Flat sheet membranes Applications in Europe
-
Ceramic Flat Sheet Membrane for Industrial Water Reuse
Ceramic membranes are widely applied in a number of industrial water treatment applications. for example as pre-treatment to reverse osmosis or nano filtration. Using our new generation ceramic membranes will enable a durability which provides limited maintenance and an operating life which is expected to exceed 20 years. Moreover, it enables filtration of fluids where organic and other ceramic membrane fall short, such as presence of caustics, solvents, polymers, oxidants and strong ...
By Cembrane based in Lynge, DENMARK.
-
QUA - Industrial Water Filtration
QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your ...
By QUA Group LLC Office in Milan, ITALY.
-
Membrane filtration systems for food and beverage industry
The product knowledge we gained by this experience is indicated by the following list of products suitable for processing on a GEA Filtration membrane filtration system. These systems include microfiltration, ultrafiltration, nanofiltration, and reverse osmosis with either spiral-wound, stainless steel, ceramic, tubular, or plate-and-frame ...
By GEA Office in Ettlingen, GERMANY.
-
Ceramic Flat Sheet Membrane for Drinking Water Treatment
Today ceramic MF/UF membrane filtration for treatment of drinking water is becoming more and more accepted as a viable treatment method. This trends is mainly driven by an increasing demand for a more effective removal of especially challenging feed water ...
By Cembrane based in Lynge, DENMARK.
-
Flat Sheet Membranes for Water Filtration
Our PES flat sheet membrane is especially developed for water ultrafiltration to achieve drinking water from biologically unsafe water. Thanks to our special process we are able to produce highly hydrophilic PES membranes, which also retains its hydrophilicity over the course of multiple process steps. The PES membranes are available in a wide range of pore sizes. Therefore, the membranes can be used for high flowrate applications with average bacteria retention. However, also for very small and even virus ...
By Novamem Ltd based in Schlieren, SWITZERLAND.
-
Flat Sheet Membranes for Solvent Filtration
You do solvent filtration if your process stream contains more than 10 wt% solvent. Above this level, the solvent may attack your membrane material. This can lead to a change in retention or even to a total dissolution of your membrane. Depending on your solvent and your process conditions this can happen sooner or later. Selecting the right membrane therefore becomes crucial even to laboratory separation process that handle ...
By Novamem Ltd based in Schlieren, SWITZERLAND.
-
Flat Sheet Membranes for Biomolecule Recovery
Novamem membranes are able to filter off single molecule from a solution, thanks to the very small pore sizes. In most synthesis steps, the synthesized molecule ends up in a solvent mixture. To finally retrieve the product molecule, a lot of tedious steps have to be carried out. Our Novamem membranes can simplify such recovery processes significantly. The small pore sizes can separate different sized molecules, for example monomers from dimers, with a simple physical nanofiltration. The filtration of molecule ...
By Novamem Ltd based in Schlieren, SWITZERLAND.
-
Flat Sheet Membranes for Membrane Distillation
Novamem provides specific membranes for membrane distillation. These membranes even perform if used under significant pressure. Thanks to the small pore sizes, it is also possible to perform membrane distillations with weaker hydrophilic-hydrophobic interaction. In other words: hydrophobic retention is much more effective, at smaller pore sizes as the contact survace is higher. Therefore, even much less polar liquids than water can be distilled via membrane ...
By Novamem Ltd based in Schlieren, SWITZERLAND.
-
Flat Sheet Membranes for Filtration Under Extreme Conditions
Processes are considered harsh if your they run at elevated pressure (i.e. >10 bar), high temperature (i.e. >60°C/140°F) or if any aggressive chemical is required (e.g. strong acid). Such extreme conditions can alter a membranes behavior and may change its filtration performance. Consequently, selecting the right membrane is crucial to chemical separation processes. Novamem has a few membranes, specifically for very harsh ...
By Novamem Ltd based in Schlieren, SWITZERLAND.
-
WEHRLE DIRECT-RO
Reverse Osmosis (RO) systems separate leachate into a high quality permeate while retaining organics (BOD, COD, organically bound nitrogen), ammonia, PFC/PFAs, heavy metals and salts. The WEHRLE DIRECT-RO uses organic spiral wound modules in a feed & bleed configuration at a pressure of 80 bar. These membranes are produced in high volumes worldwide and offer an optimum price/performance ratio and independ-ence in membrane replacement. The membrane modules have been specially developed for use with difficult ...
By WEHRLE Office in Bloxham Mill Business Centre , UNITED KINGDOM.
-
Membrane Units for Tough-To-Treat Wastewater Concentration industry
Thanks to our CD modules, you are able to concentrate highly contaminated wastewater such as: landfill and composting leachate, food & beverage effluents, pharmaceutical effluents, distillery effluents, textile and tannery effluents, metal working effluents, mine drainages, produced water. Here, the high contents of suspended solids, organics and/or salts doesn’t allow the application of spiral-wound NF/RO ...
By MFT Membran-Filtrations-Technik GmbH based in Köln, GERMANY.
-
Membrane Filtration for Food and Beverage Industry
Membrane technology - as a modern and innovative technology - has advanced significantly in the last few years and has established itself in different sectors. The trend towards "specialized" membranes for specific applications is increasingly taking root resulting in spiral wound modules and membrane technology establishing themselves as state of the art technology within the food processing industry. ...
By MANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) Distributor in , FRANCE.
-
Flat Sheet Membranes for Gas Separation
There is a wide variety of polymers that are known to have selective properties for certain gasses. However, the design of a separation process based on different gas permeability is not trivial. The key to a successful gas separation membrane is more than only the trade-off between selectivity and permeability. It is also a trade-off between membrane thickness and membrane aging time. Novamem is your partner in manufacturing these thin film membranes according to your specification! We have experience in ...
By Novamem Ltd based in Schlieren, SWITZERLAND.
-
Flat Sheet Membranes for Membrane Catalysis
Thanks to our process we can insert catalysts into the membrane. Once solidified, the catalytic particle is locked in the polymer ...
By Novamem Ltd based in Schlieren, SWITZERLAND.
-
Flat Sheet Membranes for Membrane Venting
Novamem venting membranes are perfectly suitable for a wide range of liquids. Membrane venting is similar to membrane distillation and pervaporation. The membrane is non-permeable for the liquid phase of the solution but permeable for the gas phase. This is achieved by repellent porous polymer membranes. For example, a hydrophobic PVDF membrane repels water so strongly that it will not flow through the pores of the membrane ...
By Novamem Ltd based in Schlieren, SWITZERLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you