Dewatering Systems Equipment For Water And Wastewater Near Egypt
-
by IETOSbased in EGYPT
What differentiate our systems being unrivaled in compactness, spectacularly odorless, with low power consumption, easy maintenance, quick installation, less civil work involved, reduced operational noise, flexible in reworking and negligible sludge generation. IETOS designs, supplies, implements, commissions, operates and maintains wide range of Sewage Treatment Plant fulfilling clients’ ...
-
Manufactured by MZT Pumpibased in MACEDONIA
Single stage, low pressure, centrifugal end suction pump with an axial inlet into the impeller and flanged bearing frame. Simple and compact design, suitable for flexible coupling to electric motor or internal combustion engine as a drive. Fast and easy dismounting without detaching from the existing ...
-
Manufactured by MZT Pumpibased in MACEDONIA
Horizontal Split Case Double Suction Centrifugal Pumps D are engineered to pump clean water or low viscosity clean liquids at moderate heads more economically than any other type of pump. All fabricated parts are standardized and accurately machined for true alignment, increasing overall durability. Impellers are statically and dynamically balanced and constructed with double inlets, practically ...
-
Manufactured by MZT Pumpibased in MACEDONIA
This vertical and semi-axial pump converses the capacity range up to 600 (l/s) against head of up to 210 (m), “DP” and “VPH” type are produced as single and multistage pumps while “HMF” type is manufactured only as single stage pump. Centrifugal pump with one or more semi axial impellers. It is applied for installation into the wells. There is a possibility for ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
Perforated stainless steel screen panels are carried on heavy-duty chains and incorporate holes of 6 mm (1/4"") or 3 mm (1/8"") diameter giving fine screening in any ...
-
Manufactured by KAMPS s.a.based in BELGIUM
In lagoon and in some lacs and ponds, the organic sludge settle in the bottom reducing the volume of the water ponds. More important, when this sludge is not stabilised it will create odours and process perturbation due to anaerobic sludge.. Anaerobic decay produces toxic gas which will come some or later in the atmosphere. The methane gas has a very negative effect on greenhouse gas…that ...
-
Manufactured by KAMPS s.a.based in BELGIUM
Designed for continuous thickening and dewatering of municipal and industrial sludge in small capacities. Belt width : 0,60 and 1,20 m. Sludge flowrate : up to 15 m3/h. compact design for real space saving. Easy maintenance and supervision. Low energy consumption and operating costs. Full enclosure for safety and odor ...
-
Manufactured by KAMPS s.a.based in BELGIUM
Designed for continuous thickening and dewatering of municipal and industrial sludge in small and medium capacities. Belt width : 1 to 2,50 m. Sludge flowrate: up to 40 m3/h. Easy maintenance and supervision. Reduced operating costs. Full enclosure for safety and odor extraction. Various configurations : “long” or “high” version. Material : stainless steel 304L, 316L or ...
-
Manufactured by KAMPS s.a.based in BELGIUM
Designed for continuous thickening and dewatering of municipal and industrial sludge in medium and big capacities. Belt width : 1 to 2,50 m. Sludge flowrate: up to 150 m3/h. Easy maintenance and supervision. Reduced operating costs. Full enclosure for safety and odor extraction. Various configurations : “long” or “high” version. Material : stainless steel 304L, 316L or ...
-
Manufactured by KAMPS s.a.based in BELGIUM
Designed for dewatering of municipal and industrial sludge in small or big capacities. Manual or automatic plate Shifting System. Full automatic system with 'inteligent' scraper. Various accessories : electrical control panel, Drip tray, process engineering,high pressure washing system, pneumatic system, acid washing system control panel for the whole ...
-
Manufactured by KAMPS s.a.based in BELGIUM
Designed for continuous mechanical dewatering of municipal and industrial sludge in medium and big capacities. Belt width : 1 to 3 m. Sludge flowrate : up to 30 m3/h. Low energy consumption and operating costs. Clean operating system. Very clean operation. Easy access for supervision and maintenance. Visual control of the sludge during dewatering. Material : stainless steel 304L, 316L or ...
-
Manufactured by KAMPS s.a.based in BELGIUM
Designed for the continuous mechanical dewatering of municipal and industrial sludge in small capacities. Belt width : 0,60 and 1 m. Sludge flowrate : up to 6 m3/h. Easy maintenance and supervision. Low energy consumption and operating costs. Very clean operation. Full enclosure for safety and odor extraction. Material : stainless steel 304L, 316L or ...
-
Manufactured by KAMPS s.a.based in BELGIUM
Designed for the continuous mechanical dewatering of municipal and industrial sludge in small and medium capacities. Belt width : 1 to 2 m. Sludge flowrate: up to 12 m3/h. Low energy consumption and operating costs. Clean operating system. Very clean operation. Easy access for supervision and maintenance. Visual control of the sludge during ...
-
Manufactured by Mena Water FZCbased in UNITED ARAB EMIRATES
Sludge Thickeners are widely used in many wastewater and water treatment plants. They are generally placed before filter presses, belt presses and centrifuges to achieve higher sludge concentration before final dewatering. Sludge thickeners are also used to increase the sludge concentration before biogas reactors, thus enabling the use of smaller biogas reactors. Other applications are to reduce ...
-
Manufactured by Mena Water FZCbased in UNITED ARAB EMIRATES
Grit classifier are used for the separation of solids from water and consisting of a funnel-shaped separation tank with a screw conveyor. Application areas range from municipal sewage plant to separation of sediment and heavy materials in production and process waste water in the chemical, food, paper and waste disposal industries. The grit separator provides high performance coupled with low ...
-
Manufactured by Mena Water FZCbased in UNITED ARAB EMIRATES
The belt filter press is composed of two units, the pre-thickener and the sludge press. The pre-thickener performs the initial solid/liquid separation stage, taking sludge solids concentration from 0.5-3% up to 5-15%. AThe dewatering in the press occurs firstly in the low pressure zone, then in the wedge zone and finally in the high pressure zone where the filter cake is compressed between the ...
-
Manufactured by Mena Water FZCbased in UNITED ARAB EMIRATES
This package plants are completely automatic machines for sludge dewatering. Included are all functions like sludge conditioning, bag filling and draining cycles, controlled by an integral control panel. The fully packaged design of this machine provides a simple and rapid installation, which is of benefit to the installer and end-user. The bag also acts as a strong container for the transport of ...
-
PremiumManufactured by Dewaco Ltd.based in FINLAND
DEWA A-P automatic polymer preparation systems are an important part of the effective and reliable wastewater treatment process. It is applicable for both municipal and industrial applications. The batch preparation technology guarantees the best possible concentration formation. All of the DEWA polymer preparation A-P units are designed for a one-hour ageing time from initial mixing to ...
-
PremiumManufactured by Dewaco Ltd.based in FINLAND
The DEWA P-C “Mini” sludge dewatering unit is ideal for small-scale sludge dewatering applications. This compact twin belt design has a small gravity thickening zone followed by a wedge and pressing zone. In process principle “Mini” imitates its big brothers, DEWA N-PD XL and FPD. In the performance “Mini” will reach the lower dewatering requirements and is ...
-
PremiumManufactured by Dewaco Ltd.based in FINLAND
The DEWA BTN Gravity Belt Thickener is a fully enclosed system, designed to increase the dry solid concentration of the feed sludge considerably. Enclosed construction enables odor containment within the unit, simplifying odor extraction by the ventilation pipe located on the top of the cover. This advanced and sophisticated design concept creates a clean and odor-free ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you