Hydrophones Equipment For Water And Wastewater Available In Northern Ireland
-
ShowcaseManufactured by Onda Corporationbased in USA
The HM Series membrane hydrophones are designed for measuring pulsed ultrasound fields. Their extremely flat sensitivity results in the best reproduction of acoustic waveforms. Version A is the traditional hydrophone configuration, and a more rugged version B prevents membrane vibration during scanning motion. Version A is recommended for high power ultrasound work, where the absorption of energy ...
-
PremiumManufactured by Onda Corporationbased in USA
Monitor Your Ultrasonic Cleaner: Introducing Our Externally Mounted Cavitation Monitoring Sensor (CMS). Our externally positioned Cavitation Monitoring Sensor (CMS) offers a solution for unobtrusive, continuous observation of cavitation performance within your ultrasonic ...
-
PremiumManufactured by Onda Corporationbased in USA
The HGL hydrophone has been established as a workhorse for diagnostic level measurements, providing the best mix of frequency response, reflection profile, and aperture size. The HGL Series hydrophones were designed to meet or exceed recommendations of section 3.3.2 of the AIUM Acoustic Output Measurement Standard (May 1998). They have an exceptionally flat sensitivity in a small and sturdy ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The ULF Compact Sub-Bottom Profiler is ideal for applications that require high resolution CHIRP sub- bottom images along with deeper penetration in difficult sediments such as hard-packed ...
-
PremiumManufactured by Onda Corporationbased in USA
The MCT-2000 combines the power of a high speed digitizer, spectrum analyzer, and advanced microprocessor to produce an acoustic pressure spectrum. Different components in the spectrum are analyzed to quantify the fundamental frequency and pressure from the direct field, stable cavitation, and transient cavitation. Specifically, the pressure within the fundamental frequency peak represent the ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Professional PC correlation - perfect results with completely digital technology. With the SeCorr 300, completely digital signal processing and transmission by and large eliminates the interference which so often causes problems in conventional correlators. The digital radio eradicates the notorious hissing in transmission paths. Even the narrow bandwidth of analogue modules no longer poses a ...
-
PremiumManufactured by Onda Corporationbased in USA
Onda develops and manufactures innovative OEM cavitation sensors for integration into ultrasonic cleaning systems to continuously or routinely monitor the acoustic stability. The integrated sensor technology leverages from extensive experience developing and manufacturing hydrophones used for various industrial and medical ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
PremiumManufactured by Onda Corporationbased in USA
The HCT hydrophone offers a reliable solution to characterize and monitor the acoustic properties of cavitation vessels, like ultrasonic cleaners. Its unique single point sensing design allows measurements with high spatial resolution to offer true 3-dimensional mapping of the cleaning tank. The rugged construction allows routine mapping of the acoustic pressure and ultimately determination of ...
-
PremiumManufactured by Onda Corporationbased in USA
The OptiSon® Beam Analyzer quantifies beam plots, focal distances and total power from a single image. Power measurements correlate to radiation force balance and hydrophone - as does tomographic reconstruction for intensity. It can have higher spatial resolution than mechanical scanning and is invulnerable to high intensities or rough ...
-
PremiumManufactured by Onda Corporationbased in USA
The CTS Scanner enables hydrophone mapping to be done automatically, using the HCT hydrophone. The scanner is customized to mount to substrate carriers, eliminating the need for positioning alignment. Because the shaft diameter of the HCT hydrophone is only ~3 mm, 2D acoustic plots can be acquired in “loaded” configurations to simulate actual conditions in the cleaning process (e.g., ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 Bubble GunIM systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by Onda Corporationbased in USA
The HCT hydrophone with MCT-1200 Digital Pressure Meter is a trustworthy instrument to characterize and monitor the relative acoustic cavitation in ultrasonic cleaning systems. Its unique single point sensing design allows localized measurements to generate true 3-cimensional acoustic maps of the cleaning ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Sub-bottom profiling applications in diverse sediments require multiple frequency bands to support a wide variety of survey requirements. The HMS-622 CHIRPceiverTM and its Family of Transducer Arrays and Vehicles can fill this wide range of survey needs. The frequency bands supported by the HMS-622 include standard LF (1KHz- 10KHz), and optional ULF (200Hz-2KHz) and HF (8KHz- 23KHz). It can be ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
Ultra-compact and extremely easy to use – the AQUASCAN 620L laptop correlator utilizing both the legendary, industry-leading cordless AQUASCAN sensor-transmitters and the powerful “Auto Filter” ...
-
PremiumManufactured by Onda Corporationbased in USA
The HNP Series needle hydrophones are excellent sensors for laboratory use in ultrasonic field mapping, with pinpoint access and good spatial resolution. While they have lower sensitivity than the HNC series, these hydrophones have a flatter response and better ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 ORD Bubble Gun systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by Onda Corporationbased in USA
A broad mix of preamplifiers are offered to support your application. There are several submersible preamplifier models offered: AH-2010, AH-2020, and AG-2010. The ATH-2000 in-line attenuator is also available to provide a larger dynamic range. Finally, there are a variety of hydrophone mounts, adapters and cables available to provide best access to the measurement working area. ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Sub-bottom profiling applications in diverse sediments in shallow water environments require compact tools as well as multiple frequency bands to support a variety of survey requirements. The HMS-621 CHIRPceiver LittTM and transducer arrays fill this wide range of survey needs. The user selectable frequency bands supported by the HMS-621 include standard LF (1KHz-10KHz), or HF (8KHz-23KHz). It ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
A permanently installed leak monitoring system for trunk mains that is both very sensitive (using correlating hydrophone sensors) and at the same time able to work independently for at least 5 years, using solar power for its data gateways. The data is sent to the GUTERMANN CLOUD allowing utilities to pinpoint leaks and investigate them ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you