Environmental Industry Equipment Available In Solomon Islands
-
ShowcaseManufactured by FG Pumpsbased in ITALY
FGM Series is a mechanically actuated diaphragm metering pump. FGM series are built following high quality standard. Safe and leak free operations, FGMV series have an output shaft to connect to a stirrer. Possibility to stop the flowrate keeping the stirrer in operation. The pump can be installed on a tank to mixer and dose the products at the same ...
-
ShowcaseManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Economical Shredder is a double-shaft shredder. Two shafts with special-shaped knives rotate in the shredding chamber. By the action of tearing, shearing, and squeezing caused by knives and counter-plate, material is shredded into smaller pieces, which makes the later treatment or transportation easier and more ...
-
ShowcaseManufactured by BBA Pumps BVbased in NETHERLANDS
The electric BA180KS is an 8-inch sewage pump and equipped with a priming system. With the unique screw channel impeller, it allows you to pump wastewater with large solids and long fibrous materials. You can choose from a stackable frame or a sound attenuated canopy. We can install a soft starter or a variable frequency drive in the lockable compartment. The control panel features automatic ...
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
In the process of treating waste water, fine biological sludge is constantly produced during the decomposition process at a sewage treatment plant. For a stable decomposition process in the biological treatment phase, the sludge produced in the secondary sedimentation pond, also known as excess sludge, is removed and fed into the digestion tower. Flottweg's OSE decanters thicken the sludge before ...
-
ShowcaseManufactured by Toro Equipment S.L.based in SPAIN
Complete automaton sludge dewatering cycle. It has an automatic cake shaking system. Maximum filtering surface 1.5m² to 132.3m². Number of plates: 5 to 35. Plate size: from 470mm to ...
-
ShowcaseManufactured by InterOcean Systems LLCbased in USA
The Slick Sleuth® SS100 is designed for installation in above ground storage tank (AST) facilities, oil terminals, equipment rooms, or anywhere early oil leak and spill detection is needed. Detects a broad range of oil types on water and on dry ground-including spills, slicks, and sheen in tank dikes, sumps, oily water separators, mixing/dispatch points, loading racks, and storm water ...
-
ShowcaseManufactured by ESCO International (EI)based in UNITED KINGDOM
The skid mounted ozone generator systems are specifically designed and manufactured to meet the disinfection and sanitization requirements for controlled water quality standards for various industries, such as: bottling and rinsing plants, food and beverage industries, pharmaceutical and chemical processes, ultra pure water in electronic and pharmaceutical sectors, swimming pools and hot water ...
-
ShowcaseManufactured by Randolph Austin Companybased in USA
Available for OEM applications, the TP 4000 pump is mounted directly to a 24 VDC motor. Available with either 100, 170, or 280 rpm motors the SETP-4000 pump model is an excellent choice for dependable OEM applications. The pump utilizes either a 1/4″ or 5/16″ ID tubing with a 3/32″ wall and can also be ordered with a high performance DC ...
-
ShowcaseManufactured by Toro Equipment S.L.based in SPAIN
Containerizing Draco press filter equipment: Compact assembly of our equipment, assembled in a 20´DV or 40´HC container, depending on the size of the equipment that it ...
-
ShowcaseManufactured by MSE Filterpressen GmbHbased in GERMANY
At first, fully automatic filter presses differ significantly from conventional filter presses. The basic architecture, the working principle and process technology are identical. Fully automatic filter presses are specifically designed for applications in which a continuous operation and fast cycle times are essential and therefore crucial. MSE fully automatic filter presses provide a high ...
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Covering everything from the technology of particle counting, to the regulatory standards that apply to the pharmaceutical manufacturing industry, to the instrumentation and techniques needed to meet them. This premier handbook helps readers understand the topic of environmental monitoring more holistically and more extensively. With the release of the much-anticipated EU GMP Annex 1 2022 ...
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita Dropwise Condensation Technology is a patent pending technology to increase operating efficiency and conserve energy in industrial production facilities. This technology can be applied without apploying any additional system equipment. The KURITA DW product is dosed continuously into the steam line in front of the target device creating a water repellent film on the surfaces. Increasing ...
-
ShowcaseManufactured by Lumex Instrumentsbased in CANADA
The mercury analyzer RA-915M is a unique all-purpose high sensitivity analytical instrument for measuring mercury, especially for the real time detection of mercury vapor in air, mercury detection in water, natural and stack gases, oil and condensate, solid and sediments, foodstuff and so ...
-
ShowcaseManufactured by Advanced Equipment and Services, Incbased in USA
Specifications: 3 membranes 4x40. 7.5 HP stainless steel RO pump. Weight: 420 lbs. (191kg). Size: 36x19x71 inch. (91x48x180 cm). 3/4” feed connection. 1/2” product connection. 3/4” reject ...
-
ShowcaseManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Highly accurate yet easy to use: With the ML3 ThetaProbe Soil Moisture Sensor it’s easy to make reliable, accurate soil moisture measurements. Simply insert the soil moisture probe into the soil, connect to your data logger or readout unit, provide 5-14 V DC at 18 mA, and within seconds you can be logging soil moisture. The ML3 ThetaProbe is robust, buriable and maintenance free ...
-
ShowcaseManufactured by BPC Instruments ABbased in SWEDEN
Market-leading analytical tool for anaerobic batch fermentation testing. The Automatic Methane Potential Test System (AMPTS®) is the market-leading analytical tool for anaerobic batch fermentation testing. Now on its third generation, AMPTS III is automated and fully integrated for easy access to sampling, analysis, recording and report generation. AMPTS III houses 18 glass reactors for tests ...
-
ShowcaseManufactured by BD|SENSORS GmbHbased in GERMANY
The process pressure transmitter XMP i has been especially designed for the process industry and measures vacuum, gauge and absolute pressure ranges of gases, steam, fluids and dust up to 600 bar. Different process connections such as threads and flanges with an internal or flush welded diaphragm are available and can be combined with a cooling element for media temperatures up to 300°C. ...
-
ShowcaseManufactured by Harden Machinery Ltd.based in CHINA
Harden QS Series four shaft shredder has intelligent control system for each of shaft, which enables each shaft working with their own shredding and protection actions to increase the shredding frequency and output. Harden QS Series equipped hydraulic and electric motor combine driven system, which remains benefits, high torque and flexible control for main shaft, high efficiency and energy ...
-
ShowcaseManufactured by Chromatotec Groupbased in FRANCE
Due to the large number of Volatile Organic Compounds (VOCs), there is a need to combine their separation and quantification by Gas Chromatography (GC) with Flame Ionization Detection (FID) and their individual identification by Mass Spectrometry ...
-
ShowcaseManufactured by Cerex Monitoring Solutions, LLC.based in USA
Measurements: The UV Sentry is a parts per billion (ppb) to percent level chemical detection and quantification open-path UV-DOAS analyzer. It offers high-performing, time-resolved monitoring of a variety of regulated ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you