Hydrocyclones Equipment For Water And Wastewater Available In Philippines
-
Manufactured by AS Engineersbased in INDIA
Cyclone separators, also known as cyclonic separators or simply cyclones, are mechanical devices used for the separation and removal of particulate matter from gas or liquid streams. They are commonly used in industrial processes to control pollution and improve air or water quality. Cyclone separators work by utilizing centrifugal forces to separate particles from a gas or liquid stream. The gas ...
-
Manufactured by Drillmax, Inc.based in USA
Drillmax Inc. manufactures hydrocyclones, elbows and other parts for desanders, desilters and mud cleaners for all major OEM'S, including: Demco, Brandt, Swaco, Sweco, Harrisburg/NOV , Derrick, Crestex & others. Contact us for any additional ...
-
Manufactured by Potential Engineeringbased in INDIA
Hydrocyclone oil water separator is a skid-mounted packaged solution. It is a simple and most powerful oil water separator that does not use consumables or chemicals. In this separator oily water is pumped tangentially into the separator using a high-pressure low shear pump, it forms a powerful vortex and a huge centrifugal force. The centrifugal force is 1000 times stronger than the force of ...
-
Manufactured by H-Screeningbased in CHINA
The specially designed drilling mud hydrocyclone units are primarily used for removal of sand-size and silt-size particles from returned drilling fluids. Abrasion resistance polyurethane hydrocyclones are applied to the unit. The unit can be stonealone for use or assembled above our shale shaker through pre-designed connectors. The number of desander and desilter cones is customizable according ...
-
Manufactured by Elgin Separation Solutionsbased in USA
The KEMTRON 1500MPX is the industry’s first high-capacity mud reclamation system to feature a high-pressure pump that is electrically variable. Instead of using a clutch and belt / chain driven system, Elgin’s new KEMTRON 1500MPX deploys a direct coupled VFD-driven Ellis Williams WDD-550 HDD Quintuplex Pump that is powered from a single 500KW Tier 4 Final diesel-fired generator used ...
-
Manufactured by Lama Sistemas de Filtrado S.Lbased in SPAIN
Hydrocyclones perform their separation function by using the centrifugal force generated inside, as water is fed in at a tangent, at high speed. Particles with a higher specific weight than water are “trapped” in side pieces inside the hydrocyclone before falling into a holding tank located at the base of the equipment. Lama offers self-cleaning equipment, not included as standard. A ...
-
Manufactured by Idra Italia Srl.based in ITALY
The hydrocyclone filter is a sand and inorganic particle separator with centrifugal action. The particular structure of the hydrocyclone creates a vortex of water which allows the separation of the heaviest particles due to the centrifugal force. The solid particles separated from the water are deposited in a special collection tray equipped with a convenient opening to be easily emptied. The ...
-
Manufactured by Airsysbased in SOUTH KOREA
The replaceable cylinder liners which is made of abrasion resistant materials and inserting into the cyclone housing. It is convenient to change the classification point by means of replacing the structural elements. Liner's materials are nature & synthetic rubber, urethane rubber, abrasion resistant steel alloy, ceramic, silicon carbide etc. Feed chamber, cylinder & long cone section are ...
-
Manufactured by Gromatexbased in UNITED KINGDOM
The Gromatex Hydro Cyclones range consists of the C26, C20 and C15. The C26 is currently the largest of the Gromatex hydro cyclone range. It has a 660mm feed chamber and a 6” inlet. The medium sized C20 has a 500mm feed chamber and a 6” inlet while the smallest cyclone in the Gromatex hydro cyclone range is the C15 which has a 380mm feed chamber and a 4” inlet. All three ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Within its class, the KEMTRON 1000HDX™ Packaged Mud Recycling System has the highest rated hydraulic cleaning capacity at an impressive 1,000 gallons per minute (63 lps) flow rate. Featuring two dual-deck, six-panel Hyper-G shakers, with a total 112 sq. ft. (10.4 m2) of screening surface that provide substantially more cleaning capacity when dealing with large bores. Initial scalping cut ...
-
Manufactured by TangShan Dachuan Machinery Co., Ltd.based in CHINA
Desander is the second equipment in solids control system, it is used to separate the solid phase particles whose diameter is more than 44μm from drilling fluid. The desander produced by DC Machinery is widely used in worldwide, welcome to contact us to get the best solution for your ...
-
Manufactured by Elgin Separation Solutionsbased in USA
The KEMTRON 200HD2™ is ideal for today’s contractors looking to process 65 to 200 gallons per minute (4.1 to 16.6 lps) in a compact, user-friendly design. This system pairs perfectly with operators running rigs like the Ditch Witch JT20 & JT30, Universal 22×22 & 32×40 and Vermeer 20×22 & 36×50 or similar. Traditional systems offer single pass ...
-
Manufactured by CYL Knife Valves S.L.based in SPAIN
The SL series is a bi-directional long face-to-face knife gate slurry valve designed to handle abrasive slurries from mineral extraction processes: iron ore, copper ore, gold ore, soda ash, phosphate, coal, gypsum, cement and limestone. Equipped with two heavy-duty, field replaceable rubber sleeves, ensures a bi-directional shutoff against heavy ...
-
Manufactured by AKW Apparate Verfahren GmbHbased in GERMANY
Hydrocyclones are important and economically viable systems for the wet-mechanical separation and classifying processes of ores and minerals. AKA-VORTEX are applied across the industry in various areas: sorting, desliming, closed circuit grinding, solids recovery, ...
-
Manufactured by Townley Engineering & Manufacturing Co., Inc.based in USA
Perfect for sand, silica, phosphate, clay and other mining applications where repeatable separation and sizing of fine particles is important. Townley hydrocyclones are designed and manufactured with replaceable Towniprene urethane cone body and apex, and include a mating urethane lined feed chamber and vortex ...
-
Manufactured by Ecomax Engineeringbased in UZBEKISTAN
Hydrocyclones are used to treat waste water from metallurgical plants, factories for the production of ceramic products, glass, building materials containing particles of sand, scale, glass, ceramics, etc. The principle of operation of hydrocyclones is based on the separation of solid phase particles in a rotating fluid ...
-
Manufactured by FLSmidthbased in USA
Helping you make the right choice in cyclone/separation technology. KREBS® gMAX® Special Industrial Cyclones form the foundation of a sound separation process and are fully customisable for your unique process requirements. Delivering proven, durable and reliable operation for maximum solids recovery, they provide unmatched protection of downstream operations at minimal cost. ...
-
Manufactured by Calvette Mining Equipment Co.based in CHINA
The cyclone is a high-efficiency separation equipment that uses a centrifugal field to separate two-phase fluids. It has been used in processes such as classification, concentration, dehydration, desliming, separation, and washing. CALVETTE cyclones have been widely used in ferrous and non-ferrous metal mines, non-metal mines, coal mines, power plants, chemical industry, oil fields, construction ...
-
Manufactured by Terra Resources, Ltd.based in USA
The original Mk242D was delivered to a mine in the eastern Talkeetnas, approximately 100 miles off the road system. The Mk242D was improved as operations dictated, the original single hydrocyclone being replaced with 2 Linatex models that significantly reduced particulate reporting to the header ...
-
Manufactured by Hudson Industriesbased in USA
Operating volumes to 5,000 gpm. Operating pressures 50-1500 psig. Custom engineered application, i.e. Oil and Gas Industry, Manufacturing,. Chemical Processing. Available in a variety of Materials. Oil Removal as low as 10-15 ppm of separable oil in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you