Filter Beds Equipment For Water And Wastewater In Portugal
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA-TOTAL-C is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2. ZA-TOTAL-C is available with a smart low noise built-in pistons compressor, 100% oil-free. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA-TOTAL is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. It is also able to remove other pollutant like Humidity, CO2, CO, NOx, SO2 and Hydrocarbons. Very small in size, the ZA-TOTAL can filter up to 30 L/min of compressed Air and can withstand a pressure up to 8 bar (115 PSI). The reduction of hydrocarbons, including methane, and ...
-
Manufactured by Enagic - Kangen Waterbased in USA
The NEW exclusive ANESPA DX Home Spa System transforms your ordinary bathroom into a natural hot spring resort. ANESPA DX produces a continuous stream of healthy ionized mineral water. With a new, larger ceramic cartridge that removes almost 100% of chlorine and other harmful substances in your tap water, and adds safe, moisturizing minerals that are healthy for your skin and hair. Enjoy a lovely ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption. Each particle, or granule, of carbon provides a large surface area, or pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One gram of activated carbon has a surface area in excess of 3,000 m2 ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA TOTAL C HP is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2. ZA TOTAL C HP is available with a smart low noise built-in pistons compressor, 100% oil-free. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, ...
-
based in AUSTRIA
The perfect CTP solution as an air pollution control treatment for increased solid matter content (dust), sticky substances or corrosive components in the waste gas. The AutoTherm is suitable for flow rates of up to 300,000 Nm³/h, independent of the concentration and the nature of the contaminants. For waste gas temperatures from -20°C up to ...
-
Manufactured by KAMPS s.a.based in BELGIUM
The Toveko continuous sand filter marketed by Kamps is a novel method of suspended solids removal using sand filtration. It may be used with or without chemical precipitation according to the application, and is well suited in both sewage and industrial waste water treatment applications. The Toveko sand filter continuously cleans itself whilst in service, and the sand bed is therefore ...
-
based in AUSTRIA
The VOXcube purifies organic (VOC) and specific inorganic pollutants in the waste gas. The system is suitable for flow rates up to 125.000 Nm³/h, with a wide variety of concentrations and contaminants. For waste gas temperatures from -20°C up to ...
-
Manufactured by Morselt Watertechniek BVbased in NETHERLANDS
The formerly patented and proven slurry feed system can enable substantially smaller diameters than conventional ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you