Dam Safety Equipment For Water And Wastewater Available In Austria
-
Manufactured by Fenno Water Ltd Oybased in FINLAND
We manufacture different kinds of dams used for adjusting and closing off flows. The turning dam has a dam plate that can be adjusted 90 degrees from the vertical to the horizontal position. These dams can be operated manually or using an electrical or pneumatic actuator. The dams may be very wide and used for the adjustment of even large flows. Such dams can be used for the controlled adjustment ...
-
Manufactured by Encardio-Rite Electronics Pvt. Ltd.based in INDIA
Encardio-rite normal and inverted plumb lines are simple and reliable systems that are widely used in civil engineering projects where highly accurate long-base rotation/tilt/relative displacement measurements are needed, like in high rise buildings, concrete and masonry dams, nuclear plants, etc. ...
-
Manufactured by Smartec SAbased in SWITZERLAND
Instrumented rebars and sister bars are used to measure load in concrete reinforcing bars or strain in concrete ...
-
Manufactured by Paratronicbased in FRANCE
Tank level sensor for Drinking water tank and ...
-
Manufactured by Worthington Products, Incbased in USA
BoatBuster barriers are barrel style booms engineered for use on large bodies of water and/or rough water conditions. Each fully assembled BoatBuster unit measures 3-feet in diameter x 4-feet long (dia 92 cm x 122 cm) long and features an engineered internal steel axle used to transfer load from one unit the next while providing a common point for connecting units ...
-
Manufactured by GF Instruments, s.r.o.based in CZECH REPUBLIC
ARES represents a well equipped resistivity and IP imaging system. Its variability, easy field operation (without PC), feeding from a standard 12 V battery or from a generator, rich support of standard and special electrode arrays and compatibility with widespread interpretation software makes ARES a cost effective and useful tool for working groups and research ...
-
Manufactured by Pizzi Instruments S.r.l.based in ITALY
The Radar Water Level System is a sensor suitable for measurements in large tanks and small channels and for the measurement of small and large flows. Available with different scales, it allows precise and reliable measurement and no contact with the liquid being monitored. Particularly suitable for level measurements in static situations, it can also be equally effective for measuring liquids ...
-
Manufactured by Measurandbased in CANADA
Connect sensorized segments in the field for a continuous deformation profile. SAAV Extend—our latest innovation addresses the challenges of continual deformation monitoring during the raising of tailings dams. Inspired by direct feedback from clients in the tailings and mine waste sectors, SAAV Extend provides a continual deformation profile throughout multiple dam raises with unparalleled ...
-
Manufactured by Fenno Water Ltd Oybased in FINLAND
We manufacture different kinds of closing gates of steel and plastic. The closing gates can be operated manually or automatically using an electrical or pneumatic actuator. The most commonly used model is a closing gate with a closing plate moving up and down. Automatic gates are also available as flow adjustment models with a stepless adjustable actuator. Closing gates can be installed in the ...
-
Manufactured by TRACOM Inc.based in USA
Parshall flumes are the most widely used type of flume in the industry. Developed in 1922 by Ralph L Parshall, the Parshall flume was designed for the United States Bureau of Reclamation. Then it was used for permanent flow monitoring installations. Today, it does the same, however includes many options and accessories and is used for many ...
-
Manufactured by TRACOM Inc.based in USA
RBC flumes were developed in the mid-1980’s to measure very low flows in furrows and small earthen channels. Although they are technically considered flumes, they are more accurately broad-crested weirs. In some ways, they are a mixture of Trapezoidal and Palmer-Bowlus flumes. RBC flumes have several distinct advantages, a few options and accessories, as well as various sizes and ...
-
based in SWEDEN
SMHI carries out hydrological model calculations which can be used for dam safety design flood computations. The flow calculations are carried out both for today"s climate conditions and for an expected future ...
-
Manufactured by bbe Moldaenke GmbHbased in GERMANY
The bbe Fish Toximeter observes the behaviour of fish in a tank under the influence of a stream of 'sample' water with the aid of a camera and continuous computer-assisted image analysis. This uncomplicated but highly sensitive instrument is designed to detect toxic substances in e.g. rivers, reservoirs, water supply systems, water treatment plant intakes and sewers.The instrument is based on the ...
-
Manufactured by ISTI - Instrumental Software Technologies, Inc.based in USA
GEObit provides compact solutions for quick-deploy seismic stations based on the GEOThree digitizer/recorder and C100 sensor. The GEOThree recorder has 3 input channels and integrated sensor electronics. The digitizer is based on a powerful, wide dynamic range 32bit delta-sigma analog-to-digital converter, with very low noise characteristics and excellent power supply rejection. The sampling rate ...
-
Manufactured by Smartec SAbased in SWITZERLAND
For surface mounting or embedding in concrete and mortars. Ideal for long-term structural deformation monitoring. 20 year track record in field ...
-
Manufactured by bbe Moldaenke GmbHbased in GERMANY
An instrument for the fast and sensitive detection of toxic substances in water. The bbe Algae Toximeter continuously monitors water for the presence of toxic substances. Standardised algae are mixed with the sample water and the instrument detects the photosynthetic activity of the algae. Damage to the algae, caused e.g. by herbicides, causes a reduction in algae activity and activates an alarm ...
-
Manufactured by LAMBRECHT meteo GmbH - an AEM brandbased in GERMANY
The FTS DigiTemp submersible water temperature sensor a rugged SDI-12 sensor for measuring the temperature of soil, water or other liquids with scientific- grade accuracy and long-term reliability. It makes adding automatic temperature monitoring to existing stations incredibly easy and cost-effective. DigiTemp is small enough to easily deploy through standard 1” (2.5 cm) PVC conduit with ...
-
Manufactured by Sutron Corporationbased in USA
The Compact Constant Flow Bubbler (Part #56-0133-25-1S), 50% smaller than Sutron’s original Constant Flow Bubbler, is a self-contained, precision device to measure water levels & temperature. It consists of a pump, tank, manifold, control board, display/keypad & enclosure. The new Compact CF Bubbler houses all components within a 10.5”x 8.5”x 7.5” polycarbonate ...
-
Manufactured by Nanjing Sky MEMS co., ltd. (SkyMEMS)based in CHINA
INC1000M 0.01° China ModBus Inclinometer With Temp. Compensation from manufacturer is high performance single / dual axis RS485 Modbus inclinometer sensor with temperature compensation, and the temperature coefficient (-20~50 °C) is as low as ±0.0004º/ºC, it enjoys high accuracy: ±0.01° (room temperature) and the measurement range is from ±5° to ...
-
based in CANADA
Lite Sight is the lightest and most compact portable environmental camera on the market today. This system is designed to make transport from site to site easier than ever. Lite Sight is ruggedly constructed and engineered for the rigors of field applications and can be set up for a week, a month, a season, or longer. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you