Only show results available in Virginia? Ok

Hydrocarbon Contamination Applications

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Several waste gas streams: Highly contaminated oxygen-free waste gas, and medium waste gas stream

    Example: Chemical industry. Similar tasks: Petrochemical and pharmaceutical industries.

  • Premium

    Monitoring of hydrocarbons in bilge water

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Oil vapour removal for the manufacturing industry

    The mist eliminator prevents oil mist from contaminating air or soil, helping facilities to comply with environmental regulations. It also makes for a cleaner safer work environment by eliminating oil residue built-up on engine room floors, enclosure and stairwells, while improving indoor/outdoor air quality and reducing fire hazards. 

  • Premium

    Machine condition monitoring for oil in water/soil

    Overview

    Being able to trust your instruments to make quick, easy and accurate measurements in the field is key when dealing with regulatory requirements. The InfraCal2 infrared analyzer is the choice of experts for measuring oil in produced water; oil contamination in soil; and fats oil and greases in waste streams.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Treatment of industrial wastewater with high oil content

    This type of waste water is characterised by high oil and grease loads from hydrocarbons.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Rugged Mobile Technology for Contaminated Sites

    These handhelds use precise GPS information to speed cleanup of oil spill sites.

    By Hand based in Lidköping, SWEDEN.

  • Remedial Construction for Former Oil Field Production Sites

    - Remediation of 600 former production or release sites transecting four counties - Treatment of over 500,000 cubic yards of petroleum impacted soils from the various site areas in an 8-acre bioremediation landfarm - Remediated soils are then re-used as backfill throughout the disturbed areas

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Mining Applications Testing TPH in Soil

    Testing contaminated soils on-site for total petroleum hydrocarbons (TPH) is performed to monitor the progress of bioremediation activities at mining sites. Results only take a few minutes.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Determine Saybolt Color #3067

    Accurate online saybolt measurements from zero to +36. - Quantify yellowness for manufacturing control and product uniformity. - Ensure your product meets customer expectations - Detect potential cross-over contamination in fill or supply lines in real-time - Take the guess work our of product appearance standards - Application Note #3067

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • MPP water purification systems for industrial waste and process water application

    Removal of total spectrum of non-polar and polar hydrocarbons proven in practice: MPPE removes toxic, non-polar, non biodegradable compounds, aromatics, poly aromatics, halogenated, chlorinated, PCBs, THT (TetraHydroTiophene), Dioxins, CS2 etc. Folowed by biotreatment removing polar biodegradable compounds. Optional: UF and/or activated carbon filtration and RO for reuse as process or boiler feed water.

  • Produced water treatment for oil and gas industry

    Recycling, reusing or treating produced water does not always have to be expensive.  Most Oil & Gas companies manage more water than they do hydrocarbons.  While MIOX is not a 100% solution to all produced water treatment needs, it does do the heavy lifting.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Tank Bottom Remediation

    With a Vulcan® Systems Thermal Desorption Unit, hydrocarbons are separated from the solids in the sludge. The treated solids have little to no residual hydrocarbons, resulting in an end product that can be disposed of easily and cost-effectively.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • High performance separation system for ethylene industry

    Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers, dilution steam generator. Fouling reduces plant profitability and on-stream reliability.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • High performance separation system for silicones industry

    Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone resin.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Contaminated Soils with Diesel Fuel and Heating Oils

    Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Drill Cuttings Remediation

    With a Vulcan® Systems Thermal Desorption Unit, Hydrocarbons are separated from the solids in the sludge. The treated solids have little to no residual hydrocarbons, resulting in an end product that can be disposed of easily and cost-effectively. What makes our equipment unique? The ability to recover diesel or oil in a way which maximizes the resaleability of use as a fuel.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you