Showing results for: point-of-use water Articles
-
A compact point-of-use water purification cartridge for household use in developing countries
Simple, low-cost household interventions are known to be effective in lowering the incidence of waterborne diseases in developing countries. However, high costs along with operational and maintenance issues have prevented the successful adoption of these interventions among the affected communities. To address these limitations, a cost-effective, gravity-driven water purification cartridge has ...
-
Comparative analysis of two low cost point-of-use water treatment systems
The study examined two low-cost point-of-use water treatment systems developed in respect of bacterial and particulate removal when exposed to surface water for three months. Bacterial removal efficiency was estimated using E. coli and fecal coliforms, while particulate reduction efficiency was estimated by determining turbidity and total suspended solids (TSS). The systems investigated were ...
-
Away-from-home drinking water consumption practices and the microbiological quality of water consumed in rural western Kenya
A cross-sectional descriptive study was conducted to examine away-from-home drinking water consumption practices and the microbiological quality of water consumed in rural western Kenya. The study involved adults and schoolchildren. Data were collected using focus group discussions, questionnaire survey, observations, diaries and interviews. The findings suggest that away-from-home drinking water ...
-
‘
Hom ’: a simple point of use water treatment deviceThis study sought to explore a locally assembled ‘Hom’ point of use water treatment device by assessing aspects of its performance and possible effects of using it on compliant households and communities. The conceptual framework highlights poverty and environmental degradation as causes and consequences of one another, with ill-health caused by water-borne diseases reinforcing both to form a ...
-
Demonstration and evaluation of germicidal UV-LEDs for point-of-use water disinfection
Ultraviolet (UV) irradiation is a common disinfection option for water treatment in the developed world. There are a few systems installed in developing countries for point-of-use treatment, but the low-pressure mercury lamps currently used as the UV irradiation source have a number of sustainability issues including a fragile envelope, a lifetime of approximately one year, and they contain ...
-
Development of point-of-use water disinfection technology using ceramic water filter and electrochemical hybrid system
The efficiency of water disinfection using a ceramic water filter and electrochemical hybrid system was investigated. Escherichia coli O157:H7 was effectively inactivated even when a storage battery, charged using a solar panel device, was used for the electrolysis process. During electrolysis, the rate of microbial inactivation was higher at higher initial Cl− concentrations. This was ...
-
Bacterial adaptation and performance of household biosand water filters in differing temperatures
The household biosand filter (BSF) is a highly utilized point-of-use water treatment tool. The effect of ambient temperature on the ability of the BSF to remove microbes from water is unclear. Model filters were distributed among different temperature-controlled laboratories and dosed daily with surface water amended with sewage. Comparison of the total coliform and Escherichia coli counts in ...
-
Factors involved in sustained use of point-of-use water disinfection methods: a field study from Flores Island, Indonesia
Many scientific studies have suggested that point-of-use water treatment can improve water quality and reduce the risk of infectious diseases. Despite the ease of use and relatively low cost of such methods, experience shows the potential benefits derived from provision of such systems depend on recipients' acceptance of the technology and its sustained use. To date, few contributions ...
-
Household survey of installation and treatment efficiency of point-of-use water treatment systems in Hanoi, Vietnam
Since urban water supply is not yet available for every inhabitant in Hanoi City, numerous residents look for alternative sources such as groundwater and rainwater to compensate the supply shortage. However, in parts of Hanoi, it was reported that groundwater is polluted by various contaminants including arsenic (As) and ammonia (NH4-N). Therefore, numerous types of point-of-use (POU) water ...
-
Antibacterial properties of Ag and Ag/AgCl nanoparticles from radish and tea extracts for water treatment applications
Silver nanoparticles (AgNPs) have antibacterial properties and are widely used for water disinfection. This technology is commercially applied in point-of-use water treatment as a post-treatment for filtrate water. However, the current process of synthesizing AgNPs has several disadvantages including the use of hazardous chemicals, consumption of a large amount of energy and the formation of ...
