Environmental Industry Equipment In New Brunswick
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-FLO Balance Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 16 gpm (1 L/s) to a maximum of 4 000 gpm (250 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-FLO balance regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process plants and is ...
-
PremiumManufactured by AMS, Inc.based in USA
You asked for it and we listened. No more threaded connections! The New AMS 3-1/4” Hex Quick Pin Sampling Kit allows for collection of both disturbed & relatively undisturbed core samples down to a depth of 12ft. This kit features hardened steel male/female hex connections that accept standard 3/8” snapper pins or heat treated 3/8” U-clips. The simplicity of the snap pins is ...
-
PremiumManufactured by AMS, Inc.based in USA
This one-piece regular soil auger is powder-coated (orange) for rust resistance. The auger comes equipped with a 16" rubber-gripped cross handle and has a total length of 53". The lightweight (4 to 5 lbs) one-piece regular soil auger is an inexpensive alternative to our auger-extension-cross handle systems for anyone not needing to go deeper than 4 feet. This one-piece soil auger has carbon steel ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS 3500 is the smallest of the AMS well management systems. It was designed for users with a limited number of wells to monitor. This capable unit is available with manual or hydraulic systems. The automated, hydraulic-driven boom with double-spool system will handle sampling jobs up to 300 ft deep. The SK-3500 is built on a self-contained skid that can easily be slid into or out of a ...
-
PremiumManufactured by AMS, Inc.based in USA
Professional Series Regular Augers feature the trusted AMS 3/4" threaded connection and have thicker cutting teeth with stronger welds and extra tungsten carbide hard surfacing. Professional augers are also reinforced with extra gussets welded at both the top and bottom of the bail. The gussets help prevent the bail from bending or twisting when augering into hard or rocky soils, or when the ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-FLAP Check Flap System is designed to prevent flooding and backflows caused by high downstream water levels. The SURE-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants is avoided and energy costs for pumping systems and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by AMS, Inc.based in USA
2-1/2" X 12" Split Soil Core Sampler w/ Core Tip, Hex Quick Pin. Split Soil Core Samplers are now available with 3/4" threaded and Hex Quick Pin connections! These samplers have a vertically split cylinder (Cup Set) that allows for easy extraction of soil cores that minimize the chance of disturbing the sample. It can be used without a liner to collect relatively undisturbed cores for immediate ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Conical temporary strainers provide a cost-effective solution for protecting downstream equipment from sediment and debris during pipeline start-ups and commissioning. Available in a wide variety of sizes, materials, and configurations to meet your specific needs. Designed for easy installation between piping flanges. ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME ENGINEERING PRODUCTS offers hot water boilers based on proven design for building complexes, commercial structures, and light industry. This boiler can be connected directly on the high voltage power distribution ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-DRUM Pivoting Drum System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, using a single flush. It has been used in CSO and SSO applications and can be used in agricultural and industrial applications to clean any batch ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-RAKE Self-Cleaning Bar Screen System is designed to remove debris from storm water overflow systems, combined sewer overflow (CSO) systems and sanitary sewer overflow (SSO) systems. The TRU-RAKE self-cleaning bar screen provides an economic and effective solution to protect against coarse floating and suspended matter entering receiving streams. The TRU-RAKE self-cleaning bar screen is ...
-
PremiumManufactured by AMS, Inc.based in USA
The ESS Lock N' LoadTM disposable soil core sampler is the easiest way to collect undisturbed, measured soil cores for field preservation techniques for EPA Method ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Y type Strainer is the most cost effective, Y strainer uses perforated wire mesh or wedge wire to trap unwanted solids from a process stream. Y strainer can be mounted vertically or horizontally in a piping system Strainers are low-cost solutions to large nominal bore straining ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Interface Meters provide measurements of both floating and sinking hydrocarbons (non-aqueous product layers). These battery powered, portable reel-mounted instruments uses include measuring oil and water levels in monitoring wells and detecting tank leakage. When the probe of the interface meter is lowered down a well and contacts the product layer, a solid tone and green light alarm is ...
-
PremiumManufactured by AMS, Inc.based in USA
Take direct readings of shear strength to depths up to 10 ft (3 meters) in soft to stiff clays. Three (3) vane sizes allow for the direct determination of un-drained shear strength of soft to stiff clays. The peak vane value is determined by a calibrated scale ring built into the head assembly. The cross handle is used both to push the vane to the desired test depth and apply the shearing torque. ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Flighted Screw Augers are designed for use in hard, rocky, and compacted soils.The AMS flighted screw auger is capable of creating a borehole in tough, hardened soil conditions in order to collect a disturbed sample. This robust soil auger is made from carbon steel, and features double-twisted flighting with smooth edges that allow for easy soil ...
-
PremiumManufactured by AMS, Inc.based in USA
Dual Purpose Soil Recovery Probes have a sample window in the probe body that allows for the collection of samples directly into the Soil Probe or into a liner. They feature the Reach-&-Grab system and use liners that are 1/8" smaller in diameter and 1-3/4" longer than the Soil Probe dimensions. They are made of nickel-plated chromoly or stainless steel, and they are compatible with 5/8" ...
-
PremiumManufactured by AMS, Inc.based in USA
The penetrologger has been especially developed to measure the resistance to penetration of the soil and to save the measuring results to digitally process them on a computer. The penetrologger is ergonomically designed, and lightweight. It can be used to measure to a depth of 80 cm. The penetrologger can provide the Unified Soil Classification System (USCS), the Vehicle Cone Index (VCI), and ...
-
PremiumManufactured by AMS, Inc.based in USA
Add Torque to your Gas Vapor Probe system!.The heavy-duty gas vapor probe kits have all of the components included in the regular GVP kits, but with the added benefit of flighted augers which allow you to penetrate rocky and hard soil conditions. The kit comes with enough flighted extensions to pre-bore a hole to a depth of 9 feet! The heavy duty GVP kits also come with a larger 2 1/2” ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you