Only show results in Texas? Ok

Flood Pump equipment for Water and Wastewater

  • Showcase

    Sumpie - Sump Pump Sensor

    Sumpie is the world’s first predictive sump pump sensor. This professional-grade sensor uses a cellular connection to monitor sump pit water levels in real-time and tells you when the sump pump needs maintenance. It sends power failure alarms, too. Sumpie can be installed in minutes.

    By Alert Labs Inc. based in Kitchener, ONTARIO (CANADA). from Products Product line

  • Premium

    Aquobex - Internal Tanking

    If your home or business requires an internal tanking solution, the best (and cheapest) time to do it is when you are reinstating your property from a flood or building in a known flood plain. It’s a meticulous process and ideally all internal fixtures and fittings need to be removed from inside the property. This includes fitted kitchens ...

    By Aquobex Ltd. based in Didcot, UNITED KINGDOM. from Commercial Flood Products Product line

  • Premium

    PISTA - Grit Pump - Top-Mounted and Flooded Suction

    Smith & Loveless’ rugged PISTA® TURBO™ Grit Pump is the only pump in the industry exclusively designed for pumping grit separated from sewage. The PISTA® TURBO™ Grit Pump is available in both top-mounted vacuum-primed and remote-mounted flooded-suction configurations. Equipped with a Ni-Hard volute and Ni-Hard ...

    By Smith & Loveless Inc. based in Lenexa, KANSAS (USA). from Headworks Grit Pumping Product line

  • Premium

    Smith & Loveless - Flooded Suction Non-Clog Pumps (FS)

    Tens of thousands of proven Smith & Loveless Non-Clog Pumps convey wastewater around the world, providing reliable service day-in and day-out. Our bold pump design retains several high standards, including oversized bearings and stainless-steel pump shafts, bronze mechanical seals for superior heat dissipation, close tolerances that prevent ...

    By Smith & Loveless Inc. based in Lenexa, KANSAS (USA). from Pumping Systems - S&L Pumps Product line

  • Premium

    X-PELLER - Non-Clog Pump Impeller

    The X-PELLER was specifically designed for high volumes of trash pumping applications and low flow conditions in 4' and 6' vacuum primed and 4' and 6' flooded suction Smith & Loveless pumps.

    By Smith & Loveless Inc. based in Lenexa, KANSAS (USA). from Pumping Stations - Pumps & Components Product line

  • Premium

    Underground Pump Station Retrofit

    Your underground pump station can be retrofitted and updated – simply – with a Smith & Loveless Underground Pump Station retrofits.  This cost-effective upgrade allows operators to extend the life of their existing infrastructure by replacing the internal components with updated S&L technology.

    By Smith & Loveless Inc. based in Lenexa, KANSAS (USA). from Pumping Stations - Pumping Retrofits Product line

  • Premium

    Smith & Loveless - Vacuum-Primed Non-Clog Pumps

    Tens of thousands of proven Smith & Loveless Non-Clog Pumps convey wastewater around the world, providing reliable service day-in and day-out. Our bold pump design retains several high standards, including oversized bearings and stainless-steel pump shafts, bronze mechanical seals for superior heat dissipation, close tolerances that prevent ...

    By Smith & Loveless Inc. based in Lenexa, KANSAS (USA). from Pumping Systems - S&L Pumps Product line

  • Premium

    STAR ONE - Flooded Suction Pump

    Tens of thousands of proven Smith & Loveless Non-Clog Pumps convey wastewater around the world, providing reliable service day-in and day-out. Our bold pump design retains several high standards, including oversized bearings and stainless-steel pump shafts, bronze mechanical seals for superior heat dissipation, close tolerances that prevent ...

    By Smith & Loveless Inc. based in Lenexa, KANSAS (USA). from Pumping Stations - Pumps & Components Product line

  • Leight Weight Dewatering Pumps

    SU light weight Dewatering Pumps are ideal for light duty applications requiring good Portability whether it be for residential use or even more demanding applications like dewatering of Pits, Sumps, Rain Water, Construction Sites, Wells etc. These light weight Pumps also have ideal applications on Ships and other Marine Vessels.

    By Su Motors Pvt. Ltd. based in Mulund (W), INDIA.

  • Axial Pump

    In the need of low head high capacity pumping applications, axial pumps are used. The importance or the use age of this type of pumps is daily increasing specially with the change of climatic conditions in the world, which is leading to uncontrolled floods.

