Only show results available in Virginia? Ok

Fouling (Fouling Control) equipment

  • Premium

    BIoGEORGE - Microbial Fouling Monitoring Device

    The BIoGEORGE is a probe with output device monitoring microbial fouling, i.e. biofilm activity. It has a warning system with led's for unacceptable biofilm growth, whereby the efficacy of biocide dosing can be read directly. Fouling by microorganisms, i.e. biofilms, in cooling-water systems is one of the most important causes of heat transfer ...

    By Sweco Nederland BV based in De Bilt, NETHERLANDS.

  • AmSperse - Model 4310 - Cooling Water Bio-Dispersant

    AmSperse 4310 provides highly effective control of troublesome bio-films that foul heat exchanger surfaces and act as a catalyst for other deposits. In addition to providing excellent dispersion of biofouling, AmSperse 4310 is an excellent general dispersant for dirt, loosened corrosion and scale, and other contamination that normally must be ...

    By AmSolv based in Waxahachie, TEXAS (USA). from Dispersants / Fouling Control Product line

  • AmSperse - Model 4305 - Scale Inhibitor & Dispersant

    AmSperse 4305 provides highly effective control of a broad range of sludge and troublesome foulants that deposit on heat exchanger surfaces and act as a catalyst for foulants and other deposits. In addition to dispersion of foulants and suspended solids, AmSperse 4305 is an excellant general dispersant for suspended solids, sludge, mud, oil, ...

    By AmSolv based in Waxahachie, TEXAS (USA). from Dispersants / Fouling Control Product line

  • AmSperse - Model 4303 - Polymer Dispersant for Silica Deposition Control

    AmSperse 4303 provides highly effective control of a broad range of troublesome silica based deposits. It is designed for use in a wide range of industrial recirculating cooling water, boiler and process waters including filtration and reverse osmosis. In addition to inhibiting and removing silicate deposits AmSperse 4303 is an excellent general ...

    By AmSolv based in Waxahachie, TEXAS (USA). from Dispersants / Fouling Control Product line

  • Premium

    Purolite - Model A850 - Organics ;Tannin Removal and Demineralization - Excellent Resistance to Fouling

    Principal Applications: Organic Matter Removal. Tannin removal. Demineralization. Acid Retardation.

    By Purolite Corporation based in Bala Cynwyd, PENNSYLVANIA (USA). from Strong Base Anion Gel Products Product line

  • TriSep - Model X-20 - Low Fouling Membrane

    TriSep X20 elements are manufactured with a unique polyamide-urea membrane. This membrane chemistry has anti-fouling properties which are inherent to the barrier layer and will not wash out over time like many surface coated membranes. 

    By TriSep Corporation based in Goleta, CALIFORNIA (USA). from Reverse Osmosis Membranes Product line

  • Memcleen S - removal of silicone or polymer fouling

    This is a very effective product for removal of silicone or polymer fouling. The product can be used at up to a 10% concentration in water.

    By Dynatec Systems Inc. based in Burlington, NEW JERSEY (USA). from Membrane Cleaning Chemicals Product line

  • Vontron - Model FR Series - Fouling Resistant Membranes

    FR Series: Fouling Resistant Compound RO Membrane Element. FR membrane series is mainly applied to reuse of wastewater and treatment of high-polluted surface water. For treatment of water with inferior quality grade, it adopts the design of wider feedwater inflow conduit net, which makes it easier to be cleaned. Furthermore, the membrane surface ...

    By Vontron Technology Co., Ltd. based in Xicheng District, CHINA.

  • PentoMag - Model 2550 - Coal Slagging (fouling) System

    PentoMag 2550 is an additive to prevent coal slagging (fouling). The term 'slagging' is understood as formation of hard, sticky deposits covering evaporator and super-heater heat exchange tubes inside the furnace. Usually the slagging starts on the firebox tubes or around the burners, then, once a first layer has formed, fouling occurs rapidly as ...

    By Pentol-Enviro AG based in Basel, SWITZERLAND. from Coal Fired Plants Product line

  • DATS - Model III - Fouling Monitor System

    Principle: The DATS-III Fouling Monitor utilizes the latest in microprocessor technology to simulate condenser / heat exchanger environment on a fluid side stream through a controlled tube section. By matching the tube material, heat flux, and flow rates to an actual process, the DATS-III is able to provide vital information regarding performance ...

