Industrial Cooling Articles

  • Micro Pulse Lidar: Perfect Tool for Atmospheric Research

    Micro pulse style lidars are active remote sensing tools proven to be highly useful in atmospheric research. This style of backscatter lidar has been around for decades; however, incremental improvements in photon counting, sensitivity, polarization, optical filters, coatings, and precision machining of each element support increasingly accurate analysis. Each iteration of the ...

  • Borescope Helps Improve Furnace Operations for Glass Producer Holophane - Case study

    INTRODUCTION Holophane, a leader in Lighting solutions since 1921, has implemented AMETEK Land's new Near Infrared Borescope (NIR-B) Glass, an enhanced thermal imager, at its plant in France and now is reaping major benefits by accurately measuring temperature within its glass melt tank. ABOUT HOLOPHANE For nearly a century, Holophane has produced and ...


    By AMETEK Land

  • SAPA Profiles UK Reaps Benefits of New Temperature Measurement Solution - Case study

    5APA Profiles UK has implemented AMETEK Land's new SPOT AL EOS (SPOT Aluminium Extrusion, Quench and Strip) pyrometers at its aluminium extrusion plant in Tibshelf, Derbyshire, and reaps major efficiencies and performance benefits by accurately measuring temperature of low and variable emissivity aluminium. This innovative new SPOT AL EQ5 pyrometer from AMETEK Land, the leading industrial ...


    By AMETEK Land

  • Case study: MODEL: EWB3.1690 - WATER COOLED LIQUID CHILLER FOR ENGINE TESTING

    Project Requirements Cooling Request: 552 kW Inlet/Outlet Evaporator Fluid Temperatures: -15/-20°C Condenser Water Temperature In/Out: 30 / 35°C Refrigerant: R449A Number of unit: 2 Destination: Romania Process Fluid: 45% ethylene ...


    By Hitema International

  • Top 5 Advantages of Advanced Electrocoagulation Water Treatment

    Coagulation is a common practice in water and wastewater treatment processes, often used prior to filtration or sedimentation. Particles in the solution have a difficult time settling due to their common charges, which cause them to repel one another. To combat the repellant forces, the charges of the particles must be neutralized so that the colloids will cling together and precipitate, which is ...

  • Danfoss, Nordborg, Denmark - Case Study

    ELTS 1500 Capacity of 1500 l/h This plant treats oil emulsion from the metal working industry. The feeding water has a content of oil of 5-10%. Through a 2 step evaporator the liquid is being reduced, resulting in a content of oil of 90-95%, which is high enough for being used as fuel. The 2 steps consist of one natural ...

  • Innovative Application of Rooftop Railing - Case Study

    This particular application of KEEGUARD fall protection required creativity and ingenuity. There were many obstacles that made the installation of a straight run of guardrail unworkable. The railing had to go around air ducts, attach to some existing rail, and, in some cases, be mounted to the outer brick wall because of heating and cooling units ...


    By Kee Safety, Inc.

  • Destruction of ozone depleting substances - Case study

    Destruction of ODSs ODSs are substances that cause the depletion of the ozone layer. Depletion is typically caused by the photo-dissociation of halocarbons and catalytic destruction of ozone by the resulting atomic halogens. The majority of these halocarbons are man-made and have such serious affects to the ozone requiring control synchronized by the Montreal Protocol. ...

  • BCP™ 1015 - Legionella Control Program - Case Study

    A Major Commercial complex with 5,500 RT HVAC system using BCP™ 1015 (Classic DTEA II™ ) for: Legionella Bacteria Control Program (BCP™ ) Biofilm Control Program (BCP™ ) Cleaner/Penetrant Aid/Dispersant Cooling System Before Application of BCP™ 1015 (Classic DTEA II™ ) Cooling System After Application of BCP 1015 ...


    By AMSA, Inc.

