Flocculant Dosing Equipment For Water And Wastewater Available In Northern Ireland
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in reasonably clean water, measuring a TSS range of 0 – 2.5 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Jenfitch INC.based in USA
Jenfitch offers a wide variety of coagulants and flocculants for your water treatment needs. We have developed customized coagulants and flocculants to achieve optimum clarity and fast settling in your clarifiers. Our flocculent are effective in increasing particle density and enhancing water release during the dewater phase. Jenfitch can provide a simple and effective chemical program to improve ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in dirty water, measuring a TSS range of 0 – 10 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
Sewage sludge dewatering offers enormous potential savings for the operators of sewage treatment plants. The costs of transport and disposal of the dewatered sewage sludge frequently make up 80% of operating costs. Depending on the capacity of the plant, 1% more dry substance in the dewatered sewage sludge can represent cost savings in the five- to six-digit range. ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For pipe ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Our LABUFLOC polymers are additives for the improvement of retention and drainage. Furthermore organic, inorganic and combined products for fiber recovery and sludge dewatering are ...
-
PremiumManufactured by Skim-pakbased in USA
The 11800-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11800-DH has 0.5 meters of total weir, and therefore is normally operated at a flow rate 1.4 m3/min, 370 gal/ min. Maximin flow rate is 500gpm. The 11800-DH excludes solid during the aeration cycle. Installation options include an articulating ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
It facilitates sludge treatment making sludge dewatering more cost effective and efficient. Toro Equipment’s Sludge Conditioning Tank (TAF) is a vertical cylindrical GRP tank that allows the chemical conditioning of sludge, facilitating filtration or decantation ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita’s comprehensive and innovative technology for swimming pool treatment offers a broad range of ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
The sludge filter pack opening and closing system is operated mechanically by means of a lever. Cake discharge by means of a scraper. Capacity: Maximum filtering surface: 1.5m² to 64.3m². Maximum number of plates: 5 to 60. Plate size: 470mm to ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom. CS2 flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media in channels mainly featuring high levels. The wedge-shaped sensors are designed for installation on either the channel wall or the channel ...
-
PremiumManufactured by Skim-pakbased in USA
The 11840-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11840-DH has 4 meters of total weir, and therefore is normally operated at a flow rate 11.2 m3/min, 2958gal/ min. Maximin flow rate is 4,000gpm. The 11840-DH excludes solid during the aeration cycle. Installation options include an articulating ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Complete automaton sludge dewatering cycle. It has an automatic cake shaking system. Maximum filtering surface 1.5m² to 132.3m². Number of plates: 5 to 35. Plate size: from 470mm to ...
-
PremiumManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in clean water, measuring a TSS range of 0 – 0.75 g/L (SiO2) and a turbidity range of 0 – 1,000 NTU. The T-series are immersion sensors and they use nephelometry (90 degree scattered light) and direct attenuated light to measure both TSS and turbidity ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement in slight to heavily polluted media. Designed for fastening in pipes using a ...
-
PremiumManufactured by Jenfitch INC.based in USA
Jenfitch offers a variety of chemicals that can be used to improve liquid/solid separation for industrial and municipal water treatment processes. We offer coagulants and flocculants that are NSF approved for potable use as well as potable water reuse applications. To learn more about our new and improved technology click below. https://jenfitch.com/coagulation-and-flocculation/ ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Complete automation sludge dewatering cycle. Only suitable for mineral sludge. Maximum filtering surface: 1.5m² at 132.3m². Maximum filtering surface: 92 m² at 129 m². Plate size: 1200 ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom. Medium measurement range for levels up to ca. 1m. Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom. POA flow velocity sensors are suitable for ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Flocculators are used for waste or surface water clarification, to optimize particles coagulation and flocculation, prior to settler or DAF. Flocculation can be done in a plug-flow flocculator or in a tank reactor. Our flocculators are build in galvanized steel or stainless steel. Max flow: up to 500 m3/h, Max water turbidity: up to 500 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you