Ditch Maintenance Equipment For Water And Wastewater Available In Mississippi
-
ShowcaseManufactured by Landustrie Sneek BVbased in NETHERLANDS
The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: square or rectangular tanks, round tanks, shallow or deep ...
-
ShowcaseManufactured by Texas Boom Company LLCbased in USA
Type I turbidity curtains (also commonly referred to as Type 1 and silt curtains) are intended to control sediment and runoff in calm waters. These turbidity curtains are built with foam-filled floats that are referred to as Freeboards, combined with skirts that typically range in height from 3 to 20 feet. These floating silt curtains impede the flow of silt or sediment that may be suspended in ...
-
PremiumManufactured by TRIC Tools, Inc.based in USA
Connectra’s 28CQ fusion welding machine is optimized for small spaces, whether on a piperack, in a ditch, or other locations where space is at a minimum. Training and operation are quick and easy thanks to its straightforward build, and the 28CQ’s durable and quiet facer motor can manage any project. This heavy-duty design is purposed for fusing PE pipes, ells, tees, and other ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
RBC flumes are used to measure the quantity of water that, for instance, flows through an irrigation channel. By comparison to known flumes, such as the WSC- and the Parshall flume, the RBC flume is the most accurate. The RBC flume has been specially designed for use in smaller water ways or earthen channels (irrigation channels, in- outlets, furrow, ditches, etc.). The RBC flume is a simple and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The mini current meter with one aluminium propeller is used in small ditches, with low water levels. Measuring range 0.03 to 2.5 m/sec. The instrument is included in a complete set. ...
-
PremiumManufactured by Texas Boom Company LLCbased in USA
This "Mini-Boom" oil spill containment boom is 6 inches total height, with 2 inch float (freeboard) height and 4 inch skirt draft. This size oil spill boom does not offer a top tension cable. This boom is typically used in still waters with little wind exposure. This oil spill boom may be suitable for use in ponds, ditches, bayous, swamps and other protected waters. 50 foot and 100 foot sections ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
In order to meet high requirements for flexibility, capability, operational reliability, operating costs and the environmental demands of minimal noise and aerosol generation, Landustrie developed the Landox channel aeration ...
-
PremiumManufactured by TRIC Tools, Inc.based in USA
The McElroy PitBull® 26 model fusion welding machine is purposed for not only fusing 2” IPS to 6” DIPS polyethylene pipes but also ells, tees, and additional fittings. When using the machine to fuse pipes made from other thermoplastic materials, consult the fusion procedures listed by the pipe manufacturer for the correct joining ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Easy Ride is a grid made out of recycled plastic that is ecocompatible and UV ray stabilised, which makes it possible to improve and stabilise surfaces crossed by animals, also large ones, preserving mobility and safeguarding the general hygiene of their living environment. Easy Ride, thanks to its elasticity and stability, is particularly suited to the field of horse riding because it prevents ...
-
PremiumManufactured by Atlantis International Corporation Pty Ltd.based in AUSTRALIA
Atlantis® Flo-Pipe® and Flo-Log® Infiltration Plates and Tubes are pre-wrapped in quality geotextile and are available in various sizes. They can be connected to each other to create any length. * Custom sizes available upon request. ...
-
PremiumManufactured by Texas Boom Company LLCbased in USA
This oil spill containment boom is 10 inches total height, with 4 inch float (freeboard) height and 6 inch skirt draft. This size oil spill boom can be made with or without a top tension cable. This boom is typically used in calm waters with limited wind exposure. This oil spill boom is suitable for use in ponds, lakes, canals, streams, ditches, bayous, swamps and other protected waters. 50 foot ...
-
PremiumManufactured by TRIC Tools, Inc.based in USA
The Connectra 14M Butt Fusion System quickly and accurately handles polyethylene pipes, from ¾” CTS to 4” DIPS, as well as valves and fittings. Snap liners allow clamps to work with smaller pipes. The heater, faces, and joining assembly operate on or off-cart or unplugged in the ditch while maintaining proper temperatures. The fusion welding machine features a semi-automatic ...
-
Manufactured by Genesis Biosciences, LLCbased in USA
Evozyme Bio-Brick is a slow dissolve, bacterial-laden solid for use in degrading organic waste in grease ...
-
Manufactured by Bomford Turner Ltdbased in UNITED KINGDOM
The Bomford Ditch Cleaner head is both compact, powerful and capable of operating in wet or dry conditions. The Bomford Ditch cleaner can be turned through 90 degrees and used to clean existing roadside 'grips' and can be changed from left to right operation in minutes with a choice of blades or cutting teeth. The ditch cleaner head comprises of a 660mm diameter rotary cutting head, that is ...
-
Manufactured by Shandong Buoy & Pipe Industry Co.,LTDbased in CHINA
UHMWPE pipes is flexible and can be easily placed along with terrain of pipe ditch. It is widely used in water projects in subsidence zone, hilly area, desert, and earthquake-prone areas, solving problems of poor adaptability, being easily damaged by subsidence of earth, weak aseismatic ability for PCCP pipes, steel pipe, FRP pipes. ...
-
Manufactured by Feicheng Boyuan Geotextile Material Co., Ltdbased in CHINA
Plastic blind ditch is a three-dimensional porous material made of thermoplastic synthetic resin heated. Thermoplastic synthetic resin is melted and extruded into filaments by nozzles. These filaments are then folded and welded together to form plastic blind ditches. There are many types of plastic blind ditch, such as rectangle, hollow rectangle, circular hollow circle and so ...
-
Manufactured by ADSORBITbased in USA
ADsorb-it fabric floating curtain boom 21" deep by 10' long. For use on any body of water to remove oil from the surface and subsurface. Hook multiple units together to reach any desired ...
-
Manufactured by engcon Nordic ABbased in SWEDEN
engcon’s cable bucket – developed for precision excavation with minimal width for e.g. cables or other services requiring narrow trenches. Its deep profile means better accessibility beneath intersecting cables and pipes and also allows deep trenching without the need for the tiltrotator to go below surface ...
-
Manufactured by North American Implements (NAI)based in USA
The Heavy Duty Backhoe Boom is an excellent attachment for digging footings, ditches and stump removal. This unit allows you to turn your skid steer into a mini backhoe. Durable powder coat finish. Flat face fittings, factory installed and included. 7 ft. digging depth and 14,000 ft lbs. ripping force. Optional manual thumb (PT# 10220000). 1.25 inch pins and countersunk grease fittings at all ...
-
Manufactured by Rototilt Group ABbased in SWEDEN
To excavate narrow trenches, pipe culverts or drainage ditches you need a bespoke trenching bucket. Our trenching bucket has a smooth, solid design, providing sensitive and safe excavation geometry. This is especially important when the margins are narrow and high precision is demanded. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you