Food Industry Wastewater Equipment For Water And Wastewater Near Canada
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme UniSet, with its microprocessor-based system, features a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
-
Manufactured by ACR Systems Inc.based in CANADA
Nautilus data loggers are ideal for monitoring temperature in extreme environments where conventional data loggers are not able to ...
-
Manufactured by Diversified Plastics, Inc.based in USA
Drag Conveyors encompass a wide range of industries and applications from grain production to mining to food processing. Regardless, drag conveyor components must stand up to continuous movement, variable speeds and extreme wear. At Diversified Plastics, Inc. our manufacturing capabilities support a broad range of standard and custom plastic components for drag conveyors. Most important, the ...
-
Manufactured by Fluence Corporationbased in USA
This high-efficiency air flotation system removes fats, oils, and floatable solids from your waste stream. The ZEPHYR induced-air flotation system assists in the removal of fats, oil, and floatable solids by creating fine bubbles that attach to solids and bring them to the surface, making it ideally suited for oil and grease recovery. Clients use the Zephyr induced-air flotation system in pulp ...
-
Manufactured by Fluence Corporationbased in USA
A diamond-shaped, open-ended design maximizes bubble-shearing action and offers a simple approach to solving clogging issues. CYCLONE coarse bubble diffusers are easy to install, require no scheduled maintenance, and are perfect for any coarse bubble system. The Cyclone is a proven performer. It’s easy to install and needs no scheduled maintenance, which makes it perfect for any coarse ...
-
Manufactured by JWC Environmentalbased in USA
Industrial Rotary Drum Screens Achieve Superb Solids Separation. JWC’s line of IPEC Internally Fed Rotary Drum Screens for industrial wastewater applications are designed to provide superior solids recovery from waste streams. JWC has been providing reliable and robust rotary screens globally through its IPEC brand since 1979. They have been used in a variety of food & beverage and ...
-
PremiumManufactured by Octaform Systems Inc.based in CANADA
A proven PVC stay-in-place concrete forming system that is ideal for the construction of high-performance tanks. Octaform can be integrated into anything from a simple manure tank to the most complex recirculating aquaculture systems Builders around the world know that Octaform's built-in PVC finish offers the best possible defense in the harshest ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Flow up to 168 m3/h UV system with hygienic design of radiation chamber. For reliable disinfection and constant quality in your production ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Flow up to 168 m3/h UV system with hygienic design of radiation chamber. For reliable disinfection and constant quality in your production ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The SuperDrum™ is an automatic, self-cleaning microscreen filter designed for removal of suspended solids. Filtration opening sizes range from 10 microns to several hundreds of microns. Construction materials are chosen depending on water quality, with stainless steel, acid-proof steel, duplex steel, and FRP among the most common choices. The filter material can be constructed of either ...
-
Manufactured by CECO Environmentalbased in USA
Our Dean Pump brand pH Series Horizontal ANSI Process pump is an end-suction back pull out design, engineered to ensure long, continuous service life at low cost. The fully open impeller design provides smooth inlet passages for solids handling and stringy material, low NPSH, and minimum stuff box ...
-
Manufactured by CECO Environmentalbased in USA
The pH Series chemical process pumps are built to ASME/ANSI B73.1 dimensions. Twenty-eight sizes are available in ductile iron, 316SS, CD4MCu and Alloy 20 construction. Additional higher metal alloys (Hastelloy B or C, titanium, etc.) are available upon ...
-
Manufactured by CECO Environmentalbased in USA
Our Dean Pump brand M300 Series Magnetic Drive ANSI Chemical Process Pump is custom-designed to efficiently meet your specific needs for a sealless pump to handle hazardous toxic fluids. Our Series 300 pump utilizes a synchronous drive system with permanent rare earth magnets to eliminate mechanical seals and virtually end pump shaft leakage, delivering optimal performance and efficiency for ...
-
Manufactured by CECO Environmentalbased in USA
The pHP Series Pumps feature excellent priming times, power frame interchangeability with the pH Series (ANSI) chemical process pumps, and suction lifts up to 20 feet (6.1 m). Five sizes are available in ductile iron or 316SS ...
-
Manufactured by CECO Environmentalbased in USA
Our Dean brand pHP Series Self-Priming Chemical Process Pumps are custom-engineered to meet the demands of a wide range of chemical and industrial applications. Featuring excellent priming times, power frame interchangeability with the pH Series (ANSI) chemical process pumps, and suction lifts up to 20 feet, our pumps are designed to provide high reliability, optimal performance, and easy ...
-
Manufactured by Shenzhen Dreamemway Environmental Products Co,.Ltd (DEP)based in CHINA
Place of Origin: Colorado·USA. Place of manufacturer: Shenzhen·China. Certification: SGS/ISO 9001. Series Name: DM-SD(MBR). Membrane type: Submerged Hollow Fiber. Size Custom-made: ...
-
Manufactured by Shenzhen Dreamemway Environmental Products Co,.Ltd (DEP)based in CHINA
Place of Origin: Colorado·USA. Place of manufacturer: Shenzhen·China. Certification: SGS/ISO 9001. Series Name: DM-SD(MBR). Membrane type: Submerged Hollow Fiber. Size Custom-made: ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you