Only show results available in Connecticut? Ok

grit collector (Grit Removal) equipment

  • Premium

    WesTech - Grit Collector

    Typically, a grit collector follows sewage screening equipment. The WesTech shaft drive grit collector mechanism is mounted on a walkway which spans a wide shallow tank. This chamber is designed as a constant-level, short-detention settling tank for grit.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Grit Removal Product line

  • Premium

    Ovivo - Grit Collector

    Wastewater facilities that receive flows containing grit can be significantly impacted on operating costs, down time, maintenance resources, and can lead to unnecessary maintenance tasks, and in some cases, issues with permit compliance. The Ovivo Grit Collector is a cross flow grit system that utilizes a collector arm to move settled grit into a ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Inlet Works Product line

  • Premium

    Polychem - Heavy Grit Sludge Collector

    This system will help fight your heavy grit problems and protect against the associated wear it can cause. It is particularly useful for plants and communities near beaches as they often deal with a lot of influent sand.

    By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA). from Polychem Sludge Collectors - Packages Product line

  • WTP - Grit Collectors

    Automatic conveyor systems for grit removal from continuous or batch wastewater flows – shafted or shaftless grit conveyor screws for submerged duty in horizontal aerated grit tanks or as an inclined grit collector – with the drive unit located outside the tank for easy access.

    By WTP Equipment Corp. based in Brampton, ONTARIO (CANADA).

  • Link-Belt - Model AS - Grit Collector

    The Type AS Grit Collector is designed for small plants with flows up to 10 MGD. The unit consists of a hopper with an inclined screw and grit washer for removing and washing grit. Air is provided to maintain uniform velocities at all flows. The unit uses compressed air through diffusers to create and maintain circulating velocities of 1 to 2 fps. ...

    By WSG & Solutions, Inc. based in Montgomeryville, PENNSYLVANIA (USA). from Grit Removal Product line

  • ProTechtor - Circular Grit Collectors

    Kusters Water Circular Detritus Tank, Grit Collectors are available in sizes ranging from 8 ft to 40 ft in diameter. The grit collectors utilize scraper arms that are designed to move the settled grit to the exterior of the basin where it is then discharged to a grit classifier or grit washer. Standard flow capacity ranges from 1.0 – 64 mgd ...

    By Kusters Water, a division of Zima Corporation based in Spartanburg, SOUTH CAROLINA (USA). from Headworks Product line

  • PMC - Grit Collector & Chain Skimmer

    Available for up to 13m wide and 50m long tanks. Grit removal device. Scum removal device. Control panel.

  • Catenary Grit & Heavy Media Collectors

    The Catenary Grit Collector / Heavy Media Collector utilizes the Catenary in yet another application. This Catenary concept has the heavy duty chain and flights entering the chamber from the tail end of the chamber. The chain / flights are then pulled along the chamber floor, moving the settled grit or heavy media towards the inclined beach area. ...

    By E & I Corporation based in Westerville, OHIO (USA).

  • Premium

    WesTech - Shafted Grit Screw Classifier

    The Shafted Grit Screw Classifier is a grit conveying and dewatering unit which typically receives grit slurry from a Vortex Grit Separator, an Aerated Grit Chamber, or a Grit Collector. The Shafted Grit Screw Classifier settling tank is designed to effectively separate and settle the grit from the water.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Grit Removal Product line

  • Premium

    Jones+Attwood Crossflow - Grit Removal System

    The J+A Crossflow™ grit removal unit is typically installed between medium and fine screens to capture abrasive material. It features a wide and shallow square collection tank with a series of vertical baffles to assist in the equal distribution of the flow entering the tank. This design forms a recessed circular sump. Solids accumulate ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Inlet Works Product line

  • Premium

    ENTA - Recprotating Rake Classifier

    The rake classifier consists of reciprocating rake mechanism set in an inclined channel alongside the grit collection basin. The smooth agigation of grit caused by the low speed motion of the rake mechanism provides a perfect environment for the settled grits to liberate putrescible organics, leaving clean grit for discharge and reduced odour ...

