TPH analyzer News
-
Factory Calibrated Infrared Analyzers Provide On-Site Oil in Water or Soil Measurements in 10-15 Minutes
Wilks Enterprise is pleased to announce the availability of factory-calibrated portable infrared analyzers for determining the concentration level of oil in water or soil. The InfraCal TOG/TPH Analyzers provide easy, on-site measurements in 10-15 minutes and eliminate the need to wait for off-site results. The InfraCal Analyzers are ideal for use by non-technical personnel on oil drilling ...
-
On-Site TPH-in-Soil Measurements in less than 10-15 Minutes
On-site analysis of total petroleum hydrocarbon (TPH) concentration levels in soil, using S-316 instead of Freon for the extraction process as recently approved by the ASTM, is easily handled using the Infracal TOG/TPH Analyzer, Model CVH, manufactured by Wilks Enterprise, Inc. The Infracal TOG/TPH Analyzer is a portable infrared (IR) analyzer that quickly determines TPH levels in less than ...
-
On-site measurement of fats, oils and greases in wastewater in under 10 minutes using portable IR analyzers
InfraCal TOG/TPH Analyzers from Wilks Enterprise provide accurate, easy on-site analysis to assist regulators, as well as industry, to reduce the build up of fats, oils, and greases (FOG) in sewers. These analyzers are ideal for use by publicly operated treatment centers as it is important to locate and monitor sites that are suspected of dumping high levels of FOG into the sewer line. In ...
-
Portable Oil/Grease Analyzers Provide Field-Proven Methodology to Assist with Gulf of Mexico Oil Spill
East Norwalk, CT, June 7, 2010 -- InfraCal TOG/TPH Analyzers, manufactured by Wilks Enterprise, Inc., provides field-proven methodology to assist with the clean-up of the oil spill in the Gulf of Mexico. The InfraCal Analyzers are currently used by numerous oil companies worldwide on offshore oil platforms and in refineries for easy, on-site infrared measurement of total oil and grease (TOG) and ...
-
New video on the InfraCal TOG/TPH Analyzers for measuring fats, oil and grease in wastewater
We have just completed a new video on our InfraCal TOG/TPH Analyzers for measuring fats, oil and grease levels in water and wastewater, as well as TPH in soil. We hope you will take a few minutes to view this video and share it with others in your organization who may have a need for easy, on-site measurements of this type. The following are links to access the video: On our website On ...
-
Portable IR Analyzers Measure Fats, Oil and Grease Levels in Wastewater
With stricter wastewater regulations facing all industries, it is important to ensure excessive levels of fats, oil, and grease (FOG) are not being discharged. The InfraCal TOG/TPH Analyzers provide accurate, easy on-site analysis to help regulators and industry reduce the discharge and build up FOG in sewers. These analyzers are ideal for use by publicly operated treatment centers as it is ...
-
Measuring fats, oils and greases in wastewater
Portable mid-IR Analyzers from Wilks Enterprise provide accurate, easy on-site analysis to assist regulators, as well as industry, to reduce the build up of fats, oils, and greases (FOG) in sewers. These analyzers are ideal for use by publicly operated treatment centers as it is important to locate and monitor sites that are suspected of dumping high levels of FOG in the sewer line. In addition, ...
-
Measuring hydrocarbon levels in wastewater in under 15 minutes
Determining total hydrocarbon or oil/grease levels to ensure compliance with governmental permit requirements for discharging wastewater is a worldwide problem facing numerous industries. To ensure compliance with these regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total hydrocarbon concentration. Wilks ...
-
Oil-in-water measurements on off-shore platforms, in refineries or wastewater treatment facilities
The InfraCal TOG/TPH Analyzers, manufactured by Wilks Enterprise, Inc. are specifically designed for easy, on-site measurement of total oil and grease (TOG), total petroleum hydrocarbon (TPH), and fats, oil and grease (FOG) concentration levels in produced water on off-shore platforms or wastewater in refineries or treatment facilities. Typical analysis time is under 15 minutes, including ...
-
Fats, Oil and Grease Levels in Wastewater Measured On-Site in Under 10 Minutes
Stricter wastewater regulations worldwide are aimed at ensuring excessive levels of fats, oil, and grease (FOG) in wastewater are not being discharged. The InfraCal TOG/TPH Analyzers from Wilks Enterprise provide accurate, easy on-site analysis to help regulators and industry reduce the discharge and build up FOG in sewers. These analyzers are ideal for use by publicly operated treatment centers ...