-
Socio-economic factors influencing the spread of drinking water diseases in rural Africa: case study of Bondo sub-county, Kenya
Socio-economic and medical information on Bondo sub-county community was studied to help establish the relationship between the water quality challenges, community health and water rights conditions. Health challenges have been linked to water quality and household income. A total of 1,510 households/respondents were studied by means of a questionnaire. About 69% of the households have ...
-
A critical evaluation of two point-of-use water treatment technologies: can they provide water that meets WHO drinking water guidelines?
Point-of-use (POU) technologies have been proposed as solutions for meeting the Millennium Development Goal (MDG) for safe water. They reduce the risk of contamination between the water source and the home, by providing treatment at the household level. This study examined two POU technologies commonly used around the world: BioSand and ceramic filters. While the health benefits in terms of ...
-
Nitrification, denitrification and ammonification in point-of-use biosand filters in rural Cambodia
In order to address the United Nations Millennium Development Goal (MDG) target #7 for water and sanitation, the World Health Organization (WHO) has identified point-of-use (POU) water treatment technologies as an option for providing safe water to households. The BioSand filter (BSF) is a commonly used POU system that has been implemented in Cambodia and over 20 countries worldwide. While the ...
-
Critical parameters in the production of ceramic pot filters for household water treatment in developing countries
The need to improve the access to safe water is generally recognized for the benefit of public health in developing countries. This study's objective was to identify critical parameters which are essential for improving the performance of ceramic pot filters (CPFs) as a point-of-use water treatment system. Defining critical production parameters was also relevant to confirm that CPFs ...
-
Microbial and chemical assessment of ceramic and BioSand water filters in rural Cambodia
Unless significant advances are made in the water and sanitation sector, it is unlikely that Cambodia will meet the United Nations Millennium Development Goal (MDG) target #7 for water and sanitation. Point-of-use technologies (POU), also termed “household water treatment technologies”, have been identified as successful options for providing safe water to rural households. Ceramic water filters ...
-
Effects of physical disturbances on media and performance of household-scale slow sand (BioSand) filters
Point-of-use (POU) water treatment provides households in rural and remote communities with a means of obtaining greater control over their water quality and its effects on human health. One of the most prevalent POU interventions, the BioSand filter (BSF), is a household-scale, intermittently operated slow sand filter used by over 300,000 households. The sand and gravel media within BSFs can ...
-
Virus removal efficiency of ceramic water filters: effects of bentonite turbidity
Ceramic water filters (CWFs) are utilized in many developing countries as point-of-use (POU) water treatment devices, to reduce waterborne pathogens in potable water. Virus removal efficiencies of several CWFs are investigated under various influent conditions using MS2 (ATCC: 15597-B1) as a surrogate phage for human enteric viruses. The addition of bentonite turbidity (6–8 NTU) in the ...
-
Addition of a magnetite layer onto a polysulfone water treatment membrane to enhance virus removal
The applicability of low-pressure membranes systems in distributed (point of use) water treatment is hindered by, among other things, their inability to remove potentially harmful viruses and ions via size exclusion. According to the USEPA and the Safe Drinking Water Act, drinking water treatment processes must be designed for 4-log virus removal. Batch experiments using magnetite nanoparticle ...
-
Field trial of an automated batch chlorinator system at shared water points in an urban community of Dhaka, Bangladesh
Point-of-use water treatment with chlorine is underutilized in low-income households. The Zimba, an automated batch chlorinator, requires no electricity or moving parts, and can be installed at shared water points with intermittent flow. We conducted a small-scale trial to assess the acceptability and quality of Zimba-treated municipal water. Fieldworkers collected stored drinking water over ...
-
Efficacy of an appropriate point-of-use water treatment intervention for low-income communities in India utilizing
Moringa oleifera , sari-cloth filtration and solar UV disinfectionThis study investigated the efficacy of a POU water treatment system featuring sari-cloth filtration and/or Moringa oleifera coagulation as pre-treatments for solar disinfection (SODIS). Surface water from a peri-urban slum in Chennai, India, was treated and analysed for turbidity, organic content via chemical oxygen demand (COD) and microbiological quality via most probable number (MPN) ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you