Ductile Iron Pipes Equipment For Water And Wastewater Available In Yukon
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Plastic skids are designed to make the chain cutter lighter; creates less drag and protects the lining of the ductile iron lining and PVC piping, which will not scratch piping. These plastic skids also protect the pipe lining from breaking during cleaning vibration. Stainless steel skids are the standard application of all chain cutters and are a durable option to handle heavy-duty tasks. Chain ...
-
Manufactured by C&B Piping, Inc.based in USA
Flanged Joint ductile iron fittings are the industry standard for above ground ductile iron piping systems. We stock Flanged fittings in sizes 3” – 64” conforming to the AWWA C110 standard. We stock them as cement lined, glass lined, and Protecto 401 lined. We also apply various exterior coatings for water & wastewater which fit the application intended. We stock an ...
-
Manufactured by Trumbull Industriesbased in USA
ALSO KNOWN AS “RETAINER CLAMPS” OR “FRICTION CLAMPS”For use in preventing underground pipe joints from separating. They are designed for centrifugally-spun cast and ductile iron pipe with OD’s as shown in the table below. All Socket Clamps include two half clamps, two bolts and nuts and two washers. Sizes 3″ through 12″ are supplied with #585 cast ...
-
Manufactured by Mesta Incbased in INDIA
The Puddle Pipe made according to Seems to be IS: 1536 are of Superior Quality with Flanged pipe confirming to IS: 1536 and puddle pipe and puddle pipe fixed at desired distance. The Puddle Pipe is tight fit, tack welded and tap darted on the external diameter or the pipe. The dimensions of the puddles are same as end ribs. The Ductile Iron Puddle Pipes are made according to Seems to be IS: 8329 ...
-
Manufactured by C&B Piping, Inc.based in USA
C&B Piping is a licensed applicator of Protecto 401 Ceramic Epoxy Lining for ductile iron pipe, fittings, and fabrications. Protecto 401 is the industry standard for protection of ductile iron piping sewer lines where corrosion protection is needed. Since 1981, literally thousands of miles of ductile iron sewer pipe have been lined with Protecto 401. ...
-
Manufactured by CCI Piping Systemsbased in USA
CCI Pipe Supports are designed for horizontal pipelines allowing for vertical adjustment to adequately support the pipe from the base structure. The base stand options will accommodate the users grade requirements. The variety of head styles provide versatility for various project support needs. In addition, CCI Pipe Supports are available in several corrosion resistant ...
-
Manufactured by C&B Piping, Inc.based in USA
Flanged Joint ductile iron pipe spools are offered in sizes 3”-64” pipe diameter and lengths up to 20’ 0” long. Flanged joints are typically utilized in above ground / exposed piping systems for applications in water treatment plants, wastewater plants, pumping and lift stations, and industrial service applications. Flanged threaded joints are not recommended for buried ...
-
Manufactured by Shanxi Solid Industrial Co., Ltd.based in CHINA
Standard: ISO 2531 & BS EN545 (for potable water application) BS EN598 (for sewage application). Class: K9, Class C. Range: DN80-DN2600. Accessory: Rubber Gasket (SBR, NBR, ...
-
Manufactured by VIP Polymers Ltdbased in UNITED KINGDOM
VIP-Polymers can mould dual hardness Tyton® gaskets for Ductile Iron pipe in sizes from DN80 to DN2000 (DN2200 & DN2400 planned for the end of 2015). With over 40 years’ experience of manufacturing these seals, today our Tyton® gaskets are selected by a number of the leading Ductile Iron Pipe manufacturers worldwide as original ...
-
Manufactured by PSI Products GmbHbased in GERMANY
The PSI Compakt seal is the perfect complement to the original Link-Seal seal. Ideal sealing for wall penetrations for gas, water and sewage pipes as well as for cables against pressing and non-pressing water. Pressure plates are always made of stainless ...
-
Manufactured by U.S. Pipe. - a subsidiary of Mueller Water Products, Inc.based in USA
U.S. Pipe Fabrication is the largest fabricator of ductile iron pipe in the world. With 11 locations, over 270 employees, and countless pieces of machinery and equipment to produce fabricated ductile iron pipe to meet the needs of the waterworks ...
-
Manufactured by MuoviTech ABbased in SWEDEN
Polyethylene pressure pipes are used for transporting liquids. E.g. Pressurised water, process water, wastewater spills and stormwater. MuoviTech manufactures only in PE100, a material with better properties than older, developed materials such as ...
-
Manufactured by Saint-Gobain PAMbased in FRANCE
Gravity flow system and rising main. Transport of effluents (pH 4 to 12) from the homes to the treatment station: ductile cast iron pipes and a complete range of fittings and accessories especially designed for gravity and rising main sewerage systems, full compliance with standard EN 598, diameters 80 to ...
-
Manufactured by Plascoat Systems Limitedbased in UNITED KINGDOM
Developed by Plascoat, the world leader in thermoplastic powder technology, BPA free coating Plascoat PPA 571 Aqua can be used as an alternative to cement lining in ductile iron pipes or fusion bonded epoxy coatings on pipe fittings in the potable water and waste water industries. Whether you are a specifier, water company or a pipe ...
-
Manufactured by Buffalo Pumpsbased in USA
ANSI Standard/Frame Mounted/End Suction Pumps For the Chemical and Allied ...
-
Manufactured by Milliken Brand, is a Subsidiary of Mueller Co., LLC.based in USA
Underground distribution and transmission systems are most often designed with 4” through 20” mains. For isolation applications the Milliken® Model 510A butterfly valve is designed to be buried and forgotten until needed. Components are selected for long-term reliability, so the valves will provide service life equaling or exceeding that of the pipeline. Model 510A valves in ...
-
Manufactured by Rovanco Piping Systems, Inc.based in USA
Rovanco's Copper System is designed for piping systems above or below ground suitable for inside or outside applications. High quality polyurethane foam insulation combined with a durable watertight jacket supplied in 20' lengths, means an economical, high-quality system. Rovanco's Copper System is provided with jacketing of PVC or a spiral lock seam jacket of aluminum or galvanized steel which ...
-
Manufactured by Saint-Gobain PAMbased in FRANCE
The perfect ductile iron pipe for robust and flexible water distribution networks in all situations.Through knowledge gained by our dedicated research centre in areas such as soil corrosion phenomena, our ductile iron pipelines have the latest coating technologies and often exceed minimum industry standards. Our joints are also developed and tested here in the most extreme conditions. HYDROCLASS ...
-
Manufactured by U.S. Pipe. - a subsidiary of Mueller Water Products, Inc.based in USA
Grooved Ductile Iron Pipe is manufactured for air, water, sewage, oil, and other liquids where owners, specifiers, and contractors express a preference in lieu of flanged fabrication. The joint employs shoulders or grooves fabricated to the pipe to be used in conjunction with a segmented mechanical coupling. The joint may be designed to be fabricated as rigid or flexible to meet installation ...
-
Manufactured by Spectra Scientific, Inc.based in CANADA
The CST/berger Magna-Trak Magnetic Locator is a proven tool for location of underground utilities and materials. If the material has ferrous in it (if a magnet will stick to it), then these Magnetic Locators will find it, depending on depth and mass of the object. Land Surveyors especially enjoy using Magna-Traks for finding rebar and pipe property corners and surveying markers. Water Works ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you