    By Bridger Scientific Inc. based in Sagamore Beach, MASSACHUSETTS (USA).

  • Memcleen B - Organic Fouling Control Chemical

    This is a cleaner for removal of organic fouling and does not contain chelating agents. It is a high solvency caustic cleaning solution normally used at 1-2% mix concentration.

    By Dynatec Systems Inc. based in Burlington, NEW JERSEY (USA). from Membrane Cleaning Chemicals Product line

  • BCP - Model 2000 Series - Clean-Up Fouled Systems

    AMSA BCP™ 2000 series contains products that are organic deposit cleaners, penetrant aides, dispersants like DTEA II™ but are designed with special properties for unique applications. Similar to DTEA II™, BCP™ 2430 is used to clean-up fouled systems and keep cooling water systems clean with a

    By AMSA, Inc. based in Auburn, MICHIGAN (USA).

  • Humidur - Model AF - Anti-Fouling Coating

    Humidur® AF is the anti-fouling coating in the Humidur® product range. This environmentally approved product is generally applied on structures where fouling forms a threat to the operations. The coating can be applied to static and dynamic structures as the mechanism is based on friction-less leaching. It is designed to be applied in ...

    By Acotec NV based in Erembodegem, BELGIUM.

  • ProDATS - Fouling Monitor System

    The ProDATS fouling monitor operates on thermal heat transfer principles. The device exposes and monitors two heated, tubular inert metal substrates in the aqueous environment of a customers heat transfer media. Sensors in the system quantify the extent to which fouling material deposits on the surfaces. As the inside surface of the tubular ...

    By Bridger Scientific Inc. based in Sagamore Beach, MASSACHUSETTS (USA).

  • Ecospec - Model BioMag - Bio-Fouling Control

    Any structure in contact with water can be affected by bio-fouling. Traditionally, chemicals have been used to control bio-fouling. Another method to manage bio-fouling is electrolysis, which consumes lots of energy requires consumable parts that increase operational costs and has an adverse effect on the environment. BioMag is the first ...

    By Ecospec Global Technology Pte Ltd based in Singapore, SINGAPORE. from Marine Product line

  • Inorganic Fouling of Packings

    Inorganic Fouling of Packings

    By Analytix Technologies, LLC. based in Houston, TEXAS (USA).

  • Dow FILMTEC - Model FORTILIFE™ CR100 - Fouling Resistant Element

    The DOW FILMTEC™ FORTILIFE™ CR100 element is one of the industry’s most advanced fouling resistant element technology specially designed to provide relief from biological fouling. The element’s ultra low differential pressure provides improved hydraulic balance (more even distribution of flux across all the elements in the ...

    By Dow Water & Process Solutions based in Midland, MICHIGAN (USA).

  • Model LFC - Low Fouling Membranes

    LFC3-LD from the LD Technology™ innovative low fouling membranes, combines the attributes of a neutrally charged surface with hydrophilicity to achieve the lowest organic and colloidal fouling in the most demanding feed water conditions. Superior membrane technology is the key to Hydranautics’ innovative LFC (Low Fouling ...

    By Auxicolor, S.A. based in Terrassa, SPAIN. from Hydranautics Membranes Product line

  • Fouling Resistant Membranes

    The biggest problem with using the RO membranes can be contamination (or fouling) of the membrane layer. Especially in the case where surface water or wastewater contains highly-concentrated organic substances, the membrane may bear irreparable damage. However, CSM’s Fouling Resistant RO Membranes can significantly reduce such instances.

    By Toray Chemical Korea based in Seoul, SOUTH KOREA. from Spiral Wound Elements Product line

  • OLTREMARE - Low Fouling Elements

    Better resistance to fouling and cleaning is the key to Oltremare's innovative FOUL element. FOUL elements offer breakthrough technology in the treatment of difficult feed-waters, municipal wastewater and other challenging feed-waters. Until now, these applications have required significant pretreatment prior to subjecting them to a composite ...

    By OLTREMARE based in Fano, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you