Dredge Dewatering Equipment For Water And Wastewater Available In Senegal
-
PremiumManufactured by Texas Boom Company LLCbased in USA
Texas Boom Pipe & Hose Floats are the ideal solution for dredging, mining, dewatering, pumping and other industrial projects. Pipe Floats are available to fit a pipeline from 2 inches (51 mm) to 48 inches (1219.2mm) diameter. Pipe floats also function as hose floats and can fit the same diameter hoses. ...
-
Manufactured by Cangzhou Haihua Steel Pipe Co.,Ltdbased in CHINA
The dredging pipe is is a larg scal tube to remove material (sludge, mud, sand, sediment and toxins) from the bottom of lakes, rivers, lagoons, ponds and other bodies of water. The dredging pipe we offered is made from the material such as 10#,20#,45#,Q235,Q345, St37,ASTM A53 Gr.A or Gr.B,API 5L Gr.A with diameter from 110 to 1000mm. This dredging pipe is widely used in waterways, pond dredging, ...
-
Manufactured by Shijiazhuang Hedun Pump Company Ltdbased in CHINA
Large particles, most difficult higher abrasive slurry can use this horizontal gravel pump. Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. They are designed to handle very large particles for gravel and dredging operations, could continuously handle the most difficult higher abrasive slurry, containing solids too large to be pumped by a ...
-
Manufactured by Dongying Sinco Pipe Industries Co.,Ltdbased in CHINA
HDPE Dredging Pipe floaters/Floats are made of rotationally molded polyethylene with UV inhibitors to prevent degradation of the floats over time. SINCO HDPE Dredging pipe and floats are perfect solutions for dredging works, dewatering, pumping and other industrial ...
-
Manufactured by PHOENIX Process Equipment Co.based in USA
PHOENIX is the exclusive North American distributor for the SCI Horizontal Decanter Centrifuge for continuous liquid-solid separation through centrifugal sedimentation and decanting. Providing a compact and efficient dewatering solution, SCI centrifuges are applied in a wide range of dewatering and separation processes across multiple ...
-
Manufactured by DEL Corporationbased in USA
DEL’S patented Total Clean System is the most valuable component of any dredge dewatering project besides the dredge itself. On most dredging projects the Total Clean System will remove and dewater 60% or more of the dredged material and at a cost much less than any other dewatering method. The Total Clean will receive the initial flow directly from the dredge and remove all the oversize ...
-
Manufactured by FD Petrol Drilling Waste Managementbased in CHINA
Drilling mud solids control system not only applicable for oil and gas drilling mud solids liquids separation, but also for HDD,CBM,no-dig pipeline construction ,dredging slurry separation, civil and underground project, it is the best equipment for drilling fluids recovery and environmental separation. ...
-
Manufactured by DEL Corporationbased in USA
The DELineator, 3 and 4 Panel Linear motion shale shakers meet the needs of solids separation in a large number of different industries. To name a few, Drilling, (whether it be used in Oil and Gas as a primary or drying shaker, Water Well, or HDD), Dredging, Mining and Dewatering for waste disposal. Our success in separating unwanted solids from fluids, as well as reclaiming valuable solids ...
-
by Spinprobased in USA
Billions of cubic yards/meters of sediment are dredged each year. Remediation and construction projects in and around waterways and process ponds present numerous challenges in sediment removal, dewatering and disposal. Environmental dredging involves a highly controlled removal process, with efforts focused on minimizing the removal of clean material while effectively removing and controlling ...
-
Manufactured by PHOENIX Process Equipment Co.based in USA
PHOENIX Process Equipment Co. is the U.S. technology for KISA GmbH and the PHOENIX/KISA Bucket Wheel, designed for the capture, de-sliming, and dewatering of sand and gravel slurries. Bucekt Wheels processing up to 1300 stph sand capacity each are available. These machines are uniquely designed for solids recoveries of 99%+, even from dilute slurries such as dredger spoil, with low power ...
-
Manufactured by GN SOLIDS CONTROLbased in CHINA
Drilling Fluid System GN manufacture Fluid Processing System mainly used for: Oil & Gas Drilling-Drilling Fluid Circulation System HDD & Underground-Drilling Mud Recycling System Mining & Dredged- Fluid / Slurry Separation System GN Drilling Fluid Systems are widely used for Oil Gas drilling fluid circulation,Horizontal directional drilling fluid recycling,geothermal drilling,mining,coal ...
-
Manufactured by Triflo International Inc.based in USA
The Triflo Model 2000DSSSR has been designed specifically to accept feed directly from the dredge at a maximum rate of 2000 gpm, Triflo’s unique self contained solid removal technology separates solids from dredged slurry via a three stage system down to 25 um. In addition, the solids that are removed are dewatered to a stackable “pass paint filter” state, which can be readily ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Elgin Separation Solutions manufactures effective solid recycling systems capable of handling high flow capacity for dredge dewatering operations. On-board linear motion shakers have the largest screening surface area on the market. In addition, systems have complete desilter and desander hydrocyclone manifolds incorporated into packaged trailer mounted systems making for an ideal mobile dredge ...
-
Manufactured by Scanmudring ASbased in NORWAY
The Standalone dredge's ejector system is identical to the successful system used on the Scanmachine, which is pre-rigged on a certified lifting frame. The Standalone dredge solution offers real versatility, making it suitable for operations fewer limited requirements in terms of dredging tolerances (high tolerances would always favourize the subsea excavator configured with the subsea navigation ...
-
Manufactured by DEL Corporationbased in USA
DEL has designed a versatile and mobile Clarifier & Thickener to handle the higher flow rates required by many dredging and dewatering projects with a total working capacity of 45,000 gallons. The tank is built in 2 sections, an upper and lower section, for ease of transport. The tank requires only 2 flat bed trucks and width permits for hauling. The flange joining the 2 sections together ...
-
Manufactured by ASDR Canadabased in CANADA
ASDR’s water treatment expertise was largely built on its ability to deliver modular solutions to clients quickly and efficiently. Our line of “plug and play”, containerized water treatment units can meet your requirements for emergencies, and temporary or long-term needs. Many of our units have been operating on sites for more than 10 years, which is a testimony of their ...
-
Manufactured by Flint Industriesbased in USA
TITANTube® geotextile tubes, sometimes referred to as geotubes, are large tubes (ranging from dumpster size to 120′ circumference or larger) used for coastal protection, containment and sludge/sediment dewatering. Flint’s TITANTube® design maximizes operational strength, UV stability, and interface friction. Our TITANTube® dewatering tubes have the highest water flow rate ...
-
Manufactured by Elgin Separation Solutionsbased in USA
All Elgin profiles are cold shaped to exacting tolerances for width, height, relief, hardness and tensile. Nothing less than our rigid standards are acceptable during the shaping ...
-
Manufactured by Glikr Machinery Co., Ltd.based in CHINA
Built with high-strength, light structural steel and heavy duty components, GLIKR long arm excavator booms are used in a versatile range of applications. Including marine construction, surface mining, slope stabilization, demolition of buildings and structures, and other specialist works where maximum reach, height and depth is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you