Filter Presses Articles

  • Kekurangan Filter Press

    Filter Press merupakan  alat yang digunakan dalam proses pemisahan terkhusus untuk solids dan liquids. Proses ini menerepkan proses ...


    By Grinviro Biotekno Indonesia

  • Sappi Enstra Paper Mill, Gauteng, South Africa - Case Study

    Sappi Enstra Mill is situated in Gauteng near the town of Springs in South Africa. The mill celebrated its 76th anniversary in 2012 having been established in 1936, producing its first paper in 1938. Enstra produces office paper, security paper and packaging paper products of superior quality for use in different industries. ...


    By BBR Filtration Limited

  • Potsdam Wastewater Treatment Works, Milnerton, South Africa - Case Study

    Due to significant yearly increases in flow, the Cape Town City Council decided in 2004 to expand its capacity from 35 Ml/d (million litres per day) to 47 Ml/d. The older section of the works, which consisted of bio filters, were closed down due to effluent not complying ...


    By BBR Filtration Limited

  • Dewatering coal tailings at Khaa Khudag Coal Mine, Mongolia - Case Study

    The challenge: Conquer the elements, conserve resources ...

  • Membrane filter presses at Lower Fox River, USA Boskalis Environmental - Case Study

    Sustainable remediation Cost-efficient filtration of contaminated waterways ...

  • Toro Equipment, in “Hecho en Castilla y León”

    The Filter Press Draco installed in Fertifluid opens the program “Hecho en Castilla y León” broadcasted on the 12th of January ...


    By Toro Equipment S.L.

  • Dryness in filter press Draco cakes

    The design of the Draco filter presses by Toro Equipment makes it possible to obtain very dry cakes with less operator attention needed for cake unloading compared to other procedures. Nevertheless, for optimum performance in the pressing process and to ...


    By Toro Equipment S.L.

  • Reactor for pigment production - case study

    Large shearing forces are required for the production of certain pigments in order to achieve high colour intensity. For this reason, such pigments are normally produced with the help of kneading /disc dryers, which inevitably provide shearing forces due to their inherent design. The material and the time and energy required for their design makes these devices extremely expensive, especially ...


    By AVA GmbH u. Co. KG

  • Innovative horizontal reactor - case study

    AVA was recently able to present a newly developed horizontal reactor for laboratory operation. After comprehensive tests at the technology centre, a special machine type was developed for the purpose of drying powdery raw materials for filter elements. The high-tech filter elements are manufactured as end-products for usage in diverse industrial applications. The challenge in the development ...


    By AVA GmbH u. Co. KG

  • OEM Wear Strip solution - Case Study

    The Client Challenge Wear strips were needed for a sliding filter belt. In this particular application, a vacuum is applied from the underside of the assembly, through the filter belt and also through the slide wear strip, pulling the filtered material through the filter belt as it conveys down the wear strips. Multiple wear strips are joined to each other, end on end, to reach lengths of ...


    By Diversified Plastics, Inc.

  • Juice producer in France - Case Study

    Our biggest models can dewater huge amount of sludge during summer months. After a successful pilot test has been carried out, AMCON successfully installed one of our biggest models, ES-351 in the Juice factory in France. Although they had been using a belt press until then, they were not satisfied with its performance and they were always looking for an alternative solution for their sludge ...


    By AMCON Inc.

  • Ready, set... mix: water re-use and its role in concrete mixing

    Water is a key element to the concrete ready-mix manufacturing process. From mixing new concrete to cleaning out trucks, high volumes of water are in demand. To stay ahead, many operations, large and small, are prepared to re-evaluate their process to find opportunities for water re-use. A filter press is an effective piece of equipment for concrete water recycling. It separates ...


    By M.W. Watermark LLC

  • Struvite belt press removal case study

    A wastewater treatment plant near Flagstaff, AZ was experiencing problems with keeping their belt aligned on the belt press. The belt press was in operation 4 days per week for 6 hours per day. The flow rate was 150 gallons per minute (gpm). Upon close inspection of the belt press system, the maintenance staff observed scale deposits on the rollers, pan and filtrate lines. Samples were taken for ...

  • Clarification of rough beer in brewery industry case study

    Standard filtration uses diatomaceous earth (Kieselguhr) into filter-press and consists in the retention of solid particles (yeast cells, macrocolloids, suspended matter) and solutes responsible for haze. After use the disposal of Kieselguhr (after filtration) are a major difficulty due to their polluting effect. From the health perspective, the used diatomaceous earth is classified as ...


    By RVF-Filtration

  • Removal of arsenic from a deep well by electrocoagulation in a continuous filter press reactor

    We investigated arsenic removal from groundwater by electrocoagulation (EC) using aluminum as the sacrificial anode in a continuous filter press reactor. The groundwater was collected at a depth of 200 m in the plateau region, in Central Mexico, (As 134 μg L−1, Fe 0.3 mg L−1, Cd 0.7 mg L−1, Na 58 mg L−1, pH 6.8). The influence of ...


    By IWA Publishing

  • Nippoh Chemicals CO.,LTD - Case Study

    Let it does job for you! VOLUTE frees operator from maintenance. Operators had to make frequent check-up and maintenance with the existing belt filter press before introducing the VOLTUE Dewatering Press. Sludge condition changed time to time that dilute sludge often spilled over from the side of filter cloth, making operators to clean up machine every three hours. ...


    By AMCON Inc.

  • Removal of water-based filter cake and stimulation of the formation in one-step using an environmentally friendly chelating agent

    Chelate solutions, GLDA (pH of 3.3 to 13) and HEDTA (pH of 4 and 7) were incompatible with α-amylase over a wide range of temperatures. GLDA (pH 3.3) and HEDTA (pH 4) can be used to remove the filter cake in one step. GLDA (20 wt% in a 200 g solution and pH of 3.3) and HEDTA (20 wt% in a 200 g solution and pH 4) had 100% removal efficiency of the filter cake. The retained permeability was 110% ...


    By Inderscience Publishers

  • Edible oil filtration - case study

    YEAR: 2010 COUNTRY: THE NETHERLANDS N° and MACHINERY MODEL EMPLOYED : 1  AUTOMAT 800.2600 and 1 AUTOMAT 630.2000 Diemme® Filtration The customer refines mostly vegetable oil for the food industry. The oil is mainly from sunflower seeds, peanuts, palm and fish. The customer already owned old manual filter presses ...


    By Aqseptence Group GmbH

  • Mineral concentrate filtration (iron ore) - case study

    YEAR: 2010 COUNTRY: INDIA N° and MACHINERY MODEL EMPLOYED: 1 GHT 2500.P12 MEM Diemme® Filtration The customer is one of the biggest Indian steelworks with the need of dewatering a huge quantity of iron ore concentrate, employing only one machine.  This unit also has to be capable of expansion in the future, to ...


    By Aqseptence Group GmbH

  • Dredged sludge filtration - case study

    YEAR: 2009 COUNTRY: BELGIUM N° and MACHINERY MODEL EMPLOYED: 12  GHT 2000.P19 MEM Diemme® Filtration In Antwerp Harbour, lots of sediment accumulates, equal to 600,000 tons of dry material, which caused a gradual decrease in depth with the consequent reduction in navigability. Since a few years ago, the ...


    By Aqseptence Group GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you