Flow Regulation Equipment For Water And Wastewater Available In Latvia
-
PremiumManufactured by BUCHIbased in SWITZERLAND
You routinely purify your samples on an open glass column and have to cope with a limited resolution and a long separation time. As a first step towards automation, we offer two small systems: the “Easy Synthesis” and the “Easy Extract” systems allow you to control the flow rate and the eluent ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model SRS-28BMHTE heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model SRS-28BMHTE contains a standard rotameter for flow measurements. The air sampler is contained in a powder coat painted ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-14MHT is a heavy-duty hand truck mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4′ to 7′ (122 cm – 213 cm) above floor ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model LV2234 is a low volume air sampler consisting of a ¾ HP oil-less, carbon vane vacuum pump with a flowmeter, vacuum gauge and constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption. Each particle, or granule, of carbon provides a large surface area, or pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One gram of activated carbon has a surface area in excess of 3,000 m2 ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-FLO Balance Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 16 gpm (1 L/s) to a maximum of 4 000 gpm (250 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-FLO balance regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process plants and is ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model FJ28BE is counter-top cabinet model, low-volume air sampler with a 1/4 HP oil-less carbon vane vacuum pump, and a constant air flow regulator for use where a near constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum head drop at all ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Science of Process Gas Flow Metering Advanced, Future Ready! ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST), with the industry's most advanced flow sensors to achieve a truly state-of-the-science flow metering solution for industrial processes ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-1DE is a low volume air sampler consisting of a 1/4 H.P. oil-less, carbon vane vacuum pump with a flow meter, a vacuum gauge and a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Bubble Separator from Particle Measuring Systems is a welded PFA device that allows entrained bubbles in an ultrapure water (UPW) or process chemical sample to separate from the sample stream through buoyancy, prior to the sample entering the liquid particle counter. The UPW or chemical sample 1) enters the middle of the bubble separator and 2) separates at the tee, with 3) the liquid sample ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model GAS-22E Global Air Sampling System is a microprocessor controlled low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice, by varying the flow through a bypass valve into the pump. This system allows the pump ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-22 is a low volume air sampler consisting of a 1/4 HP oil-less, carbon vane vacuum pump with an air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum pressure drop at all times by permitting ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
At present, daily calibration or zeroing process before vehicle measurement of exhaust gas analyzers in some detection station will use ambient air for zeroing, not completely meeting purity requirement of zero gas(especially for NO detection based on infrared principle, which will exists oisture interference). In addition, some other detection ststions use zero gas for zeroing but the amount is ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-1D is a low volume air sampler consisting of a 1/4 H.P. oil-less, carbon vane vacuum pump with a flow meter, a vacuum gauge and a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This valve will control the air flow rate to ±5% of the set flow rate over a wide pressure differential. It is the best commercially available mechanical vacuum flow controller. The unit operates by use of two diametrically opposed springs and a diaphragm that controls the valve opening. Depending upon pump capacity, flows between 0.5 to 10 CFM can be controlled by increasing or decreasing ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-14M series is a cart mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4′ to 7′ (122 cm – 213 cm) above floor level. Filter holder is ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
With flow rates ranging from 8 to 20 gallons per minute, the NSF 55 certified series is suitable for use in homes and cottages as well as small commercial and industrial ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-28BE environmental air sampling system with digital flow meter is a low volume air sampler consisting of a 1/4 H.P. oil-less carbon vane vacuum pump with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q has incorporated a high efficiency, variable speed circuit in its CF-995B, battery operated air sampler series which allows its users to preset flow rates by varying the blower motor speed. The CF-995B & CF-995B-4 are ideal for adjustable flow, remote location air sampling where AC line power is not available. An internally mounted battery and battery charger eliminate the need for the ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-SOL Solar Powered Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 32 gpm (2 L/s) to a maximum of 4 000 gpm (250 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-SOL Solar Powered Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you