Only show results in Virginia? Ok

Drain Pipe Equipment

  • Polieco - Model Drenosewer - Twin Layer Drainage Pipe

    DRENOSEWER a slotted polyethylene pipe, with a corrugated external wall and a smooth internal wall. It is available in coils of the diameters range between OD.110 and OD.200. It has a resistance to compression higher than 450N, with a deformation of the external diameter equal to 5%. If is offered in two slotting versions: 360° (disposed on ...

    By Industrie Polieco-Mpb srl based in Cazzago S., ITALY. from Drainages Product line

  • HS - Model 12 kN/m² - Underground Drainage Pipe System

    The HS-Underground Drainage Pipe System ≥ 12 kN/m² DN/OD 110 - 800, including a complete wall-reinforced drainage fittings programme (SDR 34) in nominal widths DN/OD 110 - 200 was specially designed for the house connection sector. Among its advantages: high stability, high safety and easy installation. Pipes of such diameters are ...

    By Funke Kunststoffe GmbH based in Hamm-Uentrop, GERMANY. from Pipe System Product line

  • Geochem - Drainage Pipes

    GEOCHEM ENGINEERING offers special corrugated, double walled and perforated Drainage pipes, suitable for both Civil Engineering and agricultural applications. The offered types come in different outer diameters and optionally in rigid form and wrapped with filter geotextile.

    By Geochem Engineering SA based in Koropi, GREECE. from Drainage Pipes Product line

  • Raing Drain Pipe-3

    Raking drain pipe is widely used in slope reinforcement system by Hongkong Civil Engineering and Development Department. The design is come from Japan, made by Japanese Quality Control System factory SPL, all the products match the SGS quality system.

    By Sunfeel Pacific Ltd. based in CHINA.

  • BOSS - Model 2000 - Corrugated HDPE Drainage Pipe

    BOSS 2000 is a dual-wall corrugated HDPE drainage pipe with a smooth inner wall to offer superior hydraulic performance for both storm sewers and culvert applications, ranging from diameters of 100mm to 900mm.

    By Armtec based in Concord, ONTARIO (CANADA). from Pipe & Culverts Product line

  • Model PE - Domestic Drainage Pipes / Bridge Draining

    Domestic drainage pipes made of PE are used as a connection between the roof drainage and the sewer or the rainwater drainage system.

    By HakaGerodur based in Gossau SG, SWITZERLAND. from Piping Systems Product line

  • Blobel - Model Type BL/TKN - transport Cart

    Suitable for the transport of channel inflow covers with the pin system (mobile system, BL/KMS types) up to 100 kg. The transport cart features a rounded pipe design and solid rubber tires. Rotating receiving sleeves are located on the front side of the cart for the lifting and safe transport of special channel inflow covers. These sleeves can be ...

    By Blobel Umwelttechnik GmbH based in Gersthofen, GERMANY. from Storm Water Drain Covers Product line

  • Black Steel Pipes

    Black steel: Black iron is the uncoated steel and is also called as black steel. When steel pipe is forged, a black oxide scale forms on its surface to give it the finish which is seen on this type of pipe. Because steel is subject to rust and corrosion, the factory also coats it with protective oil. Those black steel are used for manufacturing ...

    By Hunan Great Steel Pipe Co., Ltd. based in Changsha City, CHINA. from Galvanized Steel Pipe Product line

  • TRIC - Model M100 - Pulling System - Hydraulic Pump

    The TRIC formula puts big power in a small footprint, and the M100 is the most formidable example of that formula. Projects with tough ground conditions or limited access are natural candidates for the M100. This unit is designed to burst 8” to 12” municipal sewers as well as other drains and utility lines.* The M100 can be powered by ...

    By TRIC Tools Inc. based in Alameda, CALIFORNIA (USA). from Pipe Bursting Equipment - Pulling Units Product line

  • Pinpointer - Model PP3000 - Drain Tracer Kit

    The Wardsflex PP3000 Pinpointer system is typically used for tracing underground clay, brick or plastic drains, sewers, ducts and culverts (not suitable for cast Iron, Ductile Iron or Steel Pipes).

    By Wardsflex based in Mildenhall, UNITED KINGDOM. from Drain Tracing Product line

  • Denlok Jacking Pipes

    For a company with its origins in clay drainage pipes and over 100 years of experience in the manufacture of clay drainage pipes and fittings, it is natural that Naylor Drainage Ltd is at the forefront of product development and innovation. With worldwide operational activities, Naylor Drainage is the world’s leading international supplier ...

