Only show results in Michigan? Ok

grit chamber aeration (Grit Removal) equipment

  • Premium

    WesTech - Aerated Grit Chamber

    An Aerated Grit Chamber removes grit from wastewater streams.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Grit Removal Product line

  • Premium

    Sauereisen SewerGard Industrial - Model No. 210TN - Aggregate-Filled, Novolak Epoxy Material

    Sauereisen SewerGard Industrial No. 210TN is an aggregate-filled, NovolaK epoxy material. This lining system is specifically designed to protect concrete surfaces of industrial wastewater treatment structures and collection systems from chemical attack and physical abuse. SewerGard No. 210TN's non-sagging application properties permit economical ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - SewerGard - Industrial Wastewater Product line

  • Premium

    Sauereisen SewerGard - Model No. 210S - Spray Applied Polymer Lining for Municipal Wastewater

    Sauereisen SewerGard No. 210S is a fiber-filled, spray-applied lining specifically designed to protect concrete and steel surfaces of municipal wastewater treatment structures from chemical attack and physical abuse. No. 210S's application properties permit economical protection of new and rehabilitated substrates. When cured, No. 210S provides an ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - SewerGard - Municipal Wastewater Product line

  • Premium

    WesTech - Shafted Grit Screw Classifier

    The Shafted Grit Screw Classifier is a grit conveying and dewatering unit which typically receives grit slurry from a Vortex Grit Separator, an Aerated Grit Chamber, or a Grit Collector. The Shafted Grit Screw Classifier settling tank is designed to effectively separate and settle the grit from the water.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Grit Removal Product line

  • Premium

    WesTech - Gritt Mitt™ Grit Classifier

    The Gritt Mitt™ Classifier is a grit conveying and dewatering unit which typically receives a grit slurry from either a Vortex Grit Separator or an Aerated Grit Chamber. The Gritt Mitt settling tank is designed to effectively separate and settle the grit from the water. As the grit is conveyed out of the settling tank it is lightly washed, ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Grit Removal Product line

  • Premium

    EDI FlexCap - Diffusers

    EDI FlexCap™ diffusers are ideal for aeration applications where intermittent coarse bubble operation is desired. FlexCap units are available with either 3/8-inch or ¾-inch NPT threaded (male) inlet to allow quick and simple installation into threaded pipe applications. Optional UDM (Universal Diffuser Mount) is available and provides ...

    By Environmental Dynamics International (EDI) based in Columbia, MISSOURI (USA). from Diffuser Express Product line

  • Premium

    Sauereisen SewerGard - Model No. 210RS - Rotary Spray

    Sauereisen SewerGard No. 210RS is a rotary spray-applied material specifically designed to protect concrete and steel surfaces of municipal wastewater treatment structures from chemical attack and physical abuse. The application properties of No. 210RS permit economical protection of new and rehabilitated substrates.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - SewerGard - Municipal Wastewater Product line

  • Aircon - Model EWC - Grit Chamber Container

    Dry sand with aircon - the aerated grit chamber container. Aerated filter container for sludge that is more diffcult to dewater or sludge with high organic content. Aeration from the bottom creates new drainage channels that accelerate and improve the drainage and drying of the sludge. The built-in washer allows the flushing of organic parts ...

    By KUGLER Behälter- und Anlagenbau GmbH based in Nagold, GERMANY. from Dewatering Containers Product line

  • ProTechtor - Traveling Grit & Grease Bridges

    The traveling bridge system utilizes a dual basin configuration consisting of an aerated grit chamber and grease collection chamber. The energy baffles contain the grit and promote settling in the grit basin floor. The grit is then collected via a submerged grit pump attached to the traveling bridge. The grit slurry is fed to a grit classifier, or ...

