raw water monitoring Downloads
-
Raw Water Intake Monitoring - Brochure
The Situation: Hydrocarbons in municipal water supplies, including fresh water and desalination systems, are commonly limited to less than 1 part per million. Surface water from rivers, lakes, or the sea with marine traffic, nearby pipelines, or regular flooding can be contaminated by hydrocarbons. Freshwater treatment systems can be damaged by hydrocarbons or allow them to pass through ...
-
Tecta - Applications Brochure
The TECTA B16 instrument can be used for a variety of drinking water applications, including: RAW WATER (SOURCE WATER) Regular monitoring of raw water using TECTA B16 provides important intelligence early in the treatment process, avoiding water quality surprises down the ...
-
Model RAWA-GP & RAWA-BGP - Gamma, Silt & Particulate Monitor for Raw Water & Waste Water - Brochure
Model RAWA-GP is a single detector water monitor /controller for measuring Gamma emitting radionuclides in RAW WATER. Model RAWA-BGP is a dual detector water monitor measuring both Beta and Gamma contamination in RAW WATER. The electronics are microprocessor with a full color monitor. The system is modular allowing changes or additions of functions at a later date, and allowing rapid repair by ...
-
R-208 Ion Exchange Resins Brochure
for metallic ions. Not recom-mended for raw make-up water. Requires monitoring with a conductivity ...
-
Quadbeam - Model S10-IMM - Immersion Style Sensor - Brochure
Example concentration: 0-25 g/L SiO2. Applications include return and waste-activated sludge measurement, clarifier ...
-
AquaScat - Model 2 HT - On-Line Turbidimeter - Brochure
The AquaScat measures turbidity of potable water according to IEC 27027 in a free-falling water stream. This contactless design eliminates window foiling and minimizes servicing which is especially of importance with the version HT for high turbidity. Calibration check is performed with a calibration unit with a glass reference to be mounted when performing the ...
-
AquaScat - Model 2 P - On-Line Turbidimeter - Brochure
The AquaScat measures turbidity of potable water according to IEC 27027 and is specially designed for installations with highly gaseous water under pressure. Calibration check is performed with a calibration unit with a glass reference that is mounted when performing the ...
-
AquaScat - Model 2 WTM - On-Line Turbidimeter - Brochure
The AquaScat measures turbidity of potable water according to IEC 27027 using 90+° scattered light detection in a free-falling water stream. This contactless design eliminates window foiling and minimizes servicing to a minimum. Calibration check is performed with a calibration unit that is either mounted to perform the check or that is already built in (depending on ...
-
Colifast - Model CALM - Fully Automated Early Warning System - Brochure
Colifast At-Line Monitor (CALM) - Rapid, online microbial water analysis. The Colifast At-Line Monitor – CALM is a fully automated early warning system for monitoring of coliforms and Pseudomonas aeruginosa in water. Detection time ranges from 2 to 12 hours. The technology is time-saving, cost-reducing, and environmentally friendly. Examples of CALM applications are monitoring of raw water, ...
By Colifast AS
-
Model MTM - Granular Manganese Dioxide Filtering Media Brochure
Clack MTM is used for reducing iron, manganese and hydrogen sulfide from water supplies. Clack MTM is a granular manganese dioxide filtering media used for reducing iron, manganese and hydrogen sulfide from water. Its active surface coating oxidizes and precipitates soluble iron and manganese. Hydrogen sulfide is oxidized to a sulfur. The precipitates are filtered out in the granular bed and ...
-
Birm - Granular Filter Media Brochure
and/or manganese from water supplies.Untreated water should periodically be monitored for raw water ...
-
UF3020 - Microprocessor Controller Unit Brochure
The unit type UF3020 is universal applicable for automatic monitoring and control of ultra filtration plants. There are six possible stages : 'Stand by', 'Filtration', 'Pre flush', 'Flush 1', 'Backwash' and 'Flush 2'. This unit can monitor several inputs: high switch for clean water tank, low level switch for raw water tank and an overpressure switch. Adaptable to user specific requirements by ...
-
Product Catalogue 2013
): 2.5–50 °dH (2.5) Application areas: • Drinking water production and supply • Raw water ...
-
Chloride Monitors Brochure
). Monitoring the raw water provides feed forward control of the coagulant dose. Monitoring after ...
-
First for Analysis. For Power, For Water, For Process Brochure
of reagents and maintenance). Monitoring the raw water provides feed forward control of the coagulant ...
-
Water Supply Systems and Evaluation Methods Volume I - Brochure
Acknowledgment This project was performed by the Society of Fire Protection Engineers (SFPE) and was supported by the Department of Homeland Security’s Science and Technology Directorate and the U.S. Fire Administration (USFA). SFPE is an engineering association for advancing the science and practice of fire protection engineering. Water supply is an important subject to the fire service, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you