  • BCP™ 2430 - Detergent Manufacturing Facility - Injection Mold Cooling System - Bio-organic & Corrosion Deposit Control - Case Study

    Problem – Plastic Bottle Mold Defects A bottle manufacturing plant in Utah was experiencing high reject rates due to poor injection mold cooling. This resulted in high plastic recycle costs and the need to extend mold change times for extensive cleaning of the molds’ cooling channels. Cause of Problem - Biofouling Poorly controlled microbial ...


    By AMSA, Inc.

  • BCP™ 1015 - In an Air Scrubber System and condenser water loop bio-organic deposit clean-up and control - Case Study

    Problem 1 – Fouled Air Scrubber System Image 1: Before BCP™ 1015 treatment: foam & biomass material collected at the screen An air scrubber system located in a high ammonia environment with a low pH (2.8) water and conductivity ofLess than 1000 was exhibiting significant biomass build-up. When screens were pulled for cleaning, the mesh ...


    By AMSA, Inc.

  • Oil flow rate monitoring in Carpet ovens - Case study

    A manufacturer of flooring systems is using the IC-LPM inline paddlewheel meter to monitor the flow of oil through chilled textile rollers in it carpet substrate ovens. Forbo is an internationally recognised manufacturer of vinyl, linoleum and carpet floor coverings. More Information In its carpet substrate ovens, Forbo uses chilled textile rollers, cooled by oil flow, to prevent the ...


    By iCenta Controls Ltd

  • UNIPER Maasvlakte power plants - Case study

    Project Facts The UNIPER power plant, Maasvlakte (MPP3) is located adjacent to Rotterdam harbour on the North Sea coast and has a capacity of 1100 MW netto. The Power Plant utilises seawater for cooling of the condenser during the energy generating process. The seawater is extracted from the Europahaven and discharges the warmed seawater into an exhaust basin that flows out through the joint ...

  • CNC Cutting Service

    The commonly used CNC cutting services are mainly divided into flame cutting services and plasma cutting services, each of which has its own advantages. What is the main difference? Principles of CNC cutting service Flame cutting is the oldest form of thermal cutting. It raises the temperature of the flame through the combination of ...

  • Ideal for onsite chlorine applications - Case Study

    Water treatment could be applied to various fields, our anodes are currently used for Sodium Hypochlorite and Electrolysis of water. Sodium hypochlorite (NaOCl) is a compound that can be effectively used for water purification. It is used on a large scale for surface purification, bleaching, odor removal and water disinfection. It can be also applied in sanitary wastewater and industrial ...


    By BioMicrobics, Inc.

  • Cooling Tower Trash Racks and Flow Straghteners Case Study

    The trash racks and flow straighteners were 19-feet deep by 16-feet wide with a clear spacing of 2 ¾”. Materials used in the fabrication and assembly of these units included: pultruded FRP structural components and HDPE blades. The trash racks were shipped fully assembled and ready for installation. They came with lifting ...

  • The Power of Reclaimed Water

    Power generation need not be another source of strain on diminishing freshwater resources. Well-established water reclamation technologies are enabling producers to conserve resources and money. Meeting the needs of a planetary population expected to surpass eight billion people by 2025 is requiring more output from fewer resources. In the case of dwindling supplies of ...


    By Veolia Water Technologies

  • Best practices for tough sample grinding in molecular biology using Precellys®

    The biggest challenge when working with fibrous, elastic and tough samples is efficient sample processing. The presence of elastic tissue, calcium phosphate (a rock-hard mineral) and other minerals can develop into a solid and tough matrix which can sometimes be difficult to homogenize. Moreover, heat generation inside the lysing kit tubes during the process results in degradation and ...


    By Bertin Instruments SAS

  • Briquetting – for more efficiency

    Normal 0 21 false false false ...

  • Aerobic treatment for Reuse of Wastewater at Fish processing plant - Case study

    Advanced technology treats difficult effluent for reuse and eliminates the need to buy imported water ...


    By Fluence Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you