Grease Removal Equipment For Water And Wastewater Near Solomon Islands
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IB/AS Combination operators are Multi-turn devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IS operators are Multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Series IB operators are multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for the most demanding motorised ...
-
Manufactured by BOKELA GmbHbased in GERMANY
BoHiBar Drum filters deliver unique results in the filtration, washing and demoisturing of fine-grained or difficult-to-filter products, especially in demanding product and process conditions. High filtration pressure differences up to 6 bar (g) ensure high specific throughputs, intensive cake washing and very low residual moisture. The closed design ensures a gas-tight, leakproof operation when ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The Hydroflux GT is a unique product that will remove grease, oils and solids from commercial kitchen wastewater to allow discharge of the wastewater to sewer. It offers a lower footprint than traditional DAF systems and utilises almost half the ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The HUBER RoMEM Screens is one of the range of high quality German manufactured screens that has been designed specifically for pre-MBR screening. Over 100 RoMEM screens are operational worldwide in large scale MBR plants protecting both flat sheet and hollow fibre membranes. Separation of fibrous material is important prior to any membrane plants as fibres may lead to tressing or blocking of the ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The HUBER RoMEM Screens is one of the range of high quality German manufactured screens that has been designed specifically for pre-MBR screening. Over 100 RoMEM screens are operational worldwide in large scale MBR plants protecting both flat sheet and hollow fibre ...
-
Manufactured by CDE Groupbased in NORTHERN IRELAND
HYDRO:GRADE screens and scrubs material to ensure effective removal of ...
-
Manufactured by Hydroflux Industrialbased in AUSTRALIA
The Hydroflux GT is a unique product that will remove grease, oils and solids from commercial kitchen wastewater to allow discharge of the wastewater to sewer. It offers a lower footprint than traditional DAF systems and utilises almost half the ...
-
Manufactured by Patrick Charles Pty Ltd. (PCPL)based in AUSTRALIA
FM Environmental Ltd (UK) are a partner of PCPL’s and through our association we offer technical support to their GREASE GUARDIAN range of mechanical oil and grease removal systems and packaged wastewater treatment plants in the ...
-
PremiumManufactured by Sauereisen Inc.based in USA
A two component epoxy lining system that is used to protect steel and other substrates from chemical attack and abrasion. ConoGlaze AR 207 is a two component epoxy lining system that is used to protect concrete, steel and other substrates from chemical attack and abrasion. ConoGiaze AR 207 is specifically formulated for maximum resistance to abrasion, heat and chemical attack typically found in ...
-
PremiumManufactured by Sauereisen Inc.based in USA
FibreCrete TL 215 (TANK LININGS) is a two-component, fiber-reinforced, epoxy lining system that is used to protect concrete/steel tanks, ducts, scrubbers and other immersion environments from chemical attack and abrasion. FibreCrete TL 215 is specifically formulated for immersion service for tanks and scrubbers in the chemical, power, and municipal ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Acidproof Concrete 54 - with almost a half century of successful, varied service - is the original acid-resistant material for gunite construction. For those applications that require a lower K factor, lightweight materials, or higher temperature resistance, 54LW is available. 54 Gunite is potassium silicate, acid-resistant refractories for use as monolithic linings in chimneys, ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Acidproof Concrete 54LW - with almost a half century of successful, varied service - is the original acid-resistant material for gunite construction. For those applications that require a lower K factor, lightweight materials, or higher temperature resistance. 54LW is potassium silicate, acid-resistant refractories for use as monolithic linings in chimneys, stacks, ducts, breechings, ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable deviation. Data should not be used for specification ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Chemical-Resistant Castable No. 35 is a gunitable, hydraulicallysetting, calcium aluminate cement. No. 35 is recommended for protection of concrete and steel surfaces from high temperatures, thermal shock, abrasion and chemical attack by mild acids or alkalies. No. 35 can eliminate costly firebrick or tile linings and is equally effective for new construction or rehabilitation ...
-
PremiumManufactured by Sauereisen Inc.based in USA
ConoGlaze HC 222 is a two-component, NovolaK epoxy lining system that is used to protect concrete, steel and other substrates from chemical attack. ConoGlaze HC 222 is specifically formulated for maximum resistance to heat and chemical attack typically found in flue-gas and refining applications. When used as a topcoat for ConoCrete or FibreCrete systems, ConoGlaze improves appearance and ease of ...
-
Manufactured by Huber SEbased in GERMANY
The grit trap design and dimensioning are fully compliant with international standards. The ROTAMAT® Ro6 is available as an aerated or unaerated unit. The decision on when to use the aerated or unaerated option is for example the specific ratio between the storm and dry weather flow and if any further grit treatment facilities are installed or ...
-
Manufactured by Mena Water FZCbased in UNITED ARAB EMIRATES
The most common chain scraper system scrapes sludge from the bottom and skims surface of the tank. A cross collector can be installed in the sludge hopper for transferring the sludge to the removal system. The rectangular scraper is designed to remove grease and oil and other floating solids from the surface of the wastewater and settlement tanks. Also settled down solids are ...
-
Manufactured by Mena Water FZCbased in UNITED ARAB EMIRATES
A high performance and low operating cost equipment. It consists of a long tank and a screw conveyor at its bottom that collects grit in a sump. The machine can be equipped with an aeration system for efficient FOG (Fats, Oil, Grease) ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you