Hydrology Equipment For Water And Wastewater In Vietnam
-
Manufactured by CAE S.p.Abased in ITALY
Eagle flanks traditional hydro-meteorological, hydrological, etc. parameter measurement equipment allowing acquisition, local recording and real-time transmission of images of the area to be monitored or of significant details, in both scheduled and extemporaneous mode. This camera is particularly suitable for use in critical conditions; it has, in fact, been designed with those applications ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The BaroVUE™10 is a highly accurate barometer that can measure pressures over a range of 500 to 1100 hPa and can be used in a range of applications that includes meteorology and hydrology. This sensor includes our zero downtime recalibration. Other sensors on the market need to be taken offline and sent back to the manufacturer to be recalibrated, often for weeks at a time, causing a loss ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AL200 is an ALERT2 encoder and modulator that supports ALERT2 and ALERT-concentration services. It meets the ALERT2 standards maintained by National Hydrologic Warning Council (NHWC) and ALERT Users Group (AUG). ALERT2 improves the accuracy and performance of flood warning systems and software, by providing you with faster data transfer, forward error correction, and a TDMA ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The NR-LITE2, manufactured by Kipp & Zonen and cabled for use with Campbell Scientific data loggers, is a rugged net radiometer that measures the energy balance between incoming short-wave and long-wave infrared radiation relative to surface-reflected short-wave and outgoing long-wave infrared radiation. It is directly connected to a Campbell Scientific data logger and is widely used in ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CR300 is a multi-purpose, compact measurement and control data logger. This small, low-cost, high-value data logger offers fast communications, low power requirements, built-in USB, and excellent analog input accuracy and resolution. The CR300 can measure most hydrological, meteorological, environmental, and industrial sensors. It concentrates data, makes it available over varied networks, ...
-
Manufactured by Campbell Scientific, Inc.based in USA
With an AVW200 vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of structural, hydrological, and geotechnical applications because of their stability, accuracy, and durability. The VSPECT technology is protected under U.S. Patent No. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW216 is a vibrating-wire analyzer module that includes an internal 2.4 GHz spread-spectrum radio for wireless communication in many countries worldwide. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of structural, ...
-
Manufactured by LAMBRECHT meteo GmbH - an AEM brandbased in GERMANY
The sensor TH[pro] is a combined measuring instrument for measuring relative humidity and air temperature. The sensor is characterised by by high accuracy and energy-saving electronics. Also with Modbus or customised protocols ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CR1000X is our flagship data logger that provides measurement and control for a wide variety of applications. Its reliability and ruggedness make it an excellent choice for remote environmental applications, including weather stations, mesonet systems, wind profiling, air quality monitoring, hydrological systems, water quality monitoring, and hydrometeorological ...
-
Manufactured by Stevens Water Monitoring Systems, Inc.based in USA
The Stevens V2TH and V4TH satellite antenna provides a cost effective, high performance geostationary satellite data telemetry link for hydrological and meteorological data transmissions. The helix design virtually eliminates all existing problems that occur with other available antenna ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The LevelVUE™B10 is a cost-effective, accurate, reliable solution for water-level measurements based on a non-submersible pressure transducer system. This type of sensor is a bubbler. Bubblers accurately measure the pressure it takes to create a continuous airflow in an airline submerged in water. The LevelVUE™B10 is designed for ease of use while providing long-term performance and accuracy. ...
-
Manufactured by Onset Computer Corporationbased in USA
Measure oxygen concentrations in lakes, streams, rivers, estuaries, and coastal waters with the HOBO U26 Dissolved Oxygen Data Logger. This affordable and precise data logger is recommended for aquatic biology and hydrology research projects. The HOBO U26 uses RDO® Basic (Rugged Dissolved Oxygen) optical DO sensor technology and is easy to maintain. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW206 is a vibrating-wire analyzer module that includes an internal 910 to 918 MHz spread-spectrum radio for wireless communication, typically used in the U.S. and Canada. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW211 is a vibrating-wire analyzer module that includes an internal 920 to 928 MHz spread-spectrum radio for wireless communication, typically used in Australia and New Zealand. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The RainVUE 10 is ideal for many hydrological or meteorological applications such as weather stations and flood warning systems. The RainVUE 10 is an SDI-12 tipping bucket rain gage in the RainVUE™ï¸ family of products. Advanced algorithms and digital processing within the sensor compensate for errors caused by high-intensity rain and provide accurate precipitation and intensity ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AL205R is an ALERT2 repeater/transceiver that is configured to support repeating ALERT2 messages. With two radio I/O, independent receiving and transmitting radios are supported. Three serial ports allow for input and output to several devices, including an ALERT receiver, data logger, PC, and serial server. Local and remote data collection and administration are possible through the micro ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AL205B is an ALERT2 receiver that is configured to support receiving ALERT2 messages typically used at base stations. The AL205B is configured with a radio receiver. Three serial ports allow for input and output to several devices including a data logger, PC, and serial media converters. Local and remote data collection and administration are possible through the micro USB console and ...
-
Manufactured by Stevens Water Monitoring Systems, Inc.based in USA
The Stevens V2TH and V4TH satellite antenna provides a cost effective, high performance geostationary satellite data telemetry link for hydrological and meteorological data transmissions. The helix design virtually eliminates all existing problems that occur with other available antenna ...
-
Manufactured by LAMBRECHT meteo GmbH - an AEM brandbased in GERMANY
The FTS DigiTemp submersible water temperature sensor a rugged SDI-12 sensor for measuring the temperature of soil, water or other liquids with scientific- grade accuracy and long-term reliability. It makes adding automatic temperature monitoring to existing stations incredibly easy and cost-effective. DigiTemp is small enough to easily deploy through standard 1” (2.5 cm) PVC conduit with ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The RainVUE 20 is ideal for many hydrological or meteorological applications such as weather stations and flood warning systems. The RainVUE™ï¸20 is an SDI-12 tipping bucket rain gage in the RainVUE family of products. Advanced algorithms and digital processing within the sensor compensate for errors caused by high-intensity rain and provide accurate precipitation and intensity ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you