-
Portable IR analyzer used by Water Environment Research Foundation in wastewater study
The Water Environment Research Foundation (WERF) recently sponsored an extensive study to evaluate the performance of different grease interceptor designs. The InfraCal TOG/TPH Analyzer, Model HATR-T2, from Wilks Enterprise, was used to measure the concentration levels of fats, oil and grease (FOG) in the wastewater leaving the interceptors. The complete study has just been released by WERF ...
-
On-Site Wastewater Analysis
The US EPA, as well as other governmental regulatory agencies, have instituted stricter regulations covering discharges of “oily wastes” from facilities into publicity owed treatment plants (POTWs) facilities, forcing numerous industries to monitor their effluent more closely prior to discharge. This regulations affect such industries as food – both processors and restaurants, metal fabrication, ...
-
On-Site Oil in Water Measurements Ensure Compliance with Discharge Permits
Determining total oil in water levels for compliance with governmental regulatory permit requirements for discharging wastewater is a worldwide problem facing all segments of the oil and gas industry. To ensure compliance with these regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total oil/grease ...
-
New Video features Portable Infrared Analyzers for On-Site Measurement of Oil in Water/Soil
Wilks Enterprise is pleased to announce a new video featuring the measurement of oil and grease in water/soil with easy-to-use portable infrared analyzers. This 3-minute video demonstrates how on-site measurements with the InfraCal TOG/TPH Analyzers can save time and money, as they allow oil and grease levels in wastewater to be determined in under 15 minutes. These measurements help ensure ...
-
New Oil in Water Method Allows Onsite Analysis
S. Norwalk, CT, April 19, 2007 -- New European regulations governing the measurement of oil-in-water, a 15% hydrocarbon emission reduction target and Hydrocarbon Trading have all heightened the importance of monitoring oil concentration levels. As a result, US instrument manufacturer, Wilks Enterprise, Inc., and their UK representative – Quantitech, Ltd. - have reported a rapid growth in demand ...
-
Measuring oil/grease levels in water to help oil/gas industry comply with permit discharge regulations
Determining total oil/grease levels to ensure compliance with governmental regulatory permit requirements for discharging wastewater is a worldwide problem facing all segments of the oil and gas industry. To ensure compliance with these regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total oil/grease ...
-
White Paper covering Emulsion-Breaking Techniques for Accurate Oil in Water Measurements published by Wilks Enterprise
East Norwalk, CT – A White Paper entitled, “Emulsion-Breaking Techniques to Ensure Accurate Oil in Water Measurements,” was recently published by Wilks Enterprise, Inc. Certain water samples, such as those containing detergent, may form an emulsion when oil in water extraction into a solvent is done. In order to ensure an accurate measurement, the emulsion must be broken. The ...
-
New Videos Demonstrate the Ease of using Portable Infrared Analyzers for On-Site Oil in Water Measurements
Wilks Enterprise is pleased to announce several new videos that demonstrate the ease of using portable infrared analyzers for measuring the level of total oil and grease in water. These short videos show how on-site measurements with the InfraCal TOG/TPH Analyzers take just a few simple steps to obtain accurate part per million (ppm) results in under 15 minutes. They are readily used by ...
-
Portable Infrared Analyzers Help Ensure Compliance with Oil in Water Effluent Discharge Levels
Oil in wastewater discharges are highly regulated and each region of the world has their specific regulations. For the off-shore oil industry regulating bodies such as the NPDES(National Pollutant Discharge Elimination System) in the US have strict ppm limits that are coupled with costly fines for non-compliance. On-shore industrial wastewater producers also have limits imposed either by the ...
-
On-Site Measurement of Oil/Grease in Wastewater Helps Ensure Compliance with Discharge Permits
Determining total oil/grease levels in wastewater for compliance with governmental regulatory discharge permits is a worldwide problem facing numerous industries including chemical, oil and gas, biofuels, and other industrial manufacturing plants. To ensure compliance with discharge regulations and avoid fines for exceeding permit levels, more frequent wastewater measurements are necessary to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you