Gravity Sewers Equipment For Water And Wastewater Available In Florida
-
Manufactured by Armtecbased in CANADA
Armtec’s precast reinforced concrete pipe, box culverts and spans are used for transmitting stormwater and sanitary (waste) water. Concrete pipe is primarily used for gravity storm and sanitary sewers, and is available with bell and spigot connections and rubber gaskets for maximum water tightness. Pipes are made in standard diameters of 250 mm to l,350 mm, with larger sizes available on ...
-
Manufactured by Aqseptence Group GmbHbased in GERMANY
Roediger vacuum systems are a cost effective alternative to gravity sewer systems. Vacuum systems are particularly attractive in environmentally sensitive areas and when difficult subsurface conditions exist such as high groundwater table, unstable soils, rock and restricted construction ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
IPEX Centurion extends the corrosion-free benefits of Blue Brute® to larger diameters of pipe and new ...
-
based in SPAIN
The Muharraq project is a 100,000 m3/d state-of-the-art wastewater treatment plant with a sewer conveyance system in the Muharraq catchment area. The conveyance system includes the first 16.5 km deep gravity sewer trunk pipeline in the GCC region and a wastewater collection network. This plant uses tertiary treatment to recycle part of the treated used water into clean high-grade reclaimed water. ...
-
Manufactured by Prinsco, Inc.based in USA
ECOFLO100 is an industry first: a high density polyethylene pipe containing a minimum of 40% recycled HDPE and engineered to provide a 100 year service life. It offers material performance exceeding the requirements of AASHTO M294 or ASTM F2306, and is the ideal choice for high-volume watertight gravity-flow drainage applications where an environmentally-conscious product is in demand. ECOFLO100 ...
-
Manufactured by Cascade Waterworks Manufacturing Companybased in USA
Casing spacer end seals shall be a pull-over type construction and made from Neoprene with T-304 stainless steel bands for securing the ends of the end seal to the casing pipe and carrier pipe. Casing spacer end seals shall be Model CCES as manufactured by Cascade Waterworks Mfg. Co. of Yorkville, IL or approved ...
-
Manufactured by Advanced Drainage Systems, Inc. (ADS)based in USA
SaniTite HP (High Performance) Triple Wall Pipe couples advanced polypropylene resin technology with a proven and exclusive triple wall (30” - 60”) profile design for superior performance and durability. SaniTite HP meets and exceeds typical standards for pipe stiffness and joint integrity. When specifying pipe per ASTM F2764* on a gravity flow sanitary sewer project, you are ...
-
Manufactured by Rinker Materials – Concrete Pipe Division, a QUIKRETE Companybased in USA
Rinker Materials manufactures a complete line of standard and specially designed reinforced concrete O-Ring pipe for various sanitary sewer applications. This would include both gravity and low-head pressure ...
-
Manufactured by JM Eaglebased in USA
JM Eagle’s Eagle Loc IPS suitable for use in rural water, and agricultural and turf irrigation pipelines, as well as gravity sewer, force main and water reclamation ...
-
Manufactured by Advance Products & Systems, LLC.based in USA
APS offers a proven solution with Casing Spacers to outperform the labor intensive, unreliable use of wooden skids. Casing Spacers center water and sewer pipes in casings with easy installation, are virtually corrosion proof, and provide insulating protection from a possible electrical shorting between the carrier pipe and casing pipe. No special tools or grease needed, and they are easily bolted ...
-
Manufactured by PLASSON Ltd.based in ISRAEL
PLASSON's Wastewater System: For use with PE pipe in leak free Wastewater Systems, Gravity Sewers, Vacuum ...
-
Manufactured by JM Eaglebased in USA
JM Eagle realizes the growing demand for an effective all-out attack on water pollution, highlighting the need for improved sanitary sewage collection systems. A modern system needs pipe with improved design for reserve strength and stiffness to increase load-bearing capacity - all within the framework of maximizing sewer system capacity at a resonable cost. JM Eagle's Ring-Tite PVC sewer pipe is ...
-
Manufactured by Prinsco, Inc.based in USA
As part of Prinsco’s water management product portfolio, our Stormwater Quality Unit (SWQU) is designed to treat stormwater to remove debris collected in runoff including, trash, sediment, oils, and other suspended solids. The Prinsco SWQU offers an extremely cost-effective alternative to heavier reinforced concrete units and can be installed quicker with smaller equipment, allowing further ...
-
Manufactured by American Cast Iron Pipe Companybased in USA
AMERICAN SpiralWeld Pipe supplies steel pipe for line work applications in diameters from 24 to 144 inches and joint lengths up to 50 feet. Line work typically ...
-
Manufactured by Chart Industriesbased in USA
Combat odor and corrosion problems in your collection system with BlueInGreen technology. Designed to eliminate sulfide production by promoting an aerobic environment, our odor control solutions offer an effective alternative to chemical treatment in force main and gravity sewers. ...
-
Manufactured by Wastech Controls & Engineering, Inc.based in USA
The LabDELTA Plus is a skid-mounted pH adjustment system for neutralizing small-volume laboratory process wastewater and is designed for continuous flows up to 3 gpm. This continuous system incorporates two active treatment stages along with effluent pH monitoring to ensure that the treated wastewater will be safe to discharge to the public sewer ...
-
Manufactured by Link-Pipe Inc.based in CANADA
Link-Pipe offers a variety of patented solutions for trenchless sewer pipe repair. Our commitment to high quality technologies and customer service helps ensure that the solutions we provide resolve your trenchless sewer pipe repair needs in the most efficient manner. If you require trenchless sewer pipe repair, we can help you find the service that would be the best match for your ...
-
Manufactured by Jung Pumpen GmbHbased in GERMANY
Plastic pumping stations for sewage pumps, suitable for areas with motor vehicle traffic.Pumps for pressure drainage systems for urban areas or individual ...
-
Manufactured by NRG International Ltd Oybased in FINLAND
In MaxiLine relining, a new plastic pipe is pushed inside the existing sewer in pieces. The lining is performed through manholes by inserting the pipe inside the existing sewer in 50 cm pieces. The method is fast and it does not need any preliminary excavation work. With the help of a hydraulic installation tool, up to several hundred pipes can be installed in the pipeline at one ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Naco’s fabricated C900/905 fittings are designed as a robust and corrosion-resistant alternative to cast iron pressure piping systems. Naco’s fabricated PVC CIOD fittings have a dimensional ratio (DR18 or DR25) equal to or greater than that of the pipe from which they are fabricated. Our fabricated fittings shall be manufactured from segments of PVC pipe bonded together conforming ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you