    By Layne Bowler Pump Company Inc. based in Yenimahalle, TURKEY.

  • EU-FLO - Model UES - Ultra Efficiency Split Case Pumps

    UES (Horizontal) or UESV (Vertical) Split casing pump is designed by our company for the demand of Energy Efficiency, which combined the advantage of the word well-know manufacture.

    By Eu-Flo Pump Industries Co Ltd based in Mansion, CHINA. from Split Case Pumps Product line

  • EU-FLO - Model ENZ/ENV - Normal Close Coupling Centrifugal Pump

    ENZ/ENV type is the single stage, close-coupled Horizontal or vertical inline pump, which meets the standard DIN24255 and EN733 to ensure the dimensional interchangeability with other pumps. The pump and the motor is closed coupling together through the sleeve or coupling clutch. The pump and motor can also share the same shaft. So ENZ/ENV type ...

    By Eu-Flo Pump Industries Co Ltd based in Mansion, CHINA. from EN 733 Horizontal Centrifugal Pump Product line

  • Model New - Thermoplastic Wafer Check Valves (10 & 12)

    Introducing 10” and 12” PVC wafer check valves. Wafer check valves are installed on the discharge side of pumps in applications such as aquariums, water attractions, water treatment and municipalities to prevent back-flow flooding that could seriously damage pump systems.

    By Asahi/America, Inc. based in Lawrence, MASSACHUSETTS (USA). from Check Valves Product line

  • High Pressure Pumps

    Ideal Usage: Industrial water blasting, pipeline pigging, irrigation, standby fire protection, environmental cleanups.

    By BakerCorp based in Shafter, CALIFORNIA (USA). from Pumps Product line

  • Dewatering Pumps

    SU Dewatering Pumps are self priming, single stage, Centrifugal Pumps driven by A.C. squirrel cage induction motors in a fully submersible construction. They are easily transportable and have a wide variety of applications. These are powerful submersible contractor pumps designed for draining abrasive water from construction sites, mines, docks, ...

    By Su Motors Pvt. Ltd. based in Mulund (W), INDIA.

  • Submersible Pumps

    SU Submersible pumps are offered in 6”, 8”, 10” and 12” basic pump diameters to provide the wide range of performance necessary for agricultural, commercial, municipal and industrial applications. Advanced, low- maintenance design of all SU pump assures around – the – clock protection for the most demanding ...

    By Su Motors Pvt. Ltd. based in Mulund (W), INDIA.

  • EU-FLO - Model ISO- EIO/EIH/EIJ - End Suction Pump

    EIO/EIH/EIJ  type is the single stage, horizontal end suction pump with closed, semi-open or open impeller suitable for handling water, chemicals and corrosive liquids that is tailor-made to your special projects. EIO/EIH/EIJ type end suction pump can be supplied according to both ISO2858 and ISO5199 standards. The pumps are designed for ...

    By Eu-Flo Pump Industries Co Ltd based in Mansion, CHINA. from ISO Single Stage Centrifugal Pump Product line

  • Aussie - Model QP 6 Inch - Trash Pump

    Engineered to meet the requirements of professional contractors, rugged and dependable, these diesel powered trash pumps are ideal for de-watering applications with high solid content. Huge 4,150 lpm flow with a maximum head of 30 metres or 43 psi. Self priming from 7.6 metres.

    By Australian Pump Industries based in Castle Hill, AUSTRALIA. from QP Water Transfer Product line

  • Rodelta - Model MVP - Vertical Dry Pit Pump, Single Stage with Metallic Volute Casing

    Pump type MVP: is a vertical dry pit pump, single stage with metallic volute casing. These pumps are mainly engineered for applications where large quantity of flow with high head is required to be handled. Main applications are in Lift irrigation, water supply schemes, circulating cooling water for power plants. MVP pumps consist of Spiral casing ...

    By Rodelta Pumps International B.V. based in Almelo, NETHERLANDS. from Engineered products Product line

  • Model CUP-BB3 - Multistage Pump

    The ClydeUnion Pumps CUP-BB3 pump is a heavy duty axial split case horizontal pump with opposing impellers with either single or double suction first stage impeller pumps comply with the latest edition of API 610 and API 682 standards and are specifically designed for heavy duty, medium and high pressure applications. The ClydeUnion Pumps CUP-BB3 ...

    By ClydeUnion Pumps - an SPX Corporation brand based in Glasgow, UNITED KINGDOM. from Multistage Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you