Deionized Water Equipment For Water And Wastewater Available In Nebraska
-
PremiumManufactured by CETCObased in USA
BENTOMAT 200R GCL is a geosynthetic clay liner (GCL) consisting of a layer of sodium bentonite between woven and nonwoven geotextiles, which are needlepunched ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Electrodeionization or EDI, is a continuous and chemical-free process of removing ionized and ionizable species from the feed water using DC power. EDI is typically used to polish reverse osmosis (RO) permeate and to replace conventional mixed bed ion ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HG KUBE is able to generate up to 260 cc/min of Hydrogen with purity better than 99.9996% and pressure up to 9 bar (130 psi). The HG KUBE includes a cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Consisting of two hydrogen and one oxygen atoms, water contains many different substances. Pure water, on the other hand, is obtained as a result of many different chemical processes in the laboratory environment of fountain or spring water. Apart from the water molecules in its structure, it is water with undissolved solids and minerals. Pure water is obtained by heating at a certain temperature ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Consisting of two hydrogen and one oxygen atoms, water contains many different substances. Pure water, on the other hand, is obtained as a result of many different chemical processes in the laboratory environment of fountain or spring water. Apart from the water molecules in its structure, it is water with undissolved solids and minerals. Pure water is obtained by heating at a certain temperature ...
-
ShowcaseManufactured by membraPure GmbHbased in GERMANY
Engineered for the production of ultra-pure water directly from tap water, the Aquinity² models specialize in generating ultra-pure water straight from the tap source. The Aquinity² P10 ultra-pure water system features a reverse osmosis (RO) module that directly delivers deionized water into an integrated 10L tank. Subsequently, Type I grade water is produced using a polisher cartridge. ...
-
PremiumManufactured by Much More Water A/Sbased in DENMARK
All BlueBoxes are installed with the MMW proprietorial water technology developed over many years by MuchMoreWater. The equipment is manufactured from best-in-class quality components to obtain very compact, lightweight and mobile water cleaning systems. The standard units have been designed to comply with basic needs and typical client criteria, but specifications can be altered to accommodate ...
-
PremiumManufactured by Myron L Companybased in USA
The unique circuitry of the 750 Series II Resistivity Monitor/controllers guarantees accurate and reliable measurements. Drift-free performance is assured by “field proven” electronics, including automatic DC offset compensation and highly accurate drive voltage. Since temperature compensation is at the heart of accurate water measurement, all Myron L® Monitor/controllers feature ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
Market-leading analytical tool for anaerobic batch fermentation testing. The Automatic Methane Potential Test System (AMPTS®) is the market-leading analytical tool for anaerobic batch fermentation testing. Now on its third generation, AMPTS III is automated and fully integrated for easy access to sampling, analysis, recording and report generation. AMPTS III houses 18 glass reactors for tests ...
-
PremiumManufactured by membraPure GmbHbased in GERMANY
Engineered for producing both pure water and ultra-pure water from tap water, the Aquinity² E versions employ reverse osmosis and a conditioning module to yield deionized water ( 5 MOhm x cm) stored in an external reservoir (35 or 70 liters). This water is readily accessible for tasks such as manual glassware cleaning or connection to a laboratory dishwasher. From the storage tank, ultra-pure ...
-
PremiumManufactured by membraPure GmbHbased in GERMANY
Engineered for the production of both pure water and ultra-pure water from tap water, the Aquinity² P versions utilize reverse osmosis and a conditioning module to generate deionized water ( 1 MOhm x cm) delivered to an external reservoir (35 or 70 liters). This water can be accessed directly (e.g., for manual glassware cleaning) or connected to a laboratory dishwasher. The ultra-pure water is ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Megaflux-CUF is a DIY assembly type UF membrane skid block commercialized exclusively for water purification. Megaflux-CUF is a UF system for large-capacity water treatment that combines a UF module with a pipe-integrated structure, a prefabricated pipe composed of injection products, and a base frame. Megaflux-CUF, which is easy to assemble and compact, can be assembled on site and minimizes ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 3400-WTR Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Tekran 3400 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long life. The Model 1306 can supply enough water for up to four CEM systems. The filter ...
-
PremiumManufactured by membraPure GmbHbased in GERMANY
Engineered for producing pure water from tap water, the AquaRO², AquaRO²DI, and EDI² series are built on reverse osmosis (RO) technology, efficiently generating deionized water. The EDI² series enhances this process by utilizing an EDI cell to achieve Type II water quality. These systems offer reliability and compactness at minimal operating costs. One of the key advantages of both series lies ...
-
PremiumManufactured by membraPure GmbHbased in GERMANY
Tailored for the production of ultra-pure water from permeate sourced from either reverse osmosis or deionized water, the Astacus² system is purpose-built for this application. Available in various configurations (Reagent, Analytical, and LifeScience), the Astacus² water purification system is designed to meet the specific demands of ultra-pure water for diverse applications. The Analytical ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Complete flow control of ultrapure water through a liquid particle counter is critical to ensure accurate and actionable data. Particle Measuring Systems (PMS) offers the new FC-200 and FC-100 series of pressure balancing flow controllers as the perfect complement to our high precision liquid particle counters. The FC-100 automatically adjusts to pressure changes within the particle counting ...
-
PremiumManufactured by Myron L Companybased in USA
The Ultrameter III 9P AHL Titration Kit, is based on the tried and tested design of the Ultrameter II. The 9P adds the ability to perform in-cell alkalinity and hardness titrations either as stand-alone measurements or as part of an LSI calculation. Alkalinity, hardness, pH and temperature values can be manipulated in the LSI calculator to predict the effect of changes on water balance. ...
-
PremiumManufactured by Myron L Companybased in USA
All Myron L handheld instruments are factory calibrated with NIST traceable Standard Solutions having specific conductivity/ppm values. MyronL Company Standard Solutions are made under strictly controlled conditions using reagent grade salts. These salts are mixed with deionized water having a resistivity of at least 5 megohms-cm ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you