    By Naylor Drainage Ltd. based in Cawthorne, UNITED KINGDOM. from Clay Drainage Product line

  • Polieco - Model Polidren - Twin Layer Drainage Pipe

    POLIDREN is a slotted polyethylene pipe, with a corrugated external wall and a smooth internal wall. It is available in coils for the diameters range between OD.63 and OD.200.It has a resistance to compression higher than 300N, with a deformation of the external diameter equal to 5%.Slots are disposed on the whole circumference, every 120° for ...

    By Industrie Polieco-Mpb srl based in Cazzago S., ITALY. from Drainages Product line

  • Sewer and Drain Pipe Programme PE

    In the sewage construction an important and usage oriented innovation is emerging with the moulded fit-tings made of polyethylene (PE). Now, complete sewage pipelines made of polyethylene can be prepared with this new programme. This omits the time consuming and expensive individual constructions and is re-placed with more efficient and cost ...

    By HakaGerodur based in Gossau SG, SWITZERLAND. from Piping Systems Product line

  • BOSS - Model 1000 - Corrugated HDPE Drainage Pipe

    BOSS 1000 is a single-wall corrugated HDPE drainage pipe with a unique corrugation profile that offers longitudinal flexibility and interior roughness. The inherent flexibility makes it ideal for “snaking” around obstructions or conforming to steepened slopes. The corrugated interior helps to control discharge velocities and reduces ...

    By Armtec based in Concord, ONTARIO (CANADA). from Pipe & Culverts Product line

  • COEX 2000 - KG-Drainage Pipe System

    COEX 2000 underground pipes, Funke system, produced by a coextrusion process are suitable for the drainage of domestic and industrial waste waters outside buildings from DN/OD 110 to DN/OD 500 incl. all underground fitting parts.

    By Funke Kunststoffe GmbH based in Hamm-Uentrop, GERMANY. from Pipe System Product line

  • Connex - Model DN/OD 315 - 800 - Underground Drainage Pipe System

    The CONNEX DN/OD 315 - 800 underground pipe including a complete range of moulded parts provides customers and civil engineering companies with a real alternative for traditional pipe materials in the sewage water sector. With installation depths of 0.8 to 6.0 m and an installation according to DIN EN 1610. SLW 60 will be reached (SDR 34, SN 8).

    By Funke Kunststoffe GmbH based in Hamm-Uentrop, GERMANY. from Pipe System Product line

  • Funke EBR-System - Pipe System

    Under the Funke EBR-System label, Funke Kunststoffe GmbH has launched a new pipe system onto the market that has been developed for the drainage of railway facilities. These PVC-U solid wall pipes are a modified mixture of manufactured pipes that meet the requirements of DBS 918 064 (Deutsche Bahn Standard) and which can be used in the outer ...

    By Funke Kunststoffe GmbH based in Hamm-Uentrop, GERMANY. from Pipe System Product line

  • Model BN 82 L=6 P/E - Plasti Drain Pipe

    Main Dimension82 mm.Main MaterialPVC-U.ColourBrown.Volume44 dm³.Weight7.332 kg.List Price£ 105.42.Pack Qty1 pce.Packaging1 piece = 6 meters.1 bag = 91 pieces.1 pack = 163 pieces.Min Qty1 pce

    By Hepworth Building Products based in Sheffield, UNITED KINGDOM. from PlastiDrain Drainage System Product line

  • Corrugated Polyethylene Pipe for Drainage

    Corrugated polyethylene pipe for drainage with double - wall, Polidren, ensure: durability, tightness, low costs, easy installation, minimal maintenance.

    By TehnoWorld based in Suceava, ROMANIA. from Sewerage and Drainage Systems Product line

  • PVC/HDPE Drainage Pipes

    PVC and HDPE pipes, slotted and micro- slotted, for systems of drainage and/or irrigation under ground. This range is completed by PVC pipes for piezometric research and valved pipes for consolidation. We are able to reply to whatever requirement regarding the width of the slots, the number of matrixes and the height of the pipes.

    By LA.RE.TER. s.p.a. based in Fiesso Umbertiano (ROVIGO), ITALY. from Pipes Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you