Only show results available in Massachusetts? Ok

Dewatering Centrifuges equipment for Water and Wastewater

  • Premium

    Hydroflux - Model HAUS Series - Centrifuges

    The HAUS Series of Environmental Decanters are modern and high performance – ideal for any Industrial Sludge Dewatering application.

    By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Hydroflux Industrial - Sludge Dewatering Product line

  • Premium

    Flottweg - Model Xelletor Series - Sewage Sludge Dewatering

    The X Series – A Revolution in Sludge Dewatering in Sewage Treatment Plants; Sewage sludge dewatering offers enormous potential savings for the operators of sewage treatment plants. The costs of transport and disposal of the dewatered sewage sludge frequently make up 80% of operating costs. Depending on the capacity of the plant, 1% more dry ...

    By Flottweg SE based in Vilsbiburg, GERMANY. from Decanter Product line

  • Premium

    DEVISE - Model CSDP - Containerized Sludge Dewatering Plants

    Designed and pre-fabricated to deal with small to medium size Wastewater treatment plants, offering a complete solution for the management (thickening & dewatering) of biological sludge produced by municipal sewage or industrial effluent applications. The plant capacity in terms of waste sludge to be treated ranges from 1.0 to 9.6 m3/h for ...

    By DEVISE ENGINEERING S.A. based in Athens, GREECE. from Other Products Product line

  • Premium

    Flottweg - Model HTS - Sewage Sludge Dewatering Decanter Centrifuge

    The Flottweg HTS Decanter: Highest Dry Matter Content for Sewage Sludge Dewatering. Transport and disposal costs, at over 70 percent, represent by far the largest cost item in sludge dewatering. A powerful dewatering assembly is thus an important criterion. With a Flottweg HTS Decanter in the C series, you can achieve the highest possible total ...

    By Flottweg SE based in Vilsbiburg, GERMANY. from Decanter Product line

  • Premium

    Intereco - Model TF Series - Belt Filter Table

    Belt filtering table TF is used instead of a static thickener, with expensive concrete works, to thicken sludge before a digestor or a following dewatering unit (as belt press, plate filter press, centrifuge). Belt filtering tablet TF is complete with a vertical cylindrical reactor (with a variable speed mixer) to help sludge and polyelectrolite ...

    By Intereco S.a.s based in Scalenghe (TO), ITALY. from Sludge Treatment Product line

  • Premium

    Flottweg - Model C Series - Decanter Centrifuges for Wastewater and Sewage Sludge

    Flottweg Decanter Centrifuges for Wastewater and Sewage Sludge; Requirements for the quality and efficiency of sewage treatment plants increase year after year, driven not least by the increasing costs of energy and disposal. As a result, the state of the art is now to use decanter centrifuges to dewater the incoming sludge. The high-performance ...

    By Flottweg SE based in Vilsbiburg, GERMANY. from Decanter Product line

  • Premium

    Flottweg - Model C2E - Decanter Centrifuges for Small Treatment Plants

    Flottweg presents a new era of sludge dewatering for small sewage treatment plants. The C2E decanter centrifuge was developed specifically for the dewatering and thickening of smaller sludge loading rates. It features all of Flottweg's know-how in a compact, space-saving design.

    By Flottweg SE based in Vilsbiburg, GERMANY. from Decanter Product line

  • Aage - Model VGC - Gypsum Centrifuges

    Wet scrubbing processes are often used for flue gas desulphurisation FGD in coal fired power plants, waste incineration and cement plants. The gypsum generated by the FGD process can be washed and separated from the mother liquid by using gypsum centrifuges.

    By Aage Christensen A/S based in Glostrup, DENMARK. from Centrifuges Product line

  • Model A540 - Automatic Centrifuge

    A540 automatic centrifuges are designed with innovative, cost-effective features and integrated processing advantages that are not found on competitive units.

    By US Centrifuge Systems based in Manlius, NEW YORK (USA). from Automatic Centrifuges Product line

  • HeGo GoFloc - Model DG - Polymer Flocculants

    Polymer flocculants of the GoFloc series Water treatment: Treatment of filter backwash, Dewatering of waterworks sludges.

