surface contaminant Articles
-
Evaluation of total particulate matter emission factors for copper slag in dry abrasive blasting
Abrasive blasting was performed in enclosed conditions to evaluate the effect of blast pressure, feed rate and surface contamination on Total Particulate Matter (TPM) emission factors for copper slag. Stack sampling methods were used to collect uncontrolled TPM. Emission factors were calculated as grams of TPM emitted per pound of copper slag used (g/lb) and grams of TPM emitted per square foot ...
-
Surface Decontamination of Arsenic Compounds (Arsenic Trioxide (As2O3)) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGelTM 1101 on stainless steel, carbon steel, and concrete surfaces contaminated with arsenic (arsenic trioxide (As2O3)) was performed using ICP-OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) according to Environmental Protection Agency (EPA) SW-846 Methods: 3005A (sampling) and 6010C (analysis). Hazardous Materials ...
-
Surface Decontamination of Nickel Compounds (Nickel Nitrate (Ni(NO3)2)) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGel™ 1101 on stainless steel, carbon steel, and concrete surfaces contaminated with nickel nitrate (Ni(N03)2) was performed with ICP-OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) according to Environmental Protection Agency (EPA) SW-846 Methods: 3005A (sampling) and 6010C (analysis). Hazardous Materials ...
-
Large eddy simulation modelling of the dispersion of radioactive particulate matter
Field experiments with a Radioactive Dispersion Device (RDD) were performed by the National Radiation Protection Institute (NRPI) of the Czech Republic. We present the results of computer simulations of these experiments using a new microscale model, Charles University Large Eddy Microscale Model (CLMM). The model was first validated using wind tunnel data for the dispersion of continuous passive ...
-
Surface Decontamination of Selenium Compounds (Selenium powder) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGel™ 1101 on stainless steel, carbon steel, and concrete surfaces contaminated with Selenium powder was performed with ICP-OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) according to Environmental Protection Agency (EPA) SW-846 Methods: 3005A (sampling) and 6010C (analysis). Hazardous Materials Relevance ...
-
Surface Decontamination of Iodine Compounds (Potassium Iodide (KI)) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGel™ 1101 on stainless steel, carbon steel, floor tile, and concrete surfaces contaminated with potassium iodide (Kl) was performed with ICP-OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) according to Environmental Protection Agency (EPA) SW-846 Methods: 3005A (sampling) and 6010C (analysis). Hazardous ...
-
Surface Decontamination of Iron Compounds (Iron (II) Chloride (FeCl2)) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGel™ 1101 on stainless steel, carbon steel, aluminum and concrete surfaces contaminated with Iron (II) Chloride (FeCI2) was performed with ICP-OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) according to Environmental Protection Agency (EPA) SW-846 Methods: 3005A (sampling) and 6010C (analysis). Hazardous ...
-
Surface Decontamination of Aldehydes (Glutaraldehyde) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGelTM 1101 on stainless steel, aluminum, and concrete surfaces contaminated with aldehydes (glutaraldehyde) was performed using GC/MS (Gas Chromatography/Mass Spectrometry) according to Environmental Protection Agency (EPA) SW-846 Methods: 3500C (Sampling) and 8270C (Analysis). Hazardous Materials Relevance Glutaraldehyde is a ...
-
Surface Decontamination of Pesticides (DDT) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGel™ 1101 on stainless steel, carbon steel, and concrete surfaces contaminated with Pesticides (dichlorodiphenyltrichloroethane (DDT)) was performed with LC/MS (Liquid Chromatography/Mass Spectrometry) according to Environmental Protection Agency (EPA) SW-846 Methods: 3500C (sampling) and 8321B (analysis). Hazardous Materials ...
-
Surface Decontamination of Alkaloids (Nicotine) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGelTM 1101 on stainless steel, aluminum, and concrete surfaces contaminated with alkaloids (nicotine) was performed using LC/MS (Liquid Chromatography/Mass Spectrometry) according to Environmental Protection Agency (EPA) SW-846 Methods: 3500C (Sampling) and 8321B (Analysis). Hazardous Materials Relevance Nicotine is an aromatic ...
