Environmental Industry Equipment In New York
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in dirty water, measuring a TSS range of 0 – 10 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in reasonably clean water, measuring a TSS range of 0 – 2.5 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Landustrie Sneek BVbased in NETHERLANDS
The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: square or rectangular tanks, round tanks, shallow or deep ...
-
ShowcaseManufactured by Elvatech Ltd.based in UKRAINE
ElvaX Plus spectrometer is a desktop energy-dispersive X-ray fluorescence (EDXRF) analyzer with extended element range from Na (Z=11) to U (Z=92). The Helium purge system and the automatic primary filter changer combined with the large area SDD detector are used to allow effective registration of the light elements spectra. ElvaX Plus spectrometer is used for quantitative and qualitative analysis ...
-
PremiumManufactured by CETCObased in USA
QUIK-SOLID Booms are a higher performing alternative to traditional cellulose absorbent products that are utilized for hazardous, non hazardous and low level radioactive waste disposal. QUIK-SOLID superabsorbent media and a cellulose filler material are packaged in a closed nylon sock to ensure maximum polymer retention and absorbency. The sock can be cut to size and placed in drums, boxes ...
-
PremiumManufactured by CETCObased in USA
DPA is a dry penetrating agent that cleans casing, screens, gravel packs, and water-bearing formations of deposits consisting of mineral scale. DPA is a granular product and is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health ...
-
PremiumManufactured by CETCObased in USA
CETCO DEFOAMER is a non-ionic silicone solution designed to reduce surface tension and break foam bubbles over a wide variety of ...
-
PremiumManufactured by CETCObased in USA
The Global Standard for GCLs: Sodium bentonite-based GCLs provide an excellent hydraulic barrier in applications where leachate in direct contact with the GCL is relatively non-aggressive, or in composite lining applications where the GCL is overlain by a thermally welded geomembrane and hydrates from uptake of innocuous moisture from the subgrade. ...
-
PremiumManufactured by CETCObased in USA
SUPER PAC is an easy mixing, liquid polymer that enhances the properties of a bentonite drilling fluid. When added to HYDRAUL-EZ or SUPER GEL-X, SUPER PAC creates an ideal fluid for drilling in a variety of ...
-
PremiumManufactured by CETCObased in USA
A proprietary blend of granular cross-linked polyacrylate super-absorbent media and specialty modified minerals that rapidly absorbs and retains large volumes of aqueous solutions. LIQUISORB® 1000 is ideally suited for the stabilization and solidification of wastewaters and semi-solids containing petroleum based hydrocarbons and other high molecular weight organic ...
-
PremiumManufactured by CETCObased in USA
Super-dispersible sodium bentonite granules, agglomerated from a finely-ground, selectively-mined clay. Granular flocculant aid for use in industrial and municipal treatment plants. Used in conjunction with polymers or other flocculating agents to aid in the removal of heavy metals, oils and grease. When dispersed in a waste stream, ACCOFLOC® SDG attracts contaminants to help increase floc ...
-
PremiumManufactured by CETCObased in USA
QUIK-SOLID 50 is a custom blend of granular cross-linked polyacrylate super absorbent polymer and ORGANOCLAY. This high performing product rapidly absorbs and retains large volumes of aqueous solutions, while also offering a hydrophobic component to adsorb low soluble organic matter. The absorptive properties of QUIK-SOLID 50 are ideally suited for the solidification of wastewater, sediments and ...
-
PremiumManufactured by CETCObased in USA
C-GARD is a geocomposite (GCO) consisting of a layer of recycled rubber between two nonwoven geotextiles, which are needlepunched together. It's environmentally-friendly and ...
-
PremiumManufactured by CETCObased in USA
CETCO GRANULAR GROUT mixes into a smooth bentonite grout that has no lumps and pumps easily. CETCO GRANULAR GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilcosep was designed to remove moisture and particulate contamination from steam and gas turbine lube oils. Self-sufficient stand-alone models with reservoir capacity ranging from 2,000 gallons to 12,000+ gallons and portable models as well as custom designs are ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6500 and 6520 gas analyzers offer unparalleled accuracy and performance via simplified design and implementation. Unlike analyzers that require moving components, the 6500 and 6520 use pulsed-infrared sources to achieve high accuracy and reliability. Highly accurate calibration. High stability and rapid warm-up. Unique optical architecture. Comprehensive software ...
-
PremiumManufactured by CETCObased in USA
MARBLEMIX® screened limestone is specifically designed for the needs of the pool and spa plastering industry and is manufactured at our Lucerne Valley, CA facility from a deposit of white high quality calcite. MARBLEMIX® Natural and Ultra screened limestone have excellent chemical purity, expertly controlled color and particle sizing makes them ideally suited for the plastering of pools ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's M340 blackbody calibration source is a compact, high-resolution with high-temperature stability for sub-zero temperatures. Temperature range: Ambient -20 to 150°C. Manufactured and tested to meet rigid quality control standards. High resolution and high-temperature ...
-
PremiumManufactured by CETCObased in USA
REL-PAC Xtra-Low is a low viscosity, non-fermenting dry polymer designed for use as a more efficient filtration control additive in a variety of drilling fluid applications. Intended for use in bentonite and polymer ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO offers several designs and sizes of seal gas filters for the purposes of particulate and liquid removal. Each one of our units is designed to the requirements provided by the customer. With our many years of experience, we are able to determine the best option for the application whether it is an initial startup or an aftermarket retrofit. HILCO filters are available in simplex design and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you