Flow Regulation Equipment For Water And Wastewater Available In Angola
-
PremiumManufactured by BUCHIbased in SWITZERLAND
You routinely purify your samples on an open glass column and have to cope with a limited resolution and a long separation time. As a first step towards automation, we offer two small systems: the “Easy Synthesis” and the “Easy Extract” systems allow you to control the flow rate and the eluent ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-FLO Balance Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 16 gpm (1 L/s) to a maximum of 4 000 gpm (250 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-FLO balance regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process plants and is ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Bubble Separator from Particle Measuring Systems is a welded PFA device that allows entrained bubbles in an ultrapure water (UPW) or process chemical sample to separate from the sample stream through buoyancy, prior to the sample entering the liquid particle counter. The UPW or chemical sample 1) enters the middle of the bubble separator and 2) separates at the tee, with 3) the liquid sample ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-SOL Solar Powered Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 32 gpm (2 L/s) to a maximum of 4 000 gpm (250 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-SOL Solar Powered Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model LV2234 is a low volume air sampler consisting of a ¾ HP oil-less, carbon vane vacuum pump with a flowmeter, vacuum gauge and constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
During a storm event, the high volume of flowing water can overload the sewer systems and storage basins causing an overflow to occur, flooding the entire system. The ACU-VORTEX Vortex Flow Regulator is designed to regulate the flow from entering storm water overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, retention tank overflows and basin ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model LV-34M consists of a 3/4 HP oil-less vacuum pump with an airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying a bypass valve into the ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Designed for locations where space is at a premium or the emergency safety shower needs to be enclosed, this all-in-one ANSI-compliant combination cubicle shower and eye/face wash helps prevent overspray and is activated by hand upon entry. Hughes cubicle shower has a stainless steel hollow section frame enclosed in GRP sheeting with stainless steel pipes for corrosion resistance and extended ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethylene glycol, which retain the HTO component. The sample gas, now less the tritiated water vapor, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. The oxidized sample gas flows through two (2) more vials with ethylene glycol that retain the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-22 is a low volume air sampler consisting of a 1/4 HP oil-less, carbon vane vacuum pump with an air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum pressure drop at all times by permitting ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Science of Process Gas Flow Metering Advanced, Future Ready! ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST), with the industry's most advanced flow sensors to achieve a truly state-of-the-science flow metering solution for industrial processes ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This valve will control the air flow rate to ±5% of the set flow rate over a wide pressure differential. It is the best commercially available mechanical vacuum flow controller. The unit operates by use of two diametrically opposed springs and a diaphragm that controls the valve opening. Depending upon pump capacity, flows between 0.5 to 10 CFM can be controlled by increasing or decreasing ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model FJ28BE is counter-top cabinet model, low-volume air sampler with a 1/4 HP oil-less carbon vane vacuum pump, and a constant air flow regulator for use where a near constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum head drop at all ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-14ME is a cart mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 122 cm - 213 cm (4' to 7') above floor level. The LV-14ME air sampler includes a 1/4 HP oil-less, carbon vane vacuum pump with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-100-XX/100E-XX Series portable flow computer systems are designed to upgrade existing air sampling systems. The GAS-100-XX/100E-XX are connected in line between the pump inlet and the filter holder. The GAS-100-XX/100E-XX upgrade eliminates the need to engage in expensive conversions of equipment or the need to purchase new air sampling ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
20 nm Online & Sample Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring Systems (PMS) supports the International Roadmap for Devices and Systems (IRDS) and a large variety of ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-804DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-80DT4 Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The GAS-804DT Series design ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-22E environmental air sampling system with digital flow meter is a low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice, by varying the flow through a bypass valve into the pump. This system allows the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model GAS-22E Global Air Sampling System is a microprocessor controlled low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice, by varying the flow through a bypass valve into the pump. This system allows the pump ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-1E portable air sampling system with a digital flowmeter is a low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you