Corrosion Monitoring services for Water and Wastewater near Pennsylvania

  • Services

    Klinkau has more than 30 years of experience in the filtration sector and has offerings that go far beyond the production and sale of filter elements. Klinkau provides all the support needed right from the planning phase. Following detailed process analysis, the filter elements required undergo geometric and constructive design and are correlated ...

    By Klinkau GmbH + Co Office in Exton, PENNSYLVANIA (USA).

  • Aerospace Testing Services

    In few industries is reliability more emphasized. The risk associated with the failure of key components is beyond measure.  Verifying raw materials, analyzing failures and thoroughly testing new products are critical to maintaining a strong safety record. As a Nadcap approved laboratory, IMR maintains a strict quality system with tight ...

    By IMR Test Labs based in Lansing, NEW YORK (USA).

  • Chemical Analysis Services

    Material composition is critical to a material's machinability, durability and stability in it's intended use.  As products have diversified, we've seen a surge of new alloys, coatings, polymers and emerging materials including fiber-reinforced composites and ceramics. Manufacturers are constantly developing new lighter, stronger and more ...

    By IMR Test Labs based in Lansing, NEW YORK (USA).

  • Oil & Gas Industry Testing Services

    Exploration, extraction, refining and transporting oil and gas products is vital to keeping our industrialized world running. The process for finding and extracting oil and getting it refined and to market consists of extensive infrastructure. In recent years we've seen that the cost of failure of parts and materials can be catastrophic not just ...

    By IMR Test Labs based in Lansing, NEW YORK (USA).

  • Corrosion Testing / Engineering Services

    Heath Consultants Incorporated offers a broad spectrum of corrosion testing and engineering services through our subsidiary company Norton Corrosion Limited (NCL). Norton is an industry leader in providing high-quality corrosion control products and engineering services. They maintain an experienced staff of Cathodic Protection Specialists, ...

    By Heath Consultants Incorporated Office in Greensburg, PENNSYLVANIA (USA). from Gas Services Service line

  • Corrosion Testing / Engineering Services

    Heath Consultants Incorporated offers a broad spectrum of corrosion testing and engineering services through our subsidiary company Norton Corrosion Limited (NCL). Norton is an industry leader in providing high-quality corrosion control products and engineering services. They maintain an experienced staff of Cathodic Protection Specialists, ...

    By Heath Consultants Incorporated Office in Greensburg, PENNSYLVANIA (USA). from Electric Services Service line

  • Legionella Testing and Evaluation

    The Environmental Health and Safety divisions of more and more facilities are requiring a proper testing program for Legionella testing and evaluation for their cooling tower systems. Since cooling towers are open systems to the environment, it is easy for bacteria to be pulled into the systems. Since the cooling water is usually warm, especially ...

    By JNB Laboratories based in Pennington, NEW JERSEY (USA). from Industrial Water Treatment Consulting Service line

  • Condition Assessments Services

     STOP preforming random test digs, STOP deploying leak detection technologies masquerading as condition assessment tools, STOP taking your lines out of service, STOP paying for expensive deployments of technologies that often get 'stuck' in the system and over promise and under deliver on the assessment of your assets.RCC has developed a ...

    By Russell Corrosion Consultants, Inc. (RCC) based in Columbia, MARYLAND (USA). from Corrosion Engineering Services Service line

  • Corrosion Surveys Services

    RCC has conducted thousands of corrosion surveys for clients around the globe. Our corrosion survey techniques include:

    By Russell Corrosion Consultants, Inc. (RCC) based in Columbia, MARYLAND (USA). from Corrosion Engineering Services Service line

  • Corrosion Control Services

    At Russell Corrosion Consultants, Inc. (RCC), our goal is to evaluate environmental conditions, draw independent conclusions based on the data, and design a world-class corrosion control solution that provides answers to our clients issues. By identifying potential corrosion risks up front, our engineers can provide recommendations to minimize ...

