Only show results available in Virginia? Ok

Cured-in-Place-Pipe (CIPP) equipment for Water and Wastewater

  • Model 5000 Series - Roll Coatings

    Ecological Coatings in association with industry leaders in roll manufacture and coaters have developed waterborne release coatings that have similar non-stick properties as Teflon along with abrasion resistance from our epoxy base. Since our Roll Coatings are waterborne and will cure at room temperature, rolls can now be coated in the field and ...

    By Ecological Coatings, LLC based in Clifton Park, NEW YORK (USA).

  • Viper Steam Unit

    Speed Up Cure Time on Perma-Lateral Inversion & Pull In Place, Perma-Main.

    By Perma-Liner Industries, LLC. based in Clearwater, FLORIDA (USA).

  • Poly-Triplex - Structural Lining System

    Poly-Triplex is the industry’s leading product for permanent rehabilitation of structures in sewer collection systems that are failing due to chemical corrosion and infiltration of groundwater. These conditions result in structural fatigue, roadbed degradation, expensive costs for unnecessary treatment of groundwater, overload of the ...

    By Envirocort Technologies based in Vero Beach, FLORIDA (USA).

  • Nu- Drain - Non-Pressurized Epoxy Lining (CIPP)

    The (CIPP) cured in-place pipe restoration process is an economical and efficient alternative to traditional pipe system replacement. Our CIPP lining technology allows us to restore and Re-Nu aged, corroded piping systems to a “better than new” condition without removing them. The epoxy liner installed to the pipes’ interior ...

    By Nu Flow Corporate based in San Diego, CALIFORNIA (USA).

  • Inliner - Model STX - UV Light-Cured CIPP

    Inliner has long been recognized as an industry leader in Cured-in-Place Pipe (CIPP) renewal using resinimpregnated, felt-based liners cured with either hot water or steam. In a move consistent with our ongoing efforts to bring cutting-edge technology to the domestic pipeline rehabilitation market, Inliner Technologies is proud to offer Inliner ...

    By Inliner Technologies, LLC based in Paoli, INDIANA (USA).

  • LMK - Liner Lateral System

    The Performance Liner Lateral System is a unique cured in-place process that allows the installer the freedom to position the liner anywhere in the pipe by inverting through a cleanout. The liner can be directed either upstream or downstream using LMK’s patented guide shoe. In addition, this versatile system is capable of being installed in ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from Liner Lateral System Product line

  • LMK - Model CIPP - Non-Shear Rubber Couplings

    We now offer non-shear rubber couplings made specifically to fit the outside diameter of cured in-place pipe in order to connect to direct bury pipe. The exterior of the couplings are shielded with stainless steel to eliminate shifting which could result in offset joints. Stainless steel nuts and bolts offer superior clamping and non-shearing. ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from Non-Shear Rubber Couplings Product line

  • National Liner - Cured-in-Place Pipe (CIPP)

    The National Liner cured-in-place pipe (CIPP) products are a proven, cost-effective trenchless pipeline rehabilitation system. National Liner , established in 1994 has been installed in excess of 18 million liner feet of pipe. National Liner Liner is engineered with a 50-year design life to economically rehabilitate the damaged pipe.

    By National Liner, LLC based in Delafield, WISCONSIN (USA).

  • RS MAXPATCH - Lining Rehabilitation Systems

    In addition to RS Technik's complete lining rehabilitation systems, RS MaxPatch® is available for fast, trenchless, selective repair methods. RS MaxPatch® is a proven trenchless cured-in-place point repair system used to renew short sections of up to DN 500 mm diameter gravity-flow pipelines. The corrosion-resistant fiberglass composite ...

    By RS Technik AG based in Zug, SWITZERLAND. from Lining Rehabilitation Systems Product line

  • VeriCure for Monitoring Cure Temperature of CIPP

    Using patented technology, VeriCure monitors cure temperature continuously along the full length of a CIPP (cured-in-place pipe) liner during installation. This information helps ensure storm and sewer lines are rehabilitated to specification, and perform as intended.

