Water Treatment Plant (Digestate) Equipment
-
Manufactured by Nantong Rongheng Environmental Equipment Co., Ltd.based in CHINA
HB Series is the single stage centrifugal turbo blower directly coupled with a permanent magnetic motor. Customers can economically and environmentally get benefit from HB Series which is suitable for the customers’ ...
-
Manufactured by Canadian Crystallinebased in INDIA
Sewage Treatment Plant is a facility designed to receive the waste from domestic, commercial and industrial sources and to remove materials that damage water quality and compromise public health and safety when discharged into water receiving systems. Today, technological progress is increasingly broadening the range of ...
-
Manufactured by Sai Waterbased in INDIA
We Design, Fabricate, Supply, Erection and Commissioning Sewage Treatment Plants (STP) for treating sewage generated by Industry, large colonies, Hotels, Hospitals, IT Parks and commercial ...
-
Manufactured by SIMOP FRANCE SASbased in FRANCE
Upstream from an OXYMOP, the primary decanter is a pre treatment device designed for the collect, the sedimentation and the storage of the suspended solids in domestic wastewater (soils water and household waste ...
-
Manufactured by Simpec S.r.l.based in ITALY
Water and wastewater depuration takes place through a combination of technologies and processes needed to remove the pollutants contained therein. Simpec builds two main types of wastewater treatment plants: chemical/physical purification plants (continuous and discontinuous batch) and biological purification ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
We recognize that innovation in wastewater technology is of utmost importance. Main issues are how to reduce energy consumption and contribute to a circular economy. This has led to new innovative sanitation solutions such as decentralized wastewater treatment, resulting in the regeneration of valuable material, and residues that are ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
Our double-pipe heat exchanger is used to efficiently heat sludge at biogas and waste water treatment plants. Using the counter-flow principle, sludge is heated evenly, and flows back to the process. Our WT is custom-designed, manufactured entirely in stainless ...
-
Manufactured by Canamidex International Corp.based in CANADA
Our drum thickeners are designed for relatively low-throughput thickening requirements in waste water treatment plants (WWTP). Made entirely of stainless steel, they complete our thickening portfolio to provide the most economical solution for most thickening ...
-
Manufactured by FKC Co., Ltd.based in USA
Applications. Municipal WWTP Sludges of All Types (Aerobically Digested, Anaerobically Digested, Raw). Primary, Secondary, or Mixed Sludges. Water Treatment Plants. Industrial Bio-solids. Septage & Grease Trap. Food Processing. Chemical Plant Waste. Dredged Mud & ...
-
Manufactured by f.u.n.k.e. SENERGIE GmbHbased in GERMANY
Due to the power and heat flow characteristics of waste water treatment plants, f.u.n.k.e. SENERGIE combined heat and power systems are perfectly suited to provide the power demand. Sewage gas amount is about 15 to 35 litres per resident per day has an energy content of about 585 BTU/ cubic foot. (By comparison, the energy content of natural ...
-
Manufactured by Micro-Blaze - a brand by Verde Environmental, Inc.based in USA
and run-off can be safely sent to the facility waste water treatment plant. The numerous strains of microbes in Micro-Blaze Non-Formulated provide a synergistic degradation of the organic and hydrocarbon ...
-
Manufactured by ELIQUO WATER GROUP GmbHbased in GERMANY
EloPhos is a system for the recovery of phosphate from digested sewage sludge emanating from waste water treatment plants with biological phosphate (bio-P) removal in the form of Magnesium-Ammonium-Phosphate (“struvite”) fertiliser. The EloPhos process is based on the precipitation of dissolved phosphate from digested sewage ...
-
Manufactured by P2W Ltd.based in ISRAEL
Every wastewater treatment plant produces sludge that entails withdrawal, digestion, volume reduction and disposal. Due to its complexity, sludge treatment constitutes the highest challenge to designers and operators of waste water treatment plants. Throughout years of operation, BJIS have ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Economic, compact and safe The ANDRITZ Paddle dryer can be used for dewatering sludge (of various types) in waste water treatment plants. Many wastewater treatment plants are coping with a waste stream of digested sludge. The sludge is normally dewatered by means of a centrifuge or belt filter press. After ...
-
Manufactured by Salherbased in SPAIN
The vertical treatment plant with settling – digestion chambers, biological filter and grease chamber CVC-D is a GFRP equipment with orthophthalic resins for the elimination of 70 – 80% of organic matter (BOD5) and 65 – 70% suspended solids (SS). This set of treatments includes settling, digestion, biological ...
-
Manufactured by Alvest MONT, SK s.r.obased in SLOVAKIA
Installing / lifting of the HANA units are got easily because no empting of the basin is required. The HANA units stand on the bottom of the basin because their weight assures full stability. No anchoring and no special lifting device, nor any reinforced concrete works are ...
-
Manufactured by Econvert Water & Energy BVbased in NETHERLANDS
Econvert-DGF® combines waste and wastewater in one single process. The Econvert-DGF system is a revolutionary and highly innovative solution, especially tailored for food and beverage plants to effectively treat raw wastewaters that contain high TSS and FOG concentrations. Additional benefits can be realized when the plant also digests ...
-
Manufactured by Premier Tech Water and Environmentbased in CANADA
Non-Electric plants have a ZERO energy requirement and are the only sustainable sewage treatment ...
-
Manufactured by Ecozymebased in SOUTH AFRICA
A proprietary treatment of specially selected bacteria and microbial strains which produce massive concentrations of digestive enzymes when introduced into wastewater and sewerage ...
-
Manufactured by Ecomembrane Srlbased in ITALY
The constant-pressure CUPOLA M3 is designed to collect and accumulate biogas from directly over anaerobic digesters or sludge holding tanks. They are made with biogas resistant polyester reinforced PVC membranes seam welded by high frequency electronic machines. The air discharge is made with specially designed mechanic valves, while the biogas safety system (necessary in case of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you