Hydrocyclones Equipment For Water And Wastewater Available In Bhutan
-
Manufactured by Drillmax, Inc.based in USA
Drillmax Inc. manufactures hydrocyclones, elbows and other parts for desanders, desilters and mud cleaners for all major OEM'S, including: Demco, Brandt, Swaco, Sweco, Harrisburg/NOV , Derrick, Crestex & others. Contact us for any additional ...
-
Manufactured by Elgin Separation Solutionsbased in USA
The KEMTRON 1500MPX is the industry’s first high-capacity mud reclamation system to feature a high-pressure pump that is electrically variable. Instead of using a clutch and belt / chain driven system, Elgin’s new KEMTRON 1500MPX deploys a direct coupled VFD-driven Ellis Williams WDD-550 HDD Quintuplex Pump that is powered from a single 500KW Tier 4 Final diesel-fired generator used ...
-
Manufactured by Lama Sistemas de Filtrado S.Lbased in SPAIN
Hydrocyclones perform their separation function by using the centrifugal force generated inside, as water is fed in at a tangent, at high speed. Particles with a higher specific weight than water are “trapped” in side pieces inside the hydrocyclone before falling into a holding tank located at the base of the equipment. Lama offers self-cleaning equipment, not included as standard. A ...
-
Manufactured by Calvette Mining Equipment Co.based in CHINA
The cyclone is a high-efficiency separation equipment that uses a centrifugal field to separate two-phase fluids. It has been used in processes such as classification, concentration, dehydration, desliming, separation, and washing. CALVETTE cyclones have been widely used in ferrous and non-ferrous metal mines, non-metal mines, coal mines, power plants, chemical industry, oil fields, construction ...
-
Manufactured by Asmko-Bis S.Cbased in POLAND
Hydrocyclone is a continuously operating device that uses centrifugal force to accelerate the sedimentation velocity of solids or liquids of different densities. The ASMKO-BIS company offers polyurethane hydrocyclones characterized by high strength and corrosion resistance. This results in longer service life than standard ...
-
Manufactured by Hudson Industriesbased in USA
Operating volumes to 5,000 gpm. Operating pressures 50-1500 psig. Custom engineered application, i.e. Oil and Gas Industry, Manufacturing,. Chemical Processing. Available in a variety of Materials. Oil Removal as low as 10-15 ppm of separable oil in ...
-
Manufactured by Terra Resources, Ltd.based in USA
The original Mk242D was delivered to a mine in the eastern Talkeetnas, approximately 100 miles off the road system. The Mk242D was improved as operations dictated, the original single hydrocyclone being replaced with 2 Linatex models that significantly reduced particulate reporting to the header ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The J+A screw classifier systems are free-standing units used for the separation of mineral grit from other types of solids. The screw classifier hopper maintains a water level through a series of weirs. A peripheral weir removes floating solids and a second weir positioned within the trough wall removes other solids that are lighter than grit. A hydrocyclone can be used to receive the flow and ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Within its class the KEMTRON 600HD2-DS has the highest rated hydraulic cleaning capacity at an impressive 600 gallons per minute (38 lps). Traditional systems offer single pass cleaning, while the KEMTRON 600HD2 features a multi-pass configuration, allowing each cut to be returned to the primary tank for continuous recirculation. This feature maximizes the shaker and hydrocyclone cleaning ...
-
Manufactured by Idra Italia Srl.based in ITALY
The hydrocyclone filter is a sand and inorganic particle separator with centrifugal action. The particular structure of the hydrocyclone creates a vortex of water which allows the separation of the heaviest particles due to the centrifugal force. The solid particles separated from the water are deposited in a special collection tray equipped with a convenient opening to be easily emptied. The ...
-
Manufactured by Gromatexbased in UNITED KINGDOM
The Gromatex Hydro Cyclones range consists of the C26, C20 and C15. The C26 is currently the largest of the Gromatex hydro cyclone range. It has a 660mm feed chamber and a 6” inlet. The medium sized C20 has a 500mm feed chamber and a 6” inlet while the smallest cyclone in the Gromatex hydro cyclone range is the C15 which has a 380mm feed chamber and a 4” inlet. All three ...
-
Manufactured by AKW Apparate Verfahren GmbHbased in GERMANY
Hydrocyclones are important and economically viable systems for the wet-mechanical separation and classifying processes of ores and minerals. AKA-VORTEX are applied across the industry in various areas: sorting, desliming, closed circuit grinding, solids recovery, ...
-
Manufactured by TangShan Dachuan Machinery Co., Ltd.based in CHINA
Desander is the second equipment in solids control system, it is used to separate the solid phase particles whose diameter is more than 44μm from drilling fluid. The desander produced by DC Machinery is widely used in worldwide, welcome to contact us to get the best solution for your ...
-
Manufactured by Potential Engineeringbased in INDIA
Hydrocyclone oil water separator is a skid-mounted packaged solution. It is a simple and most powerful oil water separator that does not use consumables or chemicals. In this separator oily water is pumped tangentially into the separator using a high-pressure low shear pump, it forms a powerful vortex and a huge centrifugal force. The centrifugal force is 1000 times stronger than the force of ...
-
Manufactured by H-Screeningbased in CHINA
The specially designed drilling mud hydrocyclone units are primarily used for removal of sand-size and silt-size particles from returned drilling fluids. Abrasion resistance polyurethane hydrocyclones are applied to the unit. The unit can be stonealone for use or assembled above our shale shaker through pre-designed connectors. The number of desander and desilter cones is customizable according ...
-
Manufactured by Valmetbased in FINLAND
An optimal solution for high-consistency, high-demand hydrocyclone applications. Operating at up to 2% consistency, this two-stage hydrocyclone features three forward hydrocyclones in one, single unit. Valmet Twister Hydrocyclone features Mid-cone Dilution Technology and delivers energy savings with lower applied energy and lower reject rates than conventional ...
-
Manufactured by FLSmidthbased in USA
Protect your investment with multiphase desanders for oil and gas. One of the greatest challenges in oil and gas production is solids accumulation. The latest generation in hydrocyclone technology, gMAX® is designed to meet the harsh conditions of the upstream market. KREBS gMAX Desanding Cyclones, produce finer and sharper separations and increased throughput at lower pressure ...
-
Manufactured by TH Companybased in SPAIN
TH designs and builds hydrocyclone equipment in a broad range of models and sizes to ensure high treatment capacity for the classification and separation of fine particles in solid/liquid suspensions. The modular design of HCH and HCM hydrocyclones means that their layout and operating conditions can be adapted so that the classification point can be set between 10 and 180 µm. This ...
-
Manufactured by King Slurry Pump Ltdbased in CHINA
The type ‘ZF’ Froth Pump is a vertical pump complete with hopper which utilises casings and liners from the Type ‘ZH’ pumps. It is designed to pump frothy slurries more efficiently by de-aerating or partially de-aerating the froth before it enters the pump head, utilising an induced vortex principal. The ‘ZF’ range is available in sizes ranging from 50mm up to ...
-
Manufactured by CYL Knife Valves S.L.based in SPAIN
The SL series is a bi-directional long face-to-face knife gate slurry valve designed to handle abrasive slurries from mineral extraction processes: iron ore, copper ore, gold ore, soda ash, phosphate, coal, gypsum, cement and limestone. Equipped with two heavy-duty, field replaceable rubber sleeves, ensures a bi-directional shutoff against heavy ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you