-
Surface Decontamination of Cyanide Compounds (Potassium Ferricyanide (K3[Fe(CN)6])) by DeconGel 1101
ABSTRACT Surface decontamination efficacy determination of DeconGelTM 1101 on stainless steel, carbon steel, and concrete surfaces contaminated with a cyanide compound (potassium ferricyanide) was performed with ICP-OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) according to Environmental Protection Agency (EPA) SW-846 Methods: 3005A (sampling) and 6010C (analysis). HAZARDOUS ...
-
Surface Decontamination of Industrial Coolants (Ethylene Glycol) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGelTM 1101 on stainless steel, aluminum, and concrete surfaces contaminated with Industrial Coolants (ethylene glycol (EG)) was performed with GC/MS (Gas Chromatography/Mass Spectrometry) in accordance with Environmental Protection Agency (EPA) SW-846 Methods: 3500C (sampling) and 8270C (analysis). Hazardous Materials Relevance ...
-
Surface Decontamination of Mercury Compounds (Mercury(II) Oxide (HgO)) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGel™ 1101 on stainless steel, carbon steel, and concrete surfaces contaminated with mercury compounds (mercury(ll) oxide (HgO)) was performed with ICP-OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) according to Environmental Protection Agency (EPA) SW-846 Methods 3005A (sampling) and 6010C (analysis). ...
-
Surface Decontamination of Amine Compounds (Aniline) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGelTM 1101 on stainless steel, aluminum, and concrete surfaces contaminated with amine compounds (aniline) was performed using GC/MS (Gas Chromatography/Mass Spectrometry) according to Environmental Protection Agency (EPA) SW-846 Methods: 3500C (Sampling) and 8270C (Analysis). Hazardous Materials Relevance Aniline is a volatile ...
-
Surface Decontamination of Organic Acids (Benzoic Acid) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGel™ 1101 on stainless steel, aluminum, and concrete surfaces contaminated with Organic Acids (benzoic acid (BA)) was performed with LC/MS (Liquid Chromatography/Mass Spectrometry) according to Environmental Protection Agency (EPA) SW-846 Methods: 3500C (sampling) and 8321B (analysis). Hazardous Materials Relevance BA is an ...
-
Surface Decontamination of Organic Bases (Triethylamine) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGel™ 1101 on stainless steel, aluminum, and concrete surfaces contaminated with Organic Bases (Triethylamine (TEA)) was performed with GC/MS (Gas Chromatography/Mass Spectrometry) according to Environmental Protection Agency (EPA) SW-846 Methods: 3500C (sampling) and 8270C (analysis). Hazardous Materials Relevance Tertiary ...
-
Surface Decontamination of Cadmium Compounds (Cadmium Chloride (CdCl2) and Cadmium Oxide (CdO)) by DeconGel 1101
OBJECTIVE The surface decontamination efficacy determination of DeconGelTM 1101 on stainless steel, aluminum, carbon steel, and concrete surfaces contaminated with cadmium compounds (cadmium chloride (CdCl2) and cadmium oxide (CdO)) was performed with ICP-OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) according to Environmental Protection Agency (EPA) SW-846 Methods: 3005A ...
-
Surface Decontamination of Phenolic Compounds (Catechol) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGel™ 1101 on aluminum, carbon steel, and concrete surfaces contaminated with Phenolic Compounds (Catechol) was performed with LC/MS (Liquid Chromatography/Mass Spectrometry) in accordance with Environmental Protection Agency (EPA) SW-846 Methods: 3500C (sampling) and 8321B (analysis). Hazardous Materials Relevance Catechol ...
-
Surface Decontamination of Aromatic Solids (Naphthalene) by DeconGel 1101
Abstract Surface decontamination efficacy determination of DeconGelTM 1101 on stainless steel, aluminum, and concrete surfaces contaminated with aromatic solids (naphthalene) was performed using LC/MS (Liquid Chromatography/Mass Spectrometry) according to Environmental Protection Agency (EPA) SW-846 Methods: 3500C (sampling) and 8321B (analysis). Hazardous Materials Relevance Naphthalene is a ...
-
Surface Decontamination of Cyanide Compounds
OBJECTIVE: Determine the surface decontamination efficacy of DeconGel® 1101 on stainless steel, carbon steel, and concrete surfaces contaminated with potassium ferricyanide using ICP-OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) following Environmental Protection Agency (EPA) SW-846 Methods 3005A (sampling) and 6010C (analysis). ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you