    By Pipeline Renewal Technologies based in Randolph, NEW JERSEY (USA). from VeriCure for Monitoring Cure Temperature of CIPP Product line

  • InsituMain - Cured-in-Place Pipe (CIPP)

    For over 45 years, we have been installing cured-in-place pipe (CIPP) products for pipeline rehabilitation. Building on this experience, we developed the InsituMain® CIPP system, an AWWA Class IV, fully structural and pressure-rated CIPP technology. The InsituMain® CIPP system is certified to meet the NSF/ANSI Standard 61*.

    By Aegion Corporation based in St. Louis, MISSOURI (USA). from Cured-in-Place Pipe (CIPP) Product line

  • Makron - Panel Gluing Presses

    The Makron manufacturing system for mineral fibre sandwich panels is based on discontinuous press technology. Curing of the adhesive takes place in the strong hydraulic press while the panel does not move. The pressing plates are machine finished and heated up to an optimum temperature for the adhesive's curing. The press and the conveyors are ...

    By Makron Engineering Oy based in Hollola, FINLAND. from Panel Gluing Presses Product line

  • CIPP - Polyester Resins

    Interplastics Corporation has more than 40 years of experience with the polyesters and vinyl esters used in cured-in-place pipe applications. Polyester resins are available either filled or unfilled.These resins are the most commonly used resins in municipal sewer or storm water line applications. The chemical resistance of this type of resin is ...

    By CIPP Corporation, Inc. based in Hudson, IOWA (USA). from Polyester Resins Product line

  • Nova - Model UV - Main Line Sealing System

    The NOVA Main Line UV Curing System is an outstanding alternative to traditional Cured-in-Place Pipe (CIPP) approaches, implementing UV LED Technology to main line sewer relining. The NOVA Main Line UV Curing System is capable of operating in 6” to 60” diameter pipe rehabilitation tasks and comes with 1200 ft. of multi conductor cable.

    By Rush-Overland Manufacturing based in Odessa, TEXAS (USA). from Main Line Sealing System Product line

  • Aegion - Rotational Lining

    Rotational lining (aka rotolining) is a technology which allows us to bond a uniform, seamless polymer layer to the interior of virtually any metallic structure, regardless of shape and complexity.

    By Aegion Corporation based in St. Louis, MISSOURI (USA). from Rotational Lining Product line

  • LMK T-Liner - Gasket-Sealing

    LMK’s T-Liner is a one-piece homogenous main and lateral CIPP connection liner. T-Liner has a uniform wall thickness and incorporates compressible material at the upstream and downstream ends creating a smooth tapered transition to the host pipe. Both the mainline and lateral sections are formed as a structural cylinder that renews 18-inches ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from Gasket-Sealing Product line

  • Multiplexx - Model PVCP - Liners

    More effective in resisting corrosion than competing trenchless lining solutions. Proven superior in acid resistance to other technologies in tests conducted by the Sanitation District of Los Angeles County, MultiplexxTM PVCP Liners from Terre Hill Composites add years of utility to aging sewer structures while saving you tens of thousands of ...

    By Terre Hill Composites, Inc. (THC) based in Ephrata, PENNSYLVANIA (USA).

  • Lined Main Tap - CIPP or Folded Plastic Liners

    The LMT (Lined Main Tap) Saddle is an engineered saddle designed to connect a lateral pipe to a mainline liner. The LMT saddle is sized to surround the pipe beyond it’s spring line, which creates a clamping effect that draws the saddle firmly on to the new main pipe-liner. LMK’s proprietary adhesive/sealant bonds the LMT saddle to the ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from CIPP or Folded Plastic Liners Product line

  • LMK T-Liner Shorty - System for Main/Lateral CIPP Connection Liner

    LMK’s T-Liner Shorty system is a one-piece, structural, stand-alone homogenous Main/Lateral CIPP connection liner that extends 3 feet up into the lateral pipe. Shorty was designed for municipalities that want the connection sealed and the most value without the cost or legal issues associated with installing a cleanout. Shorty is the ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from System for Main/Lateral CIPP Connection Liner Product line

  • Water Main and Transmission Line Renewal

    IPR continues to expand the nation's largest and most comprehensive trenchless portfolio with the addition of RS BlueLine, a cured-in-place pipe (CIPP) technology developed by RS Technik for rehabilitation of pressure pipe. This unique design for renewing water pipe is the next evolution of CIPP derived from decades of technology development and ...

    By IPR based in Houston, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you