    By ENTA Treatment Systems Engineering Contracting Corporation based in Seyrantepe-Sarıyer, TURKEY. from Screens Product line

  • Senqcia - Model HB 78 - Stainless Steel Chain

    Superior resistance to wear and corrosion of any 78 series chain. Stainless steel construction offers high load, chemical and corrosion resistance and extremely minimal stretch, especially when compared to non-metallic NH-78 style chains. Toughest chain for the harsh extremes of clarifier drives and similar applications. Economically priced this ...

    By Senqcia Maxco, Ltd. based in Kennesaw, GEORGIA (US) (USA). from Environmental Products - Chains Product line

  • Sand Grit Separators

    Finn chain’s grit collector removes the sand from the bottom of the tank to a removal channel. In the grit collector system, special solutions have been developed for the scraper flights and rails for them to endure the abrasion of sand. Grit collectors are customised according to the client’s tanks and process requirements.

    By Finnchain Oy based in Rauma, FINLAND. from Sludge Scrapers for Rectangular Tanks Product line

  • Amwell - Grit Removal

    Efficient removal of abrasives is essential to the prevention of wear and damage to mechanical equipment. AMWELL manufactures both aerated and non-aerated grit removal systems to handle any need. Several combinations of chain and flight collectors, dewatering screws, chain and bucket collectors, elevators, airlift pumps and circular grit ...

    By AMWELL - A Division of McNish Corporation based in Aurora, ILLINOIS (USA).

  • Fiberglass Composite Troughs

    Glass-Steel, Inc. manufactures a proprietary system of composite effluent troughs for water collection in the water/wastewater applications.  Troughs are typically used in clarifiers (both circular and rectangular), grit collectors, sedimentation basins, thickeners, filter systems, etc.  Glass-Steel, Inc.’s composite troughs offer ...

    By Glass-Steel, Inc. based in Conroe, TEXAS (USA).

  • Senqcia - Aluminum Flight

    Environmentally friendly. The Aluminum Flight from SENQCIA MAXCO is the easiest flight to install as it eliminates drilling or notching and does not require filler blocks. Available in two styles, Regular (perfect for tank widths up to 24 ft) and Heavy Duty for tank widths of up to 40 ft! An optional neoprene extrusion slides into the slotted ...

    By Senqcia Maxco, Ltd. based in Kennesaw, GEORGIA (US) (USA). from Environmental Products - Flights Product line

  • Viking - Model VCSS700 - Stainless Steel Collector Chain

    Designed to be compatible with VCSS700 series chain saver sprockets, and with other stainless steel manufacturer's components. Can be used with either fiberglass, aluminum or laminated wood flights. Hardened Pins and Bushings. 304SS Cotter. 6.00' Pitch. 33,000 lbs Average Ultimate Strength.

    By Viking Chains Enviro Group based in Delta, BRITISH COLUMBIA (CANADA). from Chain - Stainless Steel Product line

  • PROBIG - Chain and Flight Scrapers

    PROBIG is Number 1 for continuously operating treatment and scraping systems manufactured from high-tech non-metallic materials. We can offer you scraping systems for rectangular tanks up to a maximum of 140 m long and 14 m wide.  The range of applications of PROBIG® scraping systems manufactured from high-tech non-metallic materials is ...

    By Probig GmbH based in Vöcklamarkt, AUSTRIA.

  • Vandezande - Grit and Scum Remover

    In a water treatment plant the grit and scum remover separates grit (and oil and grease) from the contaminated medium. There are 2 different types of grit and scum removers: the circular grit and scum remover and the rectangular grit and scum remover. The feeding of the medium in the circular grit and scum remover basin is carried out via a supply ...

    By Vandezande bvba based in Diksmuide, BELGIUM.

  • Chemical-Physical Processes for Wastewater Treatment System

    Without chemical or physical processes, many substances could not be removed from wastewater. Depending on the wastewater’s composition, the process for chemical-physical wastewater treatment comprises several sub-steps. Often efficient solutions can only be achieved by combining those different process steps in the right order.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY. from Wastewater Treatment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you