    By HeGo Biotech GmbH based in Berlin, GERMANY. from Gofloc Product line

  • Decanter Solid Bowl Centrifuge

    The Decanter / Solid Bowl Centrifuge operates on the principle of sedimentation. Often the solids are too fine to be dewatered satisfactorily in the filtering centrifuges. They can be separated in solid bowl centrifuges provided their sedimentation speed in the mother liquid is sufficient. The sinking settling speed which is determined by Particle ...

    By Rotofilt Engineers Limited based in Ahmedabad, INDIA.

  • US Screen - Screw Press Screens

    Screw presses are used in a wide variety of dewatering applications, often in the same applications as belt presses, centrifuges, and filter presses. The screw press is a simple, slow moving mechanical device. Dewatering is continuous and is accomplished by gravity drainage at the inlet end of the screw and then by reducing the volume as the ...

    By U.S. Screen Company based in Wellington, OHIO (USA). from Screens Products Product line

  • SCS - Agricultural Waste Separation System

    Separation systems are an essential part of today's waste processing industries, including Agriculture. In livestock production, a surplus of nutrients relative to crop requirements may be produced, increasing the risk of nutrient losses to the environment.

    By Solids Control Services (SCS) based in Westhill, UNITED KINGDOM.

  • Model VA - HPI - Injector Mixer for Sludge Thickening

    The VA - Injector Mixer HPI (high performance injector mixer) is our latest development for efficient and economical conditioning of sludges or slurries with an organic polymer or other flocculants. The VA - Injector Mixer HPI is a product of Wasser+Abwassertechnik GmbH and has been successfully proven in more than 89 municipal and ...

    By W AT GmbH-Wasser Abwassertechnik GmbH based in Linz, AUSTRIA.

  • Decanter Centrifuge Dewatering Unit

    During the whole treatment process, the centrifugal dewatering unit performs cutting grinding, feeding, thickening, dewatering, slagging and conveying of materials, dosing of flocculant and monitoring on running state of the whole system through the control system of PLC+ LCD. For users, the unit, as a complete set of fully automatic operation ...

    By Green Environmental Co., Ltd. based in Xi’an, CHINA.

  • Sludge Dewatering System

    HUBER is able to offer all common methods of sludge dewatering: screw presses, belt filter presses, and centrifuges.  

    By Picatech Huber AG based in Horw, SWITZERLAND. from Sludge Treatment Product line

  • CNP - Model THK Series - Sludge Thickener

    The Centrisys Sludge Thickener (THK Series) is specifically engineered to achieve high-performance thickening of biosolids. The non-conical design results in greater G-volume, allowing for the highest capacity of flow to the centrifuge. The THK improves upon existing technologies using fundamental principles of a 1) Centrifuge - 3,000 Gs, 2) ...

    By CNP – Technology Water and Biosolids Corporation based in Kenosha, WISCONSIN (USA).

  • Liquid Cationic Polymers

    This product is liquid cationic polymers of different molecular weight which work efficiently as primary coagulants and charge neutralization agents in liquid solid separation processes in a wide variety of industries. It’s used for water treatment and paper mills.

    By Yixing Cleanwater Chemicals Co.,Ltd. based in Yixing, CHINA. from Polyamine Polymer Product line

  • RJ-Environmental - Model MD202 - Dewatering Filter Press

    The dewatering body is formed by a screw axis with fixing and moving plates overlapping, as the inner diameter of screw axis is larger than the moving plate, it do the circular motion with the screw axis to prevent clogging, to ensure the continuous operation

    By RJ Environmental Equipment Co.,Ltd. based in Shanghai, CHINA. from MD Sludge Dewatering Machine Product line

  • solidXpress - Screw-Press

    For dewatering surplus and digested sludge to 18-28% DS Our revolutionary solidXpress combines the high dewatering efficiency of a centrifuge with the low power consumption of a screw press. Unlike conventional screw presses, it has a high slenderness ratio and an auto-adaptive controller.

    By Sülzle Klein GmbH based in Niederfischbach, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you