Flow Regulation Equipment For Water And Wastewater In Ontario
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
With flow rates ranging from 8 to 20 gallons per minute, the NSF 55 certified series is suitable for use in homes and cottages as well as small commercial and industrial ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
More than 90% efficiency for most exhaust constituents. Low scrubber reagent consumption of 1 liter per minute. Up to 98% of Cyclonic mist retention. Works best with exhaust flow across from 1,000 to 1,400 ft/min across. Compact and innovative design with dimensions of 20 x 20 x 30 in (W x D x H), 50 lbs. Works with minimum of 30 PSI scrubber reagent inlet pressure. All plastic acid and alkali ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The Eco-ROTM provides an optimized membrane operation for bulk TDS removal in applications involving higher TDS feed waters and/or high purity product waters. Eco-Tec’s team of engineers will design an application specific RO system to deliver maximum throughput with minimum waste, offloading much of the regeneration need of the downstream Recoflo ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-FLO Balance Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 16 gpm (1 L/s) to a maximum of 4 000 gpm (250 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-FLO balance regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process plants and is ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
20 nm Online & Sample Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring Systems (PMS) supports the International Roadmap for Devices and Systems (IRDS) and a large variety of ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Pedestal mounted, plumbed-in emergency eye/face wash with open stainless steel bowl and 316L stainless steel pipework. Designed in accordance with ANSI and EU standards, this pedestal mounted self-draining eye/face wash is intended for indoor use but may, where practical, be located outdoors in warmer climates. High flow rate aerated diffusers provide an improved washing action and prevent ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
This regulator enables a constant flow with the high passive security of the vortex valve. Programmable control unit with remote control option. For small to medium flow ...
-
Manufactured by G.E.T. Industries Incbased in CANADA
The comminutor shall be designed to handle the flows indicated below, within the head loss noted., , hydraulic capacity 20 MGD (75,700m3/day), , satisfactory operation shall occur under conditions of zero flow, , head loss at peak flow shall not exceed 30 inches (762), , design shall be such that the flow enters the size reduction and screening device horizontally and exits vertically downward to ...
-
Manufactured by Torontech Inc.based in CANADA
While ToronTech gate valves are typically used to permit or prevent the flow of liquids, they differ from our ball valves in that the sealing surfaces between the gate and the seats are planar. That means gate valves will often be used when a straight-line flow fluid with a minimum restriction is required. Additionally, the gate faces can be used to form a wedge shape or be placed in a ...
-
Manufactured by FRC Systems International - A Sulzer Brandbased in USA
Wastewater treatment equipment can get kind of complex because no single piece of wastewater process equipment can stand alone. That’s why FRC always delivers integrated systems and solutions engineered for the project at hand. We’ve completed more than 500 projects, and rarely have we been tasked with just supplying a DAF unit or a chemical feed pump. Our clients repeatedly come back ...
-
Manufactured by Recover U Technologies and Services Inc.based in CANADA
The Recover U carbonic acid and ozone steam sauna system for home and clinic is equipped with sauna cabinet, heavy duty steamer, oxygen concentrator, ozone therapy kit: generator with accessories, CO2 flow regulator and user ...
-
Manufactured by G.E.T. Industries Incbased in CANADA
The comminutor shall be designed to handle the flows indicated below, within the head loss noted., , hydraulic capacity 3.5 MGD (13,200m3/day), , satisfactory operation shall occur under conditions of zero flow, , head loss at peak flow shall not exceed 20 inches (500), , design shall be such that the flow enters the size reduction and screening device horizontally and exits vertically downward ...
-
Manufactured by G.E.T. Industries Incbased in CANADA
There shall be furnished one (1) one only Grind Hog Model 7A-6 Comminutor as manufactured by G.E.T. Industries Inc. with rotation in a counter-clockwise ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The GA-360E/F360E Series is a line up of units that provide ultrahigh sensitive, highly accurate, continuous monitoring of trace amounts of impurities contained in gases (N2, O2, He, Ar, H2, and Air) used in the semiconductor manufacturing process. Utilizing a cross-modulation method, GA-360E/F360 Series units have no zero drift due to the simultaneous analysis of the zero gas and ordinary time ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Designed in accordance with ANSI and EU standards, this wall-mounted eye/face wash with integral lid is intended for indoor use but may, where practical, be located outdoors in warmer climates. Integral lid connects to the water valve for automatic operation when the lid is pulled down. The lid also ensures that the bowl remains clean and free from contamination. High flow rate aerated diffusers ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Pedestal mounted, plumbed-in emergency eye/face wash with open stainless steel bowl and galvanised mild steel pipework. Designed in accordance with ANSI and EU standards, this pedestal mounted self-draining eye/face wash is intended for indoor use but may, where practical, be located outdoors in warmer climates. High flow rate aerated diffusers provide an improved washing action and prevent ...
-
Manufactured by Aqua One Filtration Inc.based in CANADA
C Series Dual Purpose Power Activated Carbon Cartridges offer an economical solution for all your general purpose water filtration needs. Constructed of a carbon-impregnated cellulose media, these dual purpose cartridges filter out fine sediment particles and reduce unwanted taste, odor, and chlorine odor from tap water. A polyester reinforcement backing and external netting provide additional ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Pedestal mounted, plumbed-in emergency eye/face wash with closed ABS bowl and galvanised mild steel pipework. Designed in accordance with ANSI and EU standards this DVGW certified pedestal mounted eye/face wash is intended for indoor use but may, where practical, be located outdoors in warmer climates. Integral lid connects to the water valve for automatic operation when the lid is pulled down. ...
-
Manufactured by Air Power Products Limited (APPL)based in CANADA
Fast response time Digital led display Dry relay contact output Adjustable set point 4-20 mA/0-5 VDC Linear analogue output -9º to -40ºC (+15º to -40ºF) or -12 to +21ºC (+10 to +70ºF) dew point ranges easily convertible optional ranges available 1/60/120V or 24VDC other voltage on request Economical replaceable sensor (no calibration required) Sample air sensor block with needle valve for ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Pedestal mounted, plumbed-in emergency eye/face wash with closed GRP bowl and handheld eyebath diffuser in 316L stainless steel pipework. Designed in accordance with ANSI and EU standards, this pedestal-mounted eye/face wash with integral lid is intended for indoor use but may, where practical, be located outdoors in warmer climates. The unit incorporates an additional handheld eyebath diffuser ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you