    By Russell Corrosion Consultants, Inc. (RCC) based in Columbia, MARYLAND (USA). from Corrosion Engineering Services Service line

  • Corrosion Monitoring Services

    Clients invest hundreds of thousands of dollars, even millions into the design and implementation of corrosion control design systems each and every year. However, without proper and routine corrosion monitoring it could all be for nothing. At Russell Corrosion Consultants we believe the most successful corrosion control projects entail a ...

    By Russell Corrosion Consultants, Inc. (RCC) based in Columbia, MARYLAND (USA). from Corrosion Engineering Services Service line

  • Tanknology Services in Support of Environmental Consultants

    At Tanknology, we provide compliance-related services at more tank facilities than any company in the world. We regularly partner with Environmental Engineering Consultants, bringing our tank site expertise and compliance services to a project in support of a consultant and their client. They key word is partner. We fully understand that you are ...

    By Tanknology Inc. Office in Mt. Laurel, NEW JERSEY (USA). from Specialty Services Service line

  • Four Phase Tank Assessment Services

    Tanknology’s Proprietary Alternative to Manned-Entry UST Inspections. Underground Storage Tank (UST) inspections performed via manned entry are risky and expensive. They are also frequently inaccurate. A better - and safer - solution is Tanknology's Four Phase Tank Assessment method. As the worldwide leader in UST compliance solutions, ...

    By Tanknology Inc. Office in Mt. Laurel, NEW JERSEY (USA).

  • Cathodic Protection Systems to Prevent Metal Corrosion

    The steel components of a UST system that are in unprotected contact with the soil have a strong likelihood of developing corrosion. Once that corrosion starts, metal will deteriorate – ultimately leading to fuel leaking from the system. Some of the largest leaks at UST sites have been directly attributed to corrosion. A comprehensive ...

    By Tanknology Inc. Office in Mt. Laurel, NEW JERSEY (USA). from Corrosion Protection Service line

  • Corrosion Testing Services

    ATI's Corrosion Laboratory offers a full range of corrosion testing services covering a wide variety of materials and corrosive media. Our core competency is the design of custom corrosion tests to simulate end-use conditions. Our qualified staff conducts corrosion research and provides corrosion technical training as well as specialized education ...

    By Allegheny Technologies Incorporated (ATI) based in Pittsburgh, PENNSYLVANIA (USA). from Laboratory Services Service line

  • SGS - Surface Coating Testing Services

    Surface coating testing from SGS – ensure your coating systems provide the performance you need.When selecting a coating system to protect steel or concrete surfaces, you need to ensure that it will perform well over time in any given environment. Making the wrong decision can mean coating failures with costs that far outweigh your initial ...

    By SGS North America Inc based in Rutherford, NEW JERSEY (USA). from Construction Service line

  • Analytical Services

    Curtiss-Wright Surface Technologies currently offers independent laboratory testing services through our IMR Test Labs subsidiary. Materials Testing aids in the raw material selection and validation processes during the design phase for a component. Analysis also facilitates the on-going quality assurance, process verification and finished goods ...

  • Coatings Inspection & Surface Analysis

    LEADCARE is pleased to offer coatings system and surface preparation analysis to our clients with structural steel and dense substrate inventory. Our inspectors are trained and certified to inspect corrosion, coating characteristics, coatings testing, surface preparation, coating application and failure analysis.

    By Leadcare, Inc. based in Long Island City, NEW YORK (USA).

  • Water Chemistry and Corrosion Control

    Two-to-three day review of water and steam chemistry, operation, and maintenance of the steam generating plant aimed at prevention/reduction of cycle component corrosion and scale and deposit formation. Results of the audit are recommendations for optimization of the plant procedures and practices.

    By Jonas Inc. based in Pomfret, MARYLAND (USA).

  • Cathodic Protection Services

    With more than 70 years of experience in the industry, MATCOR’s corrosion experts, direct services and proprietary products meet the corrosion prevention needs of major infrastructure assets such as oil, gas and water pipelines, above-ground storage tanks, power plants, energy facilities, deep wells and steel-in-concrete structures.

    By Brand Industrial Services, Inc. Office in Stoney Creek, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you