    By Kusters Water, a division of Zima Corporation based in Spartanburg, SOUTH CAROLINA (USA). from Headworks Product line

  • Aerated Grit Tank Extraction Spirals / Screws

    Claro aerated grit extraction spiral systems fully-automate the extraction of grit slurry from municipal aerated grit settling tanks. Consisting of a special alloy shaftless spiral, a trough, special low-friction liners, a proprietary liquid seal, a gear drive, and submersible electronic motion sensors, our grit extraction system is a very ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Screening & Grit Removal Product line

  • Grit Washers / Sand Washers

    Claro is pleased to offer a high quality grit washer that washes and dewaters sediment extracted from various types of grit collection equipment including sewage treatment plant aerated grit chambers. Vibration and water jets thoroughly wash organics off of the collected grit and sand. Resultant grit meets the highest disposal standards. After ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Screening & Grit Removal Product line

  • ProTechtor - Headworks Complete Plants

    The Kusters Water HCP unit provides a total headworks solution for small and large facilities. The raw influent flow undergoes a series of pre-treatment processes including: Fine Screening, grit collection, grease collection and conveying.

    By Kusters Water, a division of Zima Corporation based in Spartanburg, SOUTH CAROLINA (USA). from Headworks Product line

  • Rotamat - Model Ro6 - Longitudinal Grit Trap

    The grit trap design and dimensioning are fully compliant with international standards. The ROTAMAT® Ro6 is available as an aerated or unaerated unit. The decision on when to use the aerated or unaerated option is for example the specific ratio between the storm and dry weather flow and if any further grit treatment facilities are installed or ...

    By Picatech Huber AG based in Horw, SWITZERLAND. from Grit Separation and Treatment Product line

  • BIOGEST AG - Model Type GESMO - Grit Trap

    Selective retention and removal of debris and grit from channels. In channels where combined sewage and storm water are conveyed, there are also some coarse substances, such as grit and sewage related debris. These coarse substances usually move more slowly than the water flow and often cause problems with downstream plant and equipment. In ...

    By BIOGEST AG based in Taunusstein, GERMANY. from Coarse Solids Retention Product line

  • ROTAMAT - Model Ro6 - Longitudinal Grit Trap

    The grit trap design and dimensioning are fully compliant with international standards. The ROTAMAT® Ro6 is available as an aerated or unaerated unit. The decision on when to use the aerated or unaerated option is for example the specific ratio between the storm and dry weather flow and if any further grit treatment facilities are installed or ...

    By Huber SE based in Berching, GERMANY. from Grit Separation and Treatment- Longitudinal Grit Traps Product line

  • PWL - Model Modular - Compact Unit

    The PWL compact unit MODULAR is a multifunction unit combining waste water sieving with the discharge of grit and grease in one compact system. Due to its modular design the PWL compact unit can be equipped appropriate to individual waste water conditions. Among all kinds of screens the MODULAR can be used with drum screens ...

    By PWL GmbH & Co. Anlagentechnik KG based in Bückeburg, GERMANY.

  • Model CP 5100 - Blower Control Panel

    The HSI CP 5100 is a controller that combines the full functions of the HSI CP 4100 Sequencing Panel and adds the ability to control most wastewater process systems. The CP 5100 is fully plug and play compatible with HSI Local Control Panels of MC Series (Multistage) and HT Series (Turbo) type of controllers. HSI can also customize to control ...

    By Houston Service Industries (HSI) based in Houston, TEXAS (USA).

  • Aquatec - Grit Removal System

    Grit particles which are smaller than the aperture of the screen will pass through and cause abrasive problems on pipes, pumps and sludge handling equipment. The grit particles can settle in channels, aeration tank floors and sludge digestors which can create maintenance problems. Therefore, a grit removal system is required for most sewage ...

    By Aquatec-Maxcon Pty Ltd based in Wulkuraka, AUSTRALIA. from Wastewater Treatment Product line

  • Centrifugal Blowers

    Centrifugal Blowers play an indispensable role in keeping the United State’s water supply pure. Centrifugal multi-stage blowers are used at municipal and industrial water and wastewater treatment plants. These quiet, high-quality blowers are designed and constructed to withstand continuous duty and to maintain constant pressure with clean, ...

    By Mooers Products, Inc. based in Milwaukee, WISCONSIN (USA). from Blowers Product line

  • FSM - Model KSF-K Series - Compact Plant

    The FSM compact unit type KSF-K offers high efficiency with a very small space requirement. Type KSF-K is designed for flow rates of 5 l/s and above. In combination with an upstream FSM screening unit, we provide an optimum installation for mechanical pre-treatment of waste water from one source.

    By FSM Frankenberger GmbH & Co. KG based in Pohlheim, GERMANY. from Compact Unit Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you