Flow Modeling Applications available in Rhode Island
-
Premium
Cleanroom Solutions from Concept Smoke Systems
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the cleanroom environment that is being served. Testing is necessary since HEPA filters can ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for wind tunnel studies
For producing a point source of smoke in a wind tunnel environment, Concept have the Aerotech smoke system, with a heated tip on the end of a thin wand. For seeding a wind tunnel for LDA/PVA type work the ViCount 1300 system is normally supplied. This can produce either water or oil based smoke with minor re-programming, so it is a very adaptable solution. The ViCount is such a versatile machine, that its capable of everything from seeding the world’s largest wind tunnel (NASA AMES) through to producing fine ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for clean room solutions
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
SFD-2 - Microwave Solids Flow Monitor for Plugged Chute or Blocked Chute Detection
Plugged chute or blocked chute detection...If properly implemented, a level sensor / switch or solids flow monitor can indicate a condition consistent with a flow stoppage within a chute, hopper or conveying line. Depicted here are some of the more common methods for plugged chute detection. ...
By Monitor Technologies, LLC based in Elburn, ILLINOIS (USA).
-
Liquid/solid separation solutions for the fruit processing industry
This project installed a model SAF250 Suspended Air Flotation (SAFƒ) treatment system for a California food processing customer. They contacted Heron Innovators for a system to be used for wastewater pretreatment. At Heron Innovators, we build mechanically and electrically reliable systems, and provide installation support which comprehensively meets our customer’s operational needs. The system is ideal for food processing wastewater pretreatment for reducing TSS and BOD/COD in discharges to ...
By Heron Innovators based in Rocklin, CALIFORNIA (USA).
-
Flow measurement instrumentation for maximize steam flow flow calculations
We get it. All fingers point at you if productivity slips because of incorrect steam flow calculation. All you really want are flow instruments that are easy to install and provide highly accurate data. And work 24/7 with no downtime. Meet the original. In the ’90s, Sierra was the first multivariable mass vortex flow meter supplier in the world when we pioneered InnovaMass. Vortex volumetric flow and multivariable mass flow meters are the ideal technology for calculating steam flow. Our InnovaMass vortex ...
By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Mass flow meters for measuring landfill gas
Landfill Gas is a mixture of Methane, Carbon Dioxide, and Oxygen that is created by the decomposition of waste stored in landfills. According to the EPA, landfills are the third largest generator of Methane Gas. Methane Gas is the second most prevalent gas to contribute to the Greenhouse Gas (GHG) Effect and for that reason it is important to contain and process the Methane gas in a way that it does not increase the level of GHG’s in the Earth ...
By Thermal Instrument Co. based in Trevose, PENNSYLVANIA (USA).
-
PCSWMM - Advanced Modeling Software for Dual Drainage System Design
Design, model and analyze dual drainage systems for flood control in new, existing or combined developments. Surface flows routed overland (major systems such as roads, swales, street sags, storage areas) can easily and accurately be combined with underground flows (minor system, such as sewer ...
By Computational Hydraulics International (CHI) based in Guelph, ONTARIO (CANADA).
-
Combustion analyzers for mechanics (auto & truck) sector
The Enerac 700 AV (Automotive/Vehicle) 5 Gas Exhaust Emissions Analyzer for Mechanics. Enerac invented the first portable multi-parameter electronic combustion analyzer in 1979 in the US. Enerac still services this analyzer as well as all others. Today, Enerac still leads the market in research, design and ultimately the manufacturing of portable combustion emissions analyzers. Enerac only manufactures portable combustion emissions analyzers and is considered the experts in this ...
By Enerac, LLC based in Holbrook, NEW YORK (USA).
-
PCSWMM - Advanced Modeling Software for Stormwater Management & Sewer Remediation
Streamline the design and analysis of stormwater management control strategies for minimizing events such as combined sewer overflows, sanitary sewer overflows, water in basements, surcharging, street flooding and/or rainfall-dependent inflow and ...
By Computational Hydraulics International (CHI) based in Guelph, ONTARIO (CANADA).
-
Thermal mass flow meters and flow switches for landfill gas & leachate measurement
Our flow meters are built to hold up to the harshest environments with standard 316SS and electrical housings that meet most certifications. The fact that our meters are rugged and that our sensors never come into contact with the passing fluid, unlike other flow meters, means that your one time investment will offer you many years of returns. In the event something does happen, all Thermal Instrument Mass Flow Meters come standard with redundant sensors. This feature alone, saves time and money by following a ...
By Thermal Instrument Co. based in Trevose, PENNSYLVANIA (USA).
-
Electrical Based Tomography Systems for Multiphase Flow
Multiphase flows are complex and unpredictable however they have a significant bearing on the safety, costs and revenues of many processes – particularly in oil and gas, but also in aerospace, chemicals and other ...
By Industrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM.
-
Industrial and municipal wastewater treatment solutions for transportation industry
Maintenance, fueling and staging areas generate wastewater whether the vehicles travel on roads, on rails or in the air. Transportation equipment needs maintenance. Facilities that do the maintenance create wastewater with high oil and grease content and solids that need to be removed or reduced before discharge to a POTW. Tenco has successfully treated wastewater from transportation facilities with API type and Clari-Pac C coalescing oil-water separators, Clarif-Float DAF, Skim-Kleen belt oil skimmers and ...
By Tenco Hydro, Inc. based in Brookfield, ILLINOIS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you