross fluted fill could be cut to be installed in a cross-flow cooling tower. Such a fill, however, would not perfectly fit the requirements; we therefore developed a special range of fill for this type of tower (FX12.12 or KSN with a drift eliminator section KSA and air inlet louvre section ...
-
by Ecolab Inc.based in USA
Refining and petrochemical cooling water systems provide the most difficult challenges in the water treatment industry. High exchanger skin temperatures, low water velocities, degrading quality of make-up water streams and tightening environmental restrictions continue to increase the stress on these systems. Poor performance of ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita´s broad range of hardness stabilizers and dispersants for open cooling ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita´s broad range of scale and corrosion inhibitors for open cooling ...
-
Manufactured by LakesideWater & Building Services Limitedbased in UNITED KINGDOM
Lakeside can offer full commercial and industrial systems with ultra violet protection, alarms and tds monitors, low level protection and ultra pure water systems. We aim to survey, design and build to meet client specific needs and can supply standalone equipment or fully integrated plant with high quality products, Lakeside engineers ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Our 2H Splash and Trickle Fills have been specially designed for medium to strongly polluted cooling water, the focus of the development being on a high stability as well as on easy and economical installation. Therefore these fills are built from mechanically joint grids and are easily cleaned. The 2H NET 150 grid packings are ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Effective treatment programmes by determination of biofilm and scale deposits online with HydroBio Technology. Biofouling is an organic film composed of living (and dead) microorganisms embedded in a polymer matrix called EPS (=Extracellular Polymeric Substance). Biofouling is often present when the makeup water is surface or waste water. In ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
In the manufacturing process we developed the foils are reinforced at the outer edges and in the middle and are therefore very stable. This makes our film fill media extraordinarily resistant to erosion. Our unique welding method connects the single foils with up to 20.000 welding points per m3. This high number of connections results in robust packings with high mechanical load capacity. Bearing ...
-
Manufactured by Roxia Oybased in FINLAND
Roxia Plasma Oxidizer™ is an effective non-thermal plasma technology for industrial water purification. Plasma generated oxidants effectively remove colour, odour and organic residues while disinfecting the water. Roxia Plasma Oxidizer (RPO) is the superb water purification system alternative to ozone, UV and chemical ...
-
based in FINLAND
We have patented a self-cleaning water filtration technology that takes microfiltration to the next level. This new technology is commercialised through our new system, Sofi ...
-
Manufactured by ScaleBuster - Ion Enterprises Ltdbased in UNITED KINGDOM
The EnviroTower cooling tower water treatment solution optimizes energy and water efficiencies while minimizing environmental impacts. Cooling towers represent up to 30% of a building’s overall energy budget, and 50% of the water used. The EnviroTower solution helps commercial, institutional and industrial facilities significantly ...
-
Manufactured by Sabien Technology Ltdbased in UNITED KINGDOM
M1G is a patented intelligent controller specifically designed for all standard Direct Fired Hot Water Heaters. M1G can be retro-fitted to individual Hot Water Heater and seamlessly integrates with existing controls and building management systems (BMS). M1G does not alter the temperature of the stored water and the set point of the ...
-
Manufactured by Universal Flow Monitors, Inc.based in USA
A DeltaPoint Lite (DPL) or DeltaPoint Manifold (DPM) paired with the WET Venturi system when active water travels through a Venturi valve creating a vacuum on the weld lines. Excess water drains from the cooling lines preventing water explosion during cap change / maintenance. Utilization of the WET system not only prevents water ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Our 2H Splash and Trickle Fills have been specially designed for medium to strongly polluted cooling water, the focus of the development being on a high stability as well as on easy and economical installation. Therefore these fills are built from mechanically joint grids and are easily ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita´s broad range of corrosion inhibitors, hardness stabilizers and antifreeze for closed systems – Korrodex. Korrodex products are designed to provide optimal solutions to ensure protection against corrosion and scaling in closed systems. Our Korrodex product range includes innovative technologies to reduce operational ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you