District Heating Water Equipment For Water And Wastewater Near Egypt
-
Manufactured by Treat Ment CFSbased in ISRAEL
Weakly acidic cation exchanger. Through dealkalization the hardness and the bicarbonate content of the water are reduced, thus typically reducing the salt content in the water by approximately 75%. Used for production of boiler water and district heating water as well as process water in breweries and Greenhouses . Flow rates for standard modules: 1-50 m³/h. The plants are manufactured as ...
-
Manufactured by Jeotesbased in TURKEY
The accumulator tank, boiler, dirty separator, air eliminator, balance tank for heating systems and buffer tanks for cooling systems are mainly needed for district heating, cooling and hot water in leisure centers such as sports centers, malls and swimming pools, in military facilities, dormitories, apartments and mass ...
-
Manufactured by MTA Messtechnik GmbHbased in AUSTRIA
“WCS - Water Control Systems” is a modular remote monitoring system for water supply systems, sewage, wastewater treatment plants, district heating plants and the environmental industry recording dynamical values and static state inquiries. Metering data and graphs can be monitored in real time, where e.g. water loss analyses in a water supply network are carried out (flow meter data ...
-
Manufactured by U-FLO Groupbased in USA
FH Series – Horizontal End Suction Centrifugal Pump. This is a single-stage with end suction non self-priming centrifugal pump. The rated power and dimensions of pump comply with EN733 Standard. The replaceable shaft sleeve is applied in shaft seal area. The replaceable wearing ring is applied between volute casing and impeller. Pump casing and base is constructed with a single casting. ...
-
Manufactured by U-FLO Groupbased in USA
FHC series – End Suction with Direct Coupled Centrifugal Pump. This is a single stage, end suction centrifugal pumps. The motor is directly coupled with pump shaft. The rated power and dimension comply with EN733 Standard. The replaceable shaft sleeve is applied in shaft seal area. The replaceable wearing ring is applied between volute casing and impeller. Pump casing and base is ...
-
Manufactured by Brandoni spabased in ITALY
Series B1 consists of wafer-ball-type shut-off valves, with the body in cast iron and a floating ball, manufactured in accor- dance with the severe product standards and the quality management of ISO ...
-
Manufactured by Systec Controls Mess- und Regeltechnik GmbHbased in GERMANY
Precise and simple does not mean any contradiction for deltawaveC-F. deltawaveC-F is extremely easy to handle. The user interface of the large graphical display is easy to use even by inexperienced users. With the new quick setup option, your flow measurement can be set up in less than a minute. Online help-texts make the use of the printed manual unnecessary for the majority of your daily tasks. ...
-
Manufactured by KORN GmbHbased in GERMANY
DEMKOR protects your aluminium hot water boiler and your piping system. KORN offers an integrated solution for the safe and efficient operation of hot water systems with aluminium heat exchangers and connected piping systems made of steel and other non-ferrous metals. Until now, the focus has always been on protecting the supposedly most expensive component of a hot water system: the aluminium ...
-
Manufactured by Dejong Gorredijk BVbased in NETHERLANDS
Indirectly heated vertical hot water tanks are among other things applied in combination with gas, oil and pellet fired boilers and for district heating. The hot water tanks are made of high grade stainless steel and have a long lifetime. The diabolo-shaped heating coil enables an efficient heat exchange and a quick reheat time. As a result, a large capacity of hot water is supplied for an ...
-
Manufactured by Dejong Gorredijk BVbased in NETHERLANDS
Indirectly heated vertical hot water tanks are among other things applied in combination with gas, oil and pellet fired boilers and for district heating. The hot water tanks are made of high grade stainless steel and have a long lifetime. The diabolo-shaped heating coil enables an efficient heat exchange and a quick reheat time. As a result, a large capacity of hot water is supplied for an ...
-
Manufactured by Consibio Apsbased in DENMARK
Sensor-agnostic dataloggers for monitoring in environmental applications, ensuring flexibility and precision. ...
-
Manufactured by Metrima ABbased in SWEDEN
Metrima provides complete solutions for meter data collection for electricity, district heat, water, gas and other types of energy. Our systems are used for the daily collection of 600'000 meters in Sweden, including 60'000 heat and water ...
-
based in FINLAND
We have patented a self-cleaning water filtration technology that takes microfiltration to the next level. This new technology is commercialised through our new system, Sofi ...
-
Manufactured by Envibat Systems ABbased in SWEDEN
Flue gas condensation is a proven process for maximizing energy output from damp or hydrogen-rich fuels. By burning of biomass, peat, waste or natural gas, flue gas contains a high proportion of water vapor. Water vapor condenses through cooling of flue gas with the return of district heat. The heat energy released during condensation is thereby transferred to the district heating water. The flue ...
-
Manufactured by CPV Ltdbased in UNITED KINGDOM
A pre-insulated rigid steel pipe system for district heating, cooling and special applications. A rigid, bonded pre-insulated steel pipe system in accordance with EN253. Suitable for district heating, cooling and special applications and temperatures up to 130°C continuous. Available in metric and imperial sizes – from 20mm to 1200mm NB, supplied in 6 and 12 metre lengths with an ...
-
Manufactured by CPV Ltdbased in UNITED KINGDOM
A pre-insulated pipe system for district heating, cooling and potable water applications. Hiline Aqua is a rigid, pre-insulated polymer pipe system specifically developed for the next generation of district heating, cooling and hot water service networks. Whether it’s for a simple connection between two buildings or a large-scale network, it offers outstanding thermal performance coupled ...
-
Manufactured by Seetru Limitedbased in UNITED KINGDOM
THE SEETRU LGS™ MULTI-PURPOSE SAFETY VALVE RANGE | PURCHASE ONLINE USING OUR 'SAME DAY DESPATCH' SERVICE | SUITABLE REPLACEMENT FOR THE NABIC 542 & BAILEY 707. The LGS™ Valve range represents state-of-the-art design with dual guided spindle as well as the Seetru Rock-Seal™ seal technology for repeatable high performance sealing. It is a high quality valve of modular design and construction ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc Tobee® FP40-400.12 Fan Pump Exchange Unit / FP40-400.12 Rotor Unit is 100% interchangeable with original Andritz FP40-400.12 Fan Pump, Th FP40-400.12 Exchange Unit made from duplex stainless steel 1.4460. ANDRITZ FP Series Fan Pump is a low pulse and high efficient paper pulp pump, It ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc Wear Ring for Andritz FP40-400 343/309x62 1.4460 pos 502 PN131104718. ANDRITZ FP Series Fan Pump is a low pulse and high efficient paper pulp pump, It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc The 1.4460 Wear Ring Pos.502 / SAP-No. 131104718 is used for Andritz FP series Pump FP40-400. ANDRITZ FP Series Fan Pump is a low pulse and high efficient